KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/kirkwood/image/Makefile

114 lines
2.8 KiB
Makefile
Raw Normal View History

add preliminary Marvell Kirkwood support SVN-Revision: 15556
2009-05-02 12:48:42 +00:00
#
kirkwood: fix initramfs images Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38296
2013-10-03 02:50:02 +00:00
# Copyright (C) 2009-2013 OpenWrt.org
add preliminary Marvell Kirkwood support SVN-Revision: 15556
2009-05-02 12:48:42 +00:00
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
image: fix jffs2(_nand) image generation Variables dependend on JFFS2_BLOCKSIZE and NANDBLOCK_SIZE are used for template generation, so need to be present before inclusion of image.mk in target image Makefiles. So move all declarations to before any includes. Fixes: r42878 ("image.mk: clean up and parallelize mkfs calls") Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46564
2015-08-05 13:55:52 +00:00
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
KERNEL_LOADADDR:=0x8000
define Device/Default
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
PROFILES := Default
targets: add kernel image dependencies on device tree files Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48146
2016-01-06 18:39:06 +00:00
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
KERNEL := kernel-bin | append-dtb | uImage none
KERNEL_NAME := zImage
kirkwood: install kernel binaries into bin/ for use with external storage Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-23 12:38:20 +00:00
KERNEL_SUFFIX := -uImage
kirkwood: cleanup image build code Drop NAND_BLOCKSIZE, UBI_OPTS and UBIFS_OPTS. They are either used by not supported filesystems or by the legacy image build code. Add common used options/images to the default build code and override the options where necessary. Don't export the kernel image, it isn't required by any board. While at it, change the file extension for the sysupgrade images to bin. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-27 23:25:41 +00:00
KERNEL_IN_UBI := 1
kirkwood: add DEVICE_VAR KERNEL_IN_UBI for kernel as volume in ubi images depending on KERNEL_IN_UBI, the image.mk will create a ubi volume for the kernel Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49009
2016-03-14 17:06:08 +00:00
PAGESIZE := 2048
SUBPAGESIZE := 512
image: use k as unit suffix for blocksize Use k as unit suffix for kilobyte to have a the same unit regardless of the used filesystem. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-04 06:56:05 +00:00
BLOCKSIZE := 128k
kirkwood: cleanup image build code Drop NAND_BLOCKSIZE, UBI_OPTS and UBIFS_OPTS. They are either used by not supported filesystems or by the legacy image build code. Add common used options/images to the default build code and override the options where necessary. Don't export the kernel image, it isn't required by any board. While at it, change the file extension for the sysupgrade images to bin. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-27 23:25:41 +00:00
IMAGES := sysupgrade.bin factory.bin
kirkwood: use image metadata Append and enforce image metadata. Remove the device specific image checks, they are replaced by image metadata. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 08:22:45 +00:00
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
kirkwood: cleanup image build code Drop NAND_BLOCKSIZE, UBI_OPTS and UBIFS_OPTS. They are either used by not supported filesystems or by the legacy image build code. Add common used options/images to the default build code and override the options where necessary. Don't export the kernel image, it isn't required by any board. While at it, change the file extension for the sysupgrade images to bin. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-27 23:25:41 +00:00
IMAGE/factory.bin := append-ubi
kirkwood: use image metadata Append and enforce image metadata. Remove the device specific image checks, they are replaced by image metadata. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 08:22:45 +00:00
SUPPORTED_DEVICES := $(1)
kirkwood: clean up redundant variables in the image building code Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-19 14:38:25 +00:00
endef
define Device/dockstar
DEVICE_DTS := kirkwood-dockstar
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
DEVICE_TITLE := Seagate FreeAgent Dockstar
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
endef
treewide: add only one device when appending to TARGET_DEVICES This will avoid some conflicts when doing a git rebase or merge, specially when adding support to a new device. Signed-off-by: Luis Araneda <luaraneda@gmail.com> [drop brcm47xx changes which rename the images] Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-10 22:45:20 +00:00
TARGET_DEVICES += dockstar
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
linux/kirkwood: migrate goflexhome/goflexnet to new ubi style Also using the new image build step format Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49013
2016-03-14 17:06:12 +00:00
define Device/goflexnet
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
DEVICE_TITLE := Seagate GoFlexNet
linux/kirkwood: migrate goflexhome/goflexnet to new ubi style Also using the new image build step format Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49013
2016-03-14 17:06:12 +00:00
DEVICE_DTS := kirkwood-goflexnet
endef
treewide: add only one device when appending to TARGET_DEVICES This will avoid some conflicts when doing a git rebase or merge, specially when adding support to a new device. Signed-off-by: Luis Araneda <luaraneda@gmail.com> [drop brcm47xx changes which rename the images] Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-10 22:45:20 +00:00
TARGET_DEVICES += goflexnet
linux/kirkwood: migrate goflexhome/goflexnet to new ubi style Also using the new image build step format Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49013
2016-03-14 17:06:12 +00:00
define Device/goflexhome
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
DEVICE_TITLE := Seagate GoFlexHome
linux/kirkwood: migrate goflexhome/goflexnet to new ubi style Also using the new image build step format Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49013
2016-03-14 17:06:12 +00:00
DEVICE_DTS := kirkwood-goflexhome
endef
treewide: add only one device when appending to TARGET_DEVICES This will avoid some conflicts when doing a git rebase or merge, specially when adding support to a new device. Signed-off-by: Luis Araneda <luaraneda@gmail.com> [drop brcm47xx changes which rename the images] Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-10 22:45:20 +00:00
TARGET_DEVICES += goflexhome
linux/kirkwood: migrate goflexhome/goflexnet to new ubi style Also using the new image build step format Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49013
2016-03-14 17:06:12 +00:00
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
define Device/linksys-audi
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
DEVICE_TITLE := Linksys EA3500 (Audi)
DEVICE_PACKAGES := kmod-mwl8k swconfig wpad-mini
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
DEVICE_DTS := kirkwood-linksys-audi
KERNEL_SIZE := 2624k
kirkwood: cleanup image build code Drop NAND_BLOCKSIZE, UBI_OPTS and UBIFS_OPTS. They are either used by not supported filesystems or by the legacy image build code. Add common used options/images to the default build code and override the options where necessary. Don't export the kernel image, it isn't required by any board. While at it, change the file extension for the sysupgrade images to bin. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-27 23:25:41 +00:00
KERNEL_IN_UBI := 0
kirkwood: only add UBI EOF markers for devices that need it Fixes issues where the second-stage u-boot already uses UBI. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:03:46 +00:00
UBINIZE_OPTS := -E 5
image: remove padding parameter from append-kernel/append-rootfs Using pad-to instead of passing the optional padding to append-kernel or append-rootfs. It could be that the value of a variable is passed. In case the variable is empty no error is thrown. Furthermore the purpose of the extra parameter is hard to get without reading the code. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-11 17:05:20 +00:00
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
endef
treewide: add only one device when appending to TARGET_DEVICES This will avoid some conflicts when doing a git rebase or merge, specially when adding support to a new device. Signed-off-by: Luis Araneda <luaraneda@gmail.com> [drop brcm47xx changes which rename the images] Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-10 22:45:20 +00:00
TARGET_DEVICES += linksys-audi
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
define Device/linksys-viper
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
DEVICE_TITLE := Linksys E4200v2 / EA4500 (Viper)
DEVICE_PACKAGES := kmod-mwl8k swconfig wpad-mini
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
DEVICE_DTS := kirkwood-linksys-viper
KERNEL_SIZE := 2688k
kirkwood: cleanup image build code Drop NAND_BLOCKSIZE, UBI_OPTS and UBIFS_OPTS. They are either used by not supported filesystems or by the legacy image build code. Add common used options/images to the default build code and override the options where necessary. Don't export the kernel image, it isn't required by any board. While at it, change the file extension for the sysupgrade images to bin. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-27 23:25:41 +00:00
KERNEL_IN_UBI := 0
kirkwood: only add UBI EOF markers for devices that need it Fixes issues where the second-stage u-boot already uses UBI. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:03:46 +00:00
UBINIZE_OPTS := -E 5
image: remove padding parameter from append-kernel/append-rootfs Using pad-to instead of passing the optional padding to append-kernel or append-rootfs. It could be that the value of a variable is passed. In case the variable is empty no error is thrown. Furthermore the purpose of the extra parameter is hard to get without reading the code. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-11 17:05:20 +00:00
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
endef
treewide: add only one device when appending to TARGET_DEVICES This will avoid some conflicts when doing a git rebase or merge, specially when adding support to a new device. Signed-off-by: Luis Araneda <luaraneda@gmail.com> [drop brcm47xx changes which rename the images] Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-10 22:45:20 +00:00
TARGET_DEVICES += linksys-viper
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 14:07:38 +00:00
define Device/iconnect
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
DEVICE_TITLE := Iomega Iconnect
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 14:07:38 +00:00
DEVICE_DTS := kirkwood-iconnect
endef
treewide: add only one device when appending to TARGET_DEVICES This will avoid some conflicts when doing a git rebase or merge, specially when adding support to a new device. Signed-off-by: Luis Araneda <luaraneda@gmail.com> [drop brcm47xx changes which rename the images] Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-10 22:45:20 +00:00
TARGET_DEVICES += iconnect
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 14:07:38 +00:00
kirkwood: add ZyXEL NSA310b The ZyXEL NSA310 device is a Kirkwood based NAS: - SoC: Marvell 88F6702 1200Mhz - SDRAM memory: 256MB DDR2 400Mhz - Gigabit ethernet: Realtek (over pcie) - Flash memory: 128MB - 1 Power button - 1 Power LED (blue) - 5 Status LED (green/red) - 1 Copy/Sync button - 1 Reset button - 2 SATA II port (1 internal and 1 external) - 2 USB 2.0 ports (1 front and 1 back) - Smart fan The stock u-boot cannot read ubi so it should be replaced with the LEDE/OpenWRT's u-boot or with a u-boot from here https://github.com/mibodhi/u-boot-kirkwood This device's boot ROM supports "kwboot" tool (in mainline u-boot, built automatically if CONFIG_KIRKWOOD is declared) that sends an uboot image to the board over serial connection, it is very easy to unbrick. The stock bootloader can use usb and read from FAT filesystems, so the installation process is simple, place the uboot file on a USB flashdrive formatted as FAT (here it is "openwrt-kirkwood-nsa310.bin", then connect TTL to the board and write the following commands in the bootloader console: usb reset fatload usb 0 0x1000000 openwrt-kirkwood-nsa310.bin nand write 0x1000000 0x00000 0x100000 reset Now you are rebooting in the new u-boot, write this in its console to install the firmware: usb reset fatload usb 0 0x2000000 lede-kirkwood-nsa310b-squashfs-factory.bin nand erase.part ubi nand write 0x2000000 ubi 0x600000 If your firmware file is bigger than 6 MiBs you should write its size in hex instead of 0x600000 above, or remove that number entirely (it will take a while in this case). If you are using another uboot that can read ubi, set mtdparts like this mtdparts=mtdparts=orion_nand:0x00c0000(uboot),0x80000(uboot_env),0x7ec0000(ubi) And set your bootcmd to be like this bootcmd=run setenv bootargs; ubi part ubi; ubi read 0x800000 kernel; bootm 0x800000 Then you can install the firmware as described above. After you installed (or configured) the u-boot for booting the firmware, write the device's mac address in the ethaddr u-boot env. The MAC address is usually on a sticker under the device (one of the two codes is the serial), it should begin with "107BEF" as it is assigned to ZyXEL. write in the u-boot console (use your MAC address instead of the example) setenv ethaddr 10:7B:EF:00:00:00 saveenv to save the mac address in the u-boot. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-01-23 19:34:29 +00:00
define Device/nsa310b
DEVICE_TITLE := ZyXEL NSA310b
DEVICE_DTS := kirkwood-nsa310b
DEVICE_PACKAGES := kmod-r8169 kmod-gpio-button-hotplug kmod-hwmon-lm85
endef
treewide: add only one device when appending to TARGET_DEVICES This will avoid some conflicts when doing a git rebase or merge, specially when adding support to a new device. Signed-off-by: Luis Araneda <luaraneda@gmail.com> [drop brcm47xx changes which rename the images] Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-10 22:45:20 +00:00
TARGET_DEVICES += nsa310b
kirkwood: add ZyXEL NSA310b The ZyXEL NSA310 device is a Kirkwood based NAS: - SoC: Marvell 88F6702 1200Mhz - SDRAM memory: 256MB DDR2 400Mhz - Gigabit ethernet: Realtek (over pcie) - Flash memory: 128MB - 1 Power button - 1 Power LED (blue) - 5 Status LED (green/red) - 1 Copy/Sync button - 1 Reset button - 2 SATA II port (1 internal and 1 external) - 2 USB 2.0 ports (1 front and 1 back) - Smart fan The stock u-boot cannot read ubi so it should be replaced with the LEDE/OpenWRT's u-boot or with a u-boot from here https://github.com/mibodhi/u-boot-kirkwood This device's boot ROM supports "kwboot" tool (in mainline u-boot, built automatically if CONFIG_KIRKWOOD is declared) that sends an uboot image to the board over serial connection, it is very easy to unbrick. The stock bootloader can use usb and read from FAT filesystems, so the installation process is simple, place the uboot file on a USB flashdrive formatted as FAT (here it is "openwrt-kirkwood-nsa310.bin", then connect TTL to the board and write the following commands in the bootloader console: usb reset fatload usb 0 0x1000000 openwrt-kirkwood-nsa310.bin nand write 0x1000000 0x00000 0x100000 reset Now you are rebooting in the new u-boot, write this in its console to install the firmware: usb reset fatload usb 0 0x2000000 lede-kirkwood-nsa310b-squashfs-factory.bin nand erase.part ubi nand write 0x2000000 ubi 0x600000 If your firmware file is bigger than 6 MiBs you should write its size in hex instead of 0x600000 above, or remove that number entirely (it will take a while in this case). If you are using another uboot that can read ubi, set mtdparts like this mtdparts=mtdparts=orion_nand:0x00c0000(uboot),0x80000(uboot_env),0x7ec0000(ubi) And set your bootcmd to be like this bootcmd=run setenv bootargs; ubi part ubi; ubi read 0x800000 kernel; bootm 0x800000 Then you can install the firmware as described above. After you installed (or configured) the u-boot for booting the firmware, write the device's mac address in the ethaddr u-boot env. The MAC address is usually on a sticker under the device (one of the two codes is the serial), it should begin with "107BEF" as it is assigned to ZyXEL. write in the u-boot console (use your MAC address instead of the example) setenv ethaddr 10:7B:EF:00:00:00 saveenv to save the mac address in the u-boot. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-01-23 19:34:29 +00:00
kirkwood: add ZyXEL NSA325 device This patch add ZyXEL NSA325 2-Bay Media Server The ZyXEL NSA325 device is a Kirkwood based NAS: - SoC: Marvell 88F6702 1600Mhz - SDRAM memory: 512MB DDR2 400Mhz - Gigabit ethernet: Marvell Alaska - Flash memory: 128MB - 1 Power button - 1 Power LED (blue) - 5 Status LED (green/red) - 1 Copy/Sync button - 1 Reset button - 2 SATA II ports (internal) - 2 USB 2.0 ports (back) - 1 USB 3.0 port (front) - Fan (fixed speed) - hardware watchdog in a mcu Basically a bigger, more powerful version of NSA310, installation is the same as they share the same flash layout. A notable difference is that there is a hardware watchdog in a mcu on the board, which is disabled by default in the LEDE u-boot. The watchdog is also disabled with a GPIO activation through raw register change when kwbooting or it would reset the board before the new uboot was transferred. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it> Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove dead code]
2017-02-06 10:40:52 +00:00
define Device/nsa325
DEVICE_TITLE := ZyXEL NSA325 (v1 and v2)
DEVICE_DTS := kirkwood-nsa325
DEVICE_PACKAGES := kmod-gpio-button-hotplug kmod-rtc-pcf8563 kmod-usb3
endef
treewide: add only one device when appending to TARGET_DEVICES This will avoid some conflicts when doing a git rebase or merge, specially when adding support to a new device. Signed-off-by: Luis Araneda <luaraneda@gmail.com> [drop brcm47xx changes which rename the images] Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-10 22:45:20 +00:00
TARGET_DEVICES += nsa325
kirkwood: add ZyXEL NSA325 device This patch add ZyXEL NSA325 2-Bay Media Server The ZyXEL NSA325 device is a Kirkwood based NAS: - SoC: Marvell 88F6702 1600Mhz - SDRAM memory: 512MB DDR2 400Mhz - Gigabit ethernet: Marvell Alaska - Flash memory: 128MB - 1 Power button - 1 Power LED (blue) - 5 Status LED (green/red) - 1 Copy/Sync button - 1 Reset button - 2 SATA II ports (internal) - 2 USB 2.0 ports (back) - 1 USB 3.0 port (front) - Fan (fixed speed) - hardware watchdog in a mcu Basically a bigger, more powerful version of NSA310, installation is the same as they share the same flash layout. A notable difference is that there is a hardware watchdog in a mcu on the board, which is disabled by default in the LEDE u-boot. The watchdog is also disabled with a GPIO activation through raw register change when kwbooting or it would reset the board before the new uboot was transferred. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it> Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove dead code]
2017-02-06 10:40:52 +00:00
kirkwood: add support for Cisco ON100 The Cisco ON100 device is a Kirkwood based router: SoC: Marvell 88F6282 1600Mhz SDRAM memory: 512MB DDR3 1333Mhz Gigabit ethernet: 2x Marvell 88E1310 (over RGMII) Flash memory: 512MB 2 bi-colour status LEDs (green/red) 1 Reset button 1 USB 2.0 port (on back) 1 SDIO slot (on back) This commit adds a target profile of "Cisco Systems ON100" under the target system "Marvell Kirkwood". Flashing can be performed over tftp, once "dhcp" has been issued: tftpboot ${loadaddr} lede-kirkwood-on100-squashfs-factory.bin nand erase 0x0c0000 ${filesize} nand write ${loadaddr} 0x0c0000 ${filesize} Once flashed, set environment variables to boot: setenv bootcmd nand read \${loadaddr} 0x0c0000 0x540000\; setenv bootargs \; bootm saveenv Signed-off-by: Makoto Takeuchi <mak0@lxsys.co.uk>
2017-05-24 15:37:24 +00:00
define Device/on100
DEVICE_TITLE := Cisco Systems ON100
DEVICE_DTS := kirkwood-on100
DEVICE_PACKAGES := kmod-i2c-mv64xxx
KERNEL_SIZE := 5376k
kirkwood: cleanup image build code Drop NAND_BLOCKSIZE, UBI_OPTS and UBIFS_OPTS. They are either used by not supported filesystems or by the legacy image build code. Add common used options/images to the default build code and override the options where necessary. Don't export the kernel image, it isn't required by any board. While at it, change the file extension for the sysupgrade images to bin. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-27 23:25:41 +00:00
KERNEL_IN_UBI := 0
kirkwood: add support for Cisco ON100 The Cisco ON100 device is a Kirkwood based router: SoC: Marvell 88F6282 1600Mhz SDRAM memory: 512MB DDR3 1333Mhz Gigabit ethernet: 2x Marvell 88E1310 (over RGMII) Flash memory: 512MB 2 bi-colour status LEDs (green/red) 1 Reset button 1 USB 2.0 port (on back) 1 SDIO slot (on back) This commit adds a target profile of "Cisco Systems ON100" under the target system "Marvell Kirkwood". Flashing can be performed over tftp, once "dhcp" has been issued: tftpboot ${loadaddr} lede-kirkwood-on100-squashfs-factory.bin nand erase 0x0c0000 ${filesize} nand write ${loadaddr} 0x0c0000 ${filesize} Once flashed, set environment variables to boot: setenv bootcmd nand read \${loadaddr} 0x0c0000 0x540000\; setenv bootargs \; bootm saveenv Signed-off-by: Makoto Takeuchi <mak0@lxsys.co.uk>
2017-05-24 15:37:24 +00:00
UBINIZE_OPTS := -E 5
kirkwood: cleanup image build code Drop NAND_BLOCKSIZE, UBI_OPTS and UBIFS_OPTS. They are either used by not supported filesystems or by the legacy image build code. Add common used options/images to the default build code and override the options where necessary. Don't export the kernel image, it isn't required by any board. While at it, change the file extension for the sysupgrade images to bin. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-27 23:25:41 +00:00
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
kirkwood: add support for Cisco ON100 The Cisco ON100 device is a Kirkwood based router: SoC: Marvell 88F6282 1600Mhz SDRAM memory: 512MB DDR3 1333Mhz Gigabit ethernet: 2x Marvell 88E1310 (over RGMII) Flash memory: 512MB 2 bi-colour status LEDs (green/red) 1 Reset button 1 USB 2.0 port (on back) 1 SDIO slot (on back) This commit adds a target profile of "Cisco Systems ON100" under the target system "Marvell Kirkwood". Flashing can be performed over tftp, once "dhcp" has been issued: tftpboot ${loadaddr} lede-kirkwood-on100-squashfs-factory.bin nand erase 0x0c0000 ${filesize} nand write ${loadaddr} 0x0c0000 ${filesize} Once flashed, set environment variables to boot: setenv bootcmd nand read \${loadaddr} 0x0c0000 0x540000\; setenv bootargs \; bootm saveenv Signed-off-by: Makoto Takeuchi <mak0@lxsys.co.uk>
2017-05-24 15:37:24 +00:00
endef
treewide: add only one device when appending to TARGET_DEVICES This will avoid some conflicts when doing a git rebase or merge, specially when adding support to a new device. Signed-off-by: Luis Araneda <luaraneda@gmail.com> [drop brcm47xx changes which rename the images] Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-10 22:45:20 +00:00
TARGET_DEVICES += on100
kirkwood: add support for Cisco ON100 The Cisco ON100 device is a Kirkwood based router: SoC: Marvell 88F6282 1600Mhz SDRAM memory: 512MB DDR3 1333Mhz Gigabit ethernet: 2x Marvell 88E1310 (over RGMII) Flash memory: 512MB 2 bi-colour status LEDs (green/red) 1 Reset button 1 USB 2.0 port (on back) 1 SDIO slot (on back) This commit adds a target profile of "Cisco Systems ON100" under the target system "Marvell Kirkwood". Flashing can be performed over tftp, once "dhcp" has been issued: tftpboot ${loadaddr} lede-kirkwood-on100-squashfs-factory.bin nand erase 0x0c0000 ${filesize} nand write ${loadaddr} 0x0c0000 ${filesize} Once flashed, set environment variables to boot: setenv bootcmd nand read \${loadaddr} 0x0c0000 0x540000\; setenv bootargs \; bootm saveenv Signed-off-by: Makoto Takeuchi <mak0@lxsys.co.uk>
2017-05-24 15:37:24 +00:00
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 14:07:38 +00:00
define Device/pogo_e02
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
DEVICE_TITLE := Cloud Engines Pogoplug E02
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 14:07:38 +00:00
DEVICE_DTS := kirkwood-pogo_e02
endef
treewide: add only one device when appending to TARGET_DEVICES This will avoid some conflicts when doing a git rebase or merge, specially when adding support to a new device. Signed-off-by: Luis Araneda <luaraneda@gmail.com> [drop brcm47xx changes which rename the images] Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-10 22:45:20 +00:00
TARGET_DEVICES += pogo_e02
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 14:07:38 +00:00
define Device/ib62x0
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
DEVICE_TITLE := RaidSonic ICY BOX IB-NAS62x0
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 14:07:38 +00:00
DEVICE_DTS := kirkwood-ib62x0
endef
treewide: add only one device when appending to TARGET_DEVICES This will avoid some conflicts when doing a git rebase or merge, specially when adding support to a new device. Signed-off-by: Luis Araneda <luaraneda@gmail.com> [drop brcm47xx changes which rename the images] Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-10 22:45:20 +00:00
TARGET_DEVICES += ib62x0
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 14:07:38 +00:00
add preliminary Marvell Kirkwood support SVN-Revision: 15556
2009-05-02 12:48:42 +00:00
$(eval $(call BuildImage))
Reference in a new issue Copy permalink