openwrtv3/target/linux/ramips/dts/PSG1218.dts

/dts-v1/;

#include "mt7620a.dtsi"

/ {
	compatible = "PSG1218", "ralink,mt7620a-soc";
	model = "Phicomm PSG1218";

	gpio-leds {
		compatible = "gpio-leds";

		blue {
			label = "psg1218:blue:status";
			gpios = <&gpio0 10 1>;
		};

		yellow {
			label = "psg1218:yellow:status";
			gpios = <&gpio0 11 1>;
		};

		red {
			label = "psg1218:red:status";
			gpios = <&gpio0 8 0>;
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;

		reset {
			label = "reset";
			gpios = <&gpio0 1 1>;
			linux,code = <0x198>;
		};
	};
};

&gpio0 {
	status = "okay";
};

&spi0 {
	status = "okay";

	m25p80@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		reg = <0>;
		linux,modalias = "m25p80", "en25q64";
		spi-max-frequency = <10000000>;

		partition@0 {
			label = "u-boot";
			reg = <0x0 0x30000>;
			read-only;
		};

		partition@20000 {
			label = "u-boot-env";
			reg = <0x30000 0x10000>;
			read-only;
		};

		factory: partition@30000 {
			label = "factory";
			reg = <0x40000 0x10000>;
			read-only;
		};

		partition@40000 {
			label = "firmware";
			reg = <0x50000 0x7b0000>;
		};
	};
};

&pinctrl {
	state_default: pinctrl0 {
		gpio {
			ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
			ralink,function = "gpio";
		};

		pa {
			ralink,group = "pa";
			ralink,function = "pa";
		};
	};
};

&ethernet {
	pinctrl-names = "default";
	pinctrl-0 = <&ephy_pins>;
	mtd-mac-address = <&factory 0x28>;
	mediatek,portmap = "llllw";
};

&pcie {
	status = "okay";

	pcie-bridge {
		mt76@0,0 {
			reg = <0x0000 0 0 0 0>;
			device_type = "pci";
			mediatek,mtd-eeprom = <&factory 0x8000>;
			mediatek,2ghz = <0>;
		};
	};
};

&wmac {
	ralink,mtd-eeprom = <&factory 0>;
};