openwrtv3/target/linux/brcm2708/patches-4.4/0380-media-rc-gpio-ir-recv-add-timeout-on-idle.patch

From 87909c64d14dc0f907ebe95f77874075a75e7f66 Mon Sep 17 00:00:00 2001
From: Eric Nelson <eric@nelint.com>
Date: Wed, 23 Sep 2015 11:07:08 -0300
Subject: [PATCH 380/423] [media] rc: gpio-ir-recv: add timeout on idle

Many decoders require a trailing space (period without IR illumination)
to be delivered before completing a decode.

Since the gpio-ir-recv driver only delivers events on gpio transitions,
a single IR symbol (caused by a quick touch on an IR remote) will not
be properly decoded without the use of a timer to flush the tail end
state of the IR receiver.

This patch initializes and uses a timer and the timeout field of rcdev
to complete the stream and allow decode.

The timeout can be overridden through the use of the LIRC_SET_REC_TIMEOUT
ioctl.

Signed-off-by: Eric Nelson <eric@nelint.com>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
---
 drivers/media/rc/gpio-ir-recv.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

--- a/drivers/media/rc/gpio-ir-recv.c
+++ b/drivers/media/rc/gpio-ir-recv.c
@@ -30,6 +30,7 @@ struct gpio_rc_dev {
 	struct rc_dev *rcdev;
 	int gpio_nr;
 	bool active_low;
+	struct timer_list flush_timer;
 };
 
 #ifdef CONFIG_OF
@@ -93,12 +94,26 @@ static irqreturn_t gpio_ir_recv_irq(int
 	if (rc < 0)
 		goto err_get_value;
 
+	mod_timer(&gpio_dev->flush_timer,
+		  jiffies + nsecs_to_jiffies(gpio_dev->rcdev->timeout));
+
 	ir_raw_event_handle(gpio_dev->rcdev);
 
 err_get_value:
 	return IRQ_HANDLED;
 }
 
+static void flush_timer(unsigned long arg)
+{
+	struct gpio_rc_dev *gpio_dev = (struct gpio_rc_dev *)arg;
+	DEFINE_IR_RAW_EVENT(ev);
+
+	ev.timeout = true;
+	ev.duration = gpio_dev->rcdev->timeout;
+	ir_raw_event_store(gpio_dev->rcdev, &ev);
+	ir_raw_event_handle(gpio_dev->rcdev);
+}
+
 static int gpio_ir_recv_probe(struct platform_device *pdev)
 {
 	struct gpio_rc_dev *gpio_dev;
@@ -144,6 +159,9 @@ static int gpio_ir_recv_probe(struct pla
 	rcdev->input_id.version = 0x0100;
 	rcdev->dev.parent = &pdev->dev;
 	rcdev->driver_name = GPIO_IR_DRIVER_NAME;
+	rcdev->min_timeout = 0;
+	rcdev->timeout = IR_DEFAULT_TIMEOUT;
+	rcdev->max_timeout = 10 * IR_DEFAULT_TIMEOUT;
 	if (pdata->allowed_protos)
 		rcdev->allowed_protocols = pdata->allowed_protos;
 	else
@@ -154,6 +172,9 @@ static int gpio_ir_recv_probe(struct pla
 	gpio_dev->gpio_nr = pdata->gpio_nr;
 	gpio_dev->active_low = pdata->active_low;
 
+	setup_timer(&gpio_dev->flush_timer, flush_timer,
+		    (unsigned long)gpio_dev);
+
 	rc = gpio_request(pdata->gpio_nr, "gpio-ir-recv");
 	if (rc < 0)
 		goto err_gpio_request;
@@ -196,6 +217,7 @@ static int gpio_ir_recv_remove(struct pl
 	struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
 
 	free_irq(gpio_to_irq(gpio_dev->gpio_nr), gpio_dev);
+	del_timer_sync(&gpio_dev->flush_timer);
 	rc_unregister_device(gpio_dev->rcdev);
 	gpio_free(gpio_dev->gpio_nr);
 	kfree(gpio_dev);