KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/arc770/image/Makefile

87 lines
2.6 KiB
Makefile
Raw Normal View History

linux: add support of Synopsys ARC770-based boards This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
#
arc770: Reduce generalization As support of ARC 770 in OpenWRT/Lede matures we don't need debug-only output binaries any longer, so purging vmlinux for AXS10x boards. As for uImage for nSIM it makes completely no sense because there's no way to run U-Boot on nSIM. So we remove add_arcYYY_XXX scripts making code more compact and cleaner. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-08-24 14:48:09 +00:00
# Copyright (C) 2016 OpenWrt.org
linux: add support of Synopsys ARC770-based boards This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
arc: Build uImage as well as vmlinux output files Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-05-31 17:12:21 +00:00
# On ARC initramfs is put before entry point and so entry point moves
# in memory from build to built. Thus we need to extract EP from vmlinux
arc770: Reduce generalization As support of ARC 770 in OpenWRT/Lede matures we don't need debug-only output binaries any longer, so purging vmlinux for AXS10x boards. As for uImage for nSIM it makes completely no sense because there's no way to run U-Boot on nSIM. So we remove add_arcYYY_XXX scripts making code more compact and cleaner. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-08-24 14:48:09 +00:00
# every time before generation of uImage.
arc: Build uImage as well as vmlinux output files Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-05-31 17:12:21 +00:00
define Build/calculate-ep
arc770: Introduce images for SD-cards Historically on ARC we started from initramfs-based images because: a) It was much easier to debug especially when toolchain and other components were changing quite dynamically b) It was our usual approach for embedded Linux But now with ARC port of Lede/OpenWRT getting more stable and mature we're ready for more real-life scenarios with FS permanently stored on SD-card. This essentially benefits from ability to setup devices that survive reboots with all settings and extra packages kept in place. Still we keep an ability to build images with initramfs. This allows us to use storage-less simulators for testing still. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: John Crispin <john@phrozen.org> Cc: Jo-Philipp Wich <jo@mein.io>
2016-08-24 14:48:12 +00:00
$(eval KERNEL_ENTRY=$(shell $(KERNEL_CROSS)readelf -h $(1) | grep "Entry point address" | grep -o 0x.*))
arc: Build uImage as well as vmlinux output files Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-05-31 17:12:21 +00:00
endef
arc770: Introduce images for SD-cards Historically on ARC we started from initramfs-based images because: a) It was much easier to debug especially when toolchain and other components were changing quite dynamically b) It was our usual approach for embedded Linux But now with ARC port of Lede/OpenWRT getting more stable and mature we're ready for more real-life scenarios with FS permanently stored on SD-card. This essentially benefits from ability to setup devices that survive reboots with all settings and extra packages kept in place. Still we keep an ability to build images with initramfs. This allows us to use storage-less simulators for testing still. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: John Crispin <john@phrozen.org> Cc: Jo-Philipp Wich <jo@mein.io>
2016-08-24 14:48:12 +00:00
define Build/build-dtb
$(call Image/BuildDTB,$(DTS_DIR)/$(DEVICE_DTS).dts,$(DTS_DIR)/$(DEVICE_DTS).dtb)
linux: add support of Synopsys ARC770-based boards This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
endef
arc770: Introduce images for SD-cards Historically on ARC we started from initramfs-based images because: a) It was much easier to debug especially when toolchain and other components were changing quite dynamically b) It was our usual approach for embedded Linux But now with ARC port of Lede/OpenWRT getting more stable and mature we're ready for more real-life scenarios with FS permanently stored on SD-card. This essentially benefits from ability to setup devices that survive reboots with all settings and extra packages kept in place. Still we keep an ability to build images with initramfs. This allows us to use storage-less simulators for testing still. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: John Crispin <john@phrozen.org> Cc: Jo-Philipp Wich <jo@mein.io>
2016-08-24 14:48:12 +00:00
define Build/patch-dtb
$(STAGING_DIR_HOST)/bin/patch-dtb $@ $(DTS_DIR)/$(DEVICE_DTS).dtb
linux: add support of Synopsys ARC770-based boards This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
endef
arc770: Introduce images for SD-cards Historically on ARC we started from initramfs-based images because: a) It was much easier to debug especially when toolchain and other components were changing quite dynamically b) It was our usual approach for embedded Linux But now with ARC port of Lede/OpenWRT getting more stable and mature we're ready for more real-life scenarios with FS permanently stored on SD-card. This essentially benefits from ability to setup devices that survive reboots with all settings and extra packages kept in place. Still we keep an ability to build images with initramfs. This allows us to use storage-less simulators for testing still. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: John Crispin <john@phrozen.org> Cc: Jo-Philipp Wich <jo@mein.io>
2016-08-24 14:48:12 +00:00
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
# Root FS built-in
arc: Build uImage as well as vmlinux output files Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-05-31 17:12:21 +00:00
define Device/vmlinux
arc770: Introduce images for SD-cards Historically on ARC we started from initramfs-based images because: a) It was much easier to debug especially when toolchain and other components were changing quite dynamically b) It was our usual approach for embedded Linux But now with ARC port of Lede/OpenWRT getting more stable and mature we're ready for more real-life scenarios with FS permanently stored on SD-card. This essentially benefits from ability to setup devices that survive reboots with all settings and extra packages kept in place. Still we keep an ability to build images with initramfs. This allows us to use storage-less simulators for testing still. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: John Crispin <john@phrozen.org> Cc: Jo-Philipp Wich <jo@mein.io>
2016-08-24 14:48:12 +00:00
KERNEL_SUFFIX := .elf
KERNEL := kernel-bin | build-dtb | patch-dtb
KERNEL_INITRAMFS_NAME = vmlinux-initramfs.elf
arc: Build uImage as well as vmlinux output files Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-05-31 17:12:21 +00:00
endef
arc770: Reduce generalization As support of ARC 770 in OpenWRT/Lede matures we don't need debug-only output binaries any longer, so purging vmlinux for AXS10x boards. As for uImage for nSIM it makes completely no sense because there's no way to run U-Boot on nSIM. So we remove add_arcYYY_XXX scripts making code more compact and cleaner. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-08-24 14:48:09 +00:00
define Device/nsim
$(call Device/vmlinux)
DEVICE_PROFILE := nsim
DEVICE_DTS := nsim_700
linux: add support of Synopsys ARC770-based boards This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
endef
arc770: Reduce generalization As support of ARC 770 in OpenWRT/Lede matures we don't need debug-only output binaries any longer, so purging vmlinux for AXS10x boards. As for uImage for nSIM it makes completely no sense because there's no way to run U-Boot on nSIM. So we remove add_arcYYY_XXX scripts making code more compact and cleaner. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-08-24 14:48:09 +00:00
TARGET_DEVICES += nsim
arc770: Introduce images for SD-cards Historically on ARC we started from initramfs-based images because: a) It was much easier to debug especially when toolchain and other components were changing quite dynamically b) It was our usual approach for embedded Linux But now with ARC port of Lede/OpenWRT getting more stable and mature we're ready for more real-life scenarios with FS permanently stored on SD-card. This essentially benefits from ability to setup devices that survive reboots with all settings and extra packages kept in place. Still we keep an ability to build images with initramfs. This allows us to use storage-less simulators for testing still. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: John Crispin <john@phrozen.org> Cc: Jo-Philipp Wich <jo@mein.io>
2016-08-24 14:48:12 +00:00
endif
# Root FS on SD-card
KERNEL_LOADADDR := 0x80000000
DEVICE_DTS_LIST:= axs101
FAT32_BLOCK_SIZE=1024
FAT32_BLOCKS=$(shell echo $$(($(CONFIG_AXS10X_SD_BOOT_PARTSIZE)*1024*1024/$(FAT32_BLOCK_SIZE))))
define Image/Build/SDCard
rm -f $(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img
mkdosfs $(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img -C $(FAT32_BLOCKS)
mkimage -C none -A arc -T script -d uEnv.txt $(BIN_DIR)/uEnv.scr
mcopy -i $(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img $(BIN_DIR)/uEnv.scr ::boot.scr
mcopy -i $(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img $(DTS_DIR)/*.dtb ::
mcopy -i $(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img $(BIN_DIR)/$(IMG_PREFIX)-uImage ::uImage
./gen_axs10x_sdcard_img.sh \
$(BIN_DIR)/$(IMG_PREFIX)-$(PROFILE)-sdcard-vfat-$(1).img \
$(KDIR_TMP)/$(IMG_PREFIX)-$(PROFILE)-boot.img \
$(KDIR)/root.$(1) \
$(CONFIG_AXS10X_SD_BOOT_PARTSIZE) \
$(CONFIG_TARGET_ROOTFS_PARTSIZE)
ifneq ($(CONFIG_TARGET_IMAGES_GZIP),)
gzip -f9n $(BIN_DIR)/$(IMG_PREFIX)-$(PROFILE)-sdcard-vfat-$(1).img
endif
endef
define Image/BuildKernel
# Build unified uImage
$(call Build/calculate-ep, $(KDIR)/vmlinux.elf)
$(call Image/BuildKernel/MkuImage, \
none, $(KERNEL_LOADADDR), $(KERNEL_ENTRY), \
$(KDIR)/vmlinux, \
$(BIN_DIR)/$(IMG_PREFIX)-uImage \
)
# Build .dtb for all boards we may run on
$(foreach DEVICE_DTS,$(shell echo $(DEVICE_DTS_LIST)), $(call Build/build-dtb))
endef
define Image/Build
$(call Image/Build/$(1),$(1))
$(call Image/Build/SDCard,$(1))
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
endef
linux: add support of Synopsys ARC770-based boards This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
$(eval $(call BuildImage))
Reference in a new issue Copy permalink