openwrtv3/target/linux/ar71xx/patches-4.4/930-chipidea-pullup.patch

81 lines
2.8 KiB
Diff
Raw Normal View History

Index: linux-4.4.4/drivers/usb/chipidea/ci.h
===================================================================
--- linux-4.4.4.orig/drivers/usb/chipidea/ci.h 2016-03-31 21:39:23.571126980 +0300
+++ linux-4.4.4/drivers/usb/chipidea/ci.h 2016-03-31 21:39:23.567126980 +0300
@@ -199,6 +199,7 @@
* @in_lpm: if the core in low power mode
* @wakeup_int: if wakeup interrupt occur
* @rev: The revision number for controller
+ * @dp_always_pullup: keep dp always pullup at device mode
*/
struct ci_hdrc {
struct device *dev;
@@ -248,6 +249,7 @@
bool in_lpm;
bool wakeup_int;
enum ci_revision rev;
+ bool dp_always_pullup;
};
static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
Index: linux-4.4.4/drivers/usb/chipidea/core.c
===================================================================
--- linux-4.4.4.orig/drivers/usb/chipidea/core.c 2016-03-31 21:39:23.571126980 +0300
+++ linux-4.4.4/drivers/usb/chipidea/core.c 2016-03-31 21:41:33.159130168 +0300
@@ -883,7 +883,7 @@
{
ci_hdrc_gadget_destroy(ci);
ci_hdrc_host_destroy(ci);
- if (ci->is_otg)
+ if (!ci->dp_always_pullup && ci->roles[CI_ROLE_GADGET])
ci_hdrc_otg_destroy(ci);
}
@@ -933,6 +933,9 @@
ci->supports_runtime_pm = !!(ci->platdata->flags &
CI_HDRC_SUPPORTS_RUNTIME_PM);
+ ci->dp_always_pullup = !!(ci->platdata->flags &
+ CI_HDRC_DP_ALWAYS_PULLUP);
+
ret = hw_device_init(ci, base);
if (ret < 0) {
dev_err(dev, "can't initialize hardware\n");
@@ -998,7 +1001,7 @@
goto deinit_phy;
}
- if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
+ if (!ci->dp_always_pullup && ci->roles[CI_ROLE_GADGET]) {
ret = ci_hdrc_otg_init(ci);
if (ret) {
dev_err(dev, "init otg fails, ret = %d\n", ret);
Index: linux-4.4.4/drivers/usb/chipidea/otg.c
===================================================================
--- linux-4.4.4.orig/drivers/usb/chipidea/otg.c 2016-03-31 21:39:23.571126980 +0300
+++ linux-4.4.4/drivers/usb/chipidea/otg.c 2016-03-31 21:39:23.567126980 +0300
@@ -95,8 +95,10 @@
void ci_handle_vbus_change(struct ci_hdrc *ci)
{
- if (!ci->is_otg)
+ if (ci->dp_always_pullup) {
+ usb_gadget_vbus_connect(&ci->gadget);
return;
+ }
if (hw_read_otgsc(ci, OTGSC_BSV))
usb_gadget_vbus_connect(&ci->gadget);
Index: linux-4.4.4/include/linux/usb/chipidea.h
===================================================================
--- linux-4.4.4.orig/include/linux/usb/chipidea.h 2016-03-31 21:39:23.571126980 +0300
+++ linux-4.4.4/include/linux/usb/chipidea.h 2016-03-31 21:39:23.567126980 +0300
@@ -55,6 +55,7 @@
#define CI_HDRC_OVERRIDE_AHB_BURST BIT(9)
#define CI_HDRC_OVERRIDE_TX_BURST BIT(10)
#define CI_HDRC_OVERRIDE_RX_BURST BIT(11)
+#define CI_HDRC_DP_ALWAYS_PULLUP BIT(12)
enum usb_dr_mode dr_mode;
#define CI_HDRC_CONTROLLER_RESET_EVENT 0
#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1