KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/layerscape/patches-4.4/3132-dts-ls1046a-add-LS1046ARDB-board-support.patch

558 lines
14 KiB
Diff
Raw Normal View History

layerscape: add 64b/32b target for ls1046ardb device Add support for NXP layerscape ls1046ardb 64b/32b Dev board. LS1046ARDB Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 512 Mbyte NAND flash * Two 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card * On-board 4G eMMC Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: * PCIe1 (SerDes2 Lane0) to miniPCIe slot * PCIe2 (SerDes2 Lane1) to x2 PCIe slot * PCIe3 (SerDes2 Lane2) to x4 PCIe slot * USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port * UART: supports two UARTs up to 115200 bps for console Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-12-07 16:07:42 +00:00
From feb12cb699adbac2d4619401c7ff4fcc2fc97b6c Mon Sep 17 00:00:00 2001
From: Mingkai Hu <mingkai.hu@nxp.com>
Date: Mon, 26 Sep 2016 12:33:42 +0800
Subject: [PATCH 132/141] dts/ls1046a: add LS1046ARDB board support
commit e95a28cfd9a392fe5dc189a9ae097bbaaccd1228
[context adjustment]
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 198 +++++++++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 178 +++++++++++++-----
3 files changed, 328 insertions(+), 49 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -0,0 +1,198 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016, Freescale Semiconductor
+ *
+ * Mingkai Hu <mingkai.hu@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "fsl-ls1046a.dtsi"
+
+/ {
+ model = "LS1046A RDB Board";
+ compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
+
+ aliases {
+ ethernet0 = &fm1mac3;
+ ethernet1 = &fm1mac4;
+ ethernet2 = &fm1mac5;
+ ethernet3 = &fm1mac6;
+ ethernet4 = &fm1mac9;
+ ethernet5 = &fm1mac10;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+ adt7461a@4c {
+ compatible = "adi,adt7461";
+ reg = <0x4c>;
+ };
+ eeprom@56 {
+ compatible = "at24,24c512";
+ reg = <0x52>;
+ };
+ eeprom@57 {
+ compatible = "at24,24c512";
+ reg = <0x53>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ };
+};
+
+&ifc {
+ status = "okay";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ /* NAND Flashe and CPLD on board */
+ ranges = <0x0 0x0 0x0 0x7e800000 0x00010000
+ 0x2 0x0 0x0 0x7fb00000 0x00000100>;
+
+ nand@0,0 {
+ compatible = "fsl,ifc-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x0 0x0 0x10000>;
+ };
+
+ cpld: board-control@2,0 {
+ compatible = "fsl,ls1046ardb-cpld";
+ reg = <0x2 0x0 0x0000100>;
+ };
+};
+
+&qspi {
+ num-cs = <2>;
+ bus-num = <0>;
+ status = "okay";
+
+ qflash0: s25fs128s@0 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+
+ qflash1: s25fs128s@1 {
+ compatible = "spansion,m25p80";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <1>;
+ };
+
+};
+
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+&fman0 {
+ ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&sgmii_phy1>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&sgmii_phy2>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 { /* 10GEC1 */
+ phy-handle = <&aqr106_phy>;
+ phy-connection-type = "xgmii";
+ };
+
+ ethernet@f2000 { /* 10GEC2 */
+ fixed-link = <0 1 10000 0 0>;
+ phy-connection-type = "xgmii";
+ };
+
+ mdio@fc000 {
+ rgmii_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ rgmii_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ sgmii_phy1: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+ sgmii_phy2: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+ };
+
+ mdio@fd000 {
+ aqr106_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ interrupts = <0 131 4>;
+ reg = <0x0>;
+ };
+ };
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -51,13 +51,7 @@
#size-cells = <2>;
aliases {
- ethernet0 = &fm1mac1;
- ethernet1 = &fm1mac2;
- ethernet2 = &fm1mac3;
- ethernet3 = &fm1mac4;
- ethernet4 = &fm1mac5;
- ethernet5 = &fm1mac6;
- ethernet6 = &fm1mac9;
+ crypto = &crypto;
};
cpus {
@@ -70,6 +64,7 @@
reg = <0x0>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu1: cpu@1 {
@@ -78,6 +73,7 @@
reg = <0x1>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu2: cpu@2 {
@@ -86,6 +82,7 @@
reg = <0x2>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PH20>;
};
cpu3: cpu@3 {
@@ -94,6 +91,7 @@
reg = <0x3>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_PH20>;
};
l2: l2-cache {
@@ -101,6 +99,19 @@
};
};
+ idle-states {
+ entry-method = "arm,psci";
+
+ CPU_PH20: cpu-ph20 {
+ compatible = "arm,idle-state";
+ idle-state-name = "PH20";
+ arm,psci-suspend-param = <0x00010000>;
+ entry-latency-us = <1000>;
+ exit-latency-us = <1000>;
+ min-residency-us = <3000>;
+ };
+ };
+
memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0 0x80000000>;
@@ -193,6 +204,49 @@
bus-width = <4>;
};
+ crypto: crypto@1700000 {
+ compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
+ "fsl,sec-v4.0";
+ fsl,sec-era = <8>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x1700000 0x100000>;
+ reg = <0x00 0x1700000 0x0 0x100000>;
+ interrupts = <0 75 0x4>;
+
+ sec_jr0: jr@10000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x10000 0x10000>;
+ interrupts = <0 71 0x4>;
+ };
+
+ sec_jr1: jr@20000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x20000 0x10000>;
+ interrupts = <0 72 0x4>;
+ };
+
+ sec_jr2: jr@30000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x30000 0x10000>;
+ interrupts = <0 73 0x4>;
+ };
+
+ sec_jr3: jr@40000 {
+ compatible = "fsl,sec-v5.4-job-ring",
+ "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x40000 0x10000>;
+ interrupts = <0 74 0x4>;
+ };
+ };
+
qman: qman@1880000 {
compatible = "fsl,qman";
reg = <0x00 0x1880000 0x0 0x10000>;
@@ -490,6 +544,19 @@
fsl,qman-channel-id = <0x800>;
};
+ fman0_10g_rx1: port@91000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-port-10g-rx";
+ reg = <0x91000 0x1000>;
+ };
+
+ fman0_10g_tx1: port@b1000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-port-10g-tx";
+ reg = <0xb1000 0x1000>;
+ fsl,qman-channel-id = <0x801>;
+ };
+
fm1mac9: ethernet@f0000 {
cell-index = <0>;
compatible = "fsl,fman-memac";
@@ -497,6 +564,13 @@
fsl,port-handles = <&fman0_10g_rx0 &fman0_10g_tx0>;
};
+ fm1mac10: ethernet@f2000 {
+ cell-index = <1>;
+ compatible = "fsl,fman-memac";
+ reg = <0xf2000 0x1000>;
+ fsl,port-handles = <&fman0_10g_rx1 &fman0_10g_tx1>;
+ };
+
mdio@f1000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -504,6 +578,13 @@
reg = <0xf1000 0x1000>;
};
+ mdio@f3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0xf3000 0x1000>;
+ };
+
ptp_timer0: rtc@fe000 {
compatible = "fsl,fman-rtc";
reg = <0xfe000 0x1000>;
@@ -657,7 +738,7 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2950000 0x0 0x1000>;
interrupts = <0 48 0x4>;
- clocks = <&clockgen 0 0>;
+ clocks = <&clockgen 4 0>;
clock-names = "ipg";
status = "disabled";
};
@@ -712,7 +793,7 @@
reg = <0x0 0x29d0000 0x0 0x10000>;
interrupts = <0 86 0x4>;
big-endian;
- rcpm-wakeup = <&rcpm 0x0 0x20000000>;
+ rcpm-wakeup = <&rcpm 0x00020000 0x0>;
status = "okay";
};
@@ -789,34 +870,34 @@
big-endian;
};
- msi1: msi-controller@1580000 {
- compatible = "fsl,1s1046a-msi";
- reg = <0x0 0x1580000 0x0 0x10000>;
+ msi: msi-controller@1580000 {
+ compatible = "fsl,ls1046a-msi";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
msi-controller;
- interrupts = <0 116 0x4>,
- <0 111 0x4>,
- <0 112 0x4>,
- <0 113 0x4>;
- };
- msi2: msi-controller@1590000 {
- compatible = "fsl,1s1046a-msi";
- reg = <0x0 0x1590000 0x0 0x10000>;
- msi-controller;
- interrupts = <0 126 0x4>,
- <0 121 0x4>,
- <0 122 0x4>,
- <0 123 0x4>;
- };
-
- msi3: msi-controller@15a0000 {
- compatible = "fsl,1s1046a-msi";
- reg = <0x0 0x15a0000 0x0 0x10000>;
- msi-controller;
- interrupts = <0 160 0x4>,
- <0 155 0x4>,
- <0 156 0x4>,
- <0 157 0x4>;
+ msi-bank@1580000 {
+ reg = <0x0 0x1580000 0x0 0x10000>;
+ interrupts = <0 116 0x4>,
+ <0 111 0x4>,
+ <0 112 0x4>,
+ <0 113 0x4>;
+ };
+ msi-bank@1590000 {
+ reg = <0x0 0x1590000 0x0 0x10000>;
+ interrupts = <0 126 0x4>,
+ <0 121 0x4>,
+ <0 122 0x4>,
+ <0 123 0x4>;
+ };
+ msi-bank@15a0000 {
+ reg = <0x0 0x15a0000 0x0 0x10000>;
+ interrupts = <0 160 0x4>,
+ <0 155 0x4>,
+ <0 156 0x4>,
+ <0 157 0x4>;
+ };
};
pcie@3400000 {
@@ -826,15 +907,16 @@
reg-names = "regs", "config";
interrupts = <0 118 0x4>, /* controller interrupt */
<0 117 0x4>; /* PME interrupt */
- interrupt-names = "intr", "pme";
+ interrupt-names = "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
+ dma-coherent;
num-lanes = <4>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&msi1>;
+ msi-parent = <&msi>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 110 0x4>,
@@ -850,15 +932,16 @@
reg-names = "regs", "config";
interrupts = <0 128 0x4>,
<0 127 0x4>;
- interrupt-names = "intr", "pme";
+ interrupt-names = "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
+ dma-coherent;
num-lanes = <2>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&msi2>;
+ msi-parent = <&msi>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 120 0x4>,
@@ -874,15 +957,16 @@
reg-names = "regs", "config";
interrupts = <0 162 0x4>,
<0 161 0x4>;
- interrupt-names = "intr", "pme";
+ interrupt-names = "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
+ dma-coherent;
num-lanes = <2>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
- msi-parent = <&msi3>;
+ msi-parent = <&msi>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic 0 154 0x4>,
@@ -894,14 +978,6 @@
fsl,dpaa {
compatible = "fsl,ls1046a-dpaa", "simple-bus", "fsl,dpaa";
- ethernet@0 {
- compatible = "fsl,dpa-ethernet";
- fsl,fman-mac = <&fm1mac1>;
- };
- ethernet@1 {
- compatible = "fsl,dpa-ethernet";
- fsl,fman-mac = <&fm1mac2>;
- };
ethernet@2 {
compatible = "fsl,dpa-ethernet";
fsl,fman-mac = <&fm1mac3>;
@@ -922,6 +998,10 @@
compatible = "fsl,dpa-ethernet";
fsl,fman-mac = <&fm1mac9>;
};
+ ethernet@9 {
+ compatible = "fsl,dpa-ethernet";
+ fsl,fman-mac = <&fm1mac10>;
+ };
};
qportals: qman-portals@500000000 {
Reference in a new issue Copy permalink