openwrtv3/openwrt/package/linux/kernel-source/drivers/net/diag/diag_led.c

227 lines
4.4 KiB
C
Raw Normal View History

// replacement diag module
// (c) 2004 openwrt
// mbm at alt dot org
//
// initial release 2004/03/28
//
// 2004/08/26 asus & buffalo support added
// 2005/03/14 asus wl-500g deluxe and buffalo v2 support added
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sysctl.h>
#include <asm/io.h>
#include <typedefs.h>
#include <bcm4710.h>
#include <sbutils.h>
extern char * nvram_get(const char *name);
static void *sbh;
// v2.x - - - - -
#define DIAG_GPIO (1<<1)
#define DMZ_GPIO (1<<7)
static void set_gpio(uint32 mask, uint32 value) {
sb_gpiocontrol(sbh,mask,0);
sb_gpioouten(sbh,mask,mask);
sb_gpioout(sbh,mask,value);
}
static void v2_set_diag(u8 state) {
set_gpio(DIAG_GPIO,state);
}
static void v2_set_dmz(u8 state) {
set_gpio(DMZ_GPIO,state);
}
// v1.x - - - - -
#define LED_DIAG 0x13
#define LED_DMZ 0x12
static void v1_set_diag(u8 state) {
if (!state) {
*(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF;
} else {
*(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG);
}
}
static void v1_set_dmz(u8 state) {
if (!state) {
*(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF;
} else {
*(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ);
}
}
// - - - - -
static void ignore(u8 ignored) {};
// - - - - -
#define BIT_DMZ 0x01
#define BIT_DIAG 0x04
void (*set_diag)(u8 state);
void (*set_dmz)(u8 state);
static unsigned int diag = 0;
static void diag_change()
{
//printk(KERN_INFO "led -> %02x\n",diag);
set_diag(0xFF); // off
set_dmz(0xFF); // off
if(diag & BIT_DIAG)
set_diag(0x00); // on
if(diag & BIT_DMZ)
set_dmz(0x00); // on
}
static int proc_diag(ctl_table *table, int write, struct file *filp,
void *buffer, size_t *lenp)
{
int r;
r = proc_dointvec(table, write, filp, buffer, lenp);
if (write && !r) {
diag_change();
}
return r;
}
// - - - - -
static unsigned char reset_gpio = 0;
static unsigned char reset_polarity = 0;
static unsigned int reset = 0;
static int proc_reset(ctl_table *table, int write, struct file *filp,
void *buffer, size_t *lenp)
{
if (reset_gpio) {
sb_gpiocontrol(sbh,reset_gpio,reset_gpio);
sb_gpioouten(sbh,reset_gpio,0);
reset=!(sb_gpioin(sbh)&reset_gpio);
if (reset_polarity) reset=!reset;
} else {
reset=0;
}
return proc_dointvec(table, write, filp, buffer, lenp);
}
// - - - - -
static struct ctl_table_header *diag_sysctl_header;
static ctl_table sys_diag[] = {
{
ctl_name: 2000,
procname: "diag",
data: &diag,
maxlen: sizeof(diag),
mode: 0644,
proc_handler: proc_diag
},
{
ctl_name: 2001,
procname: "reset",
data: &reset,
maxlen: sizeof(reset),
mode: 0444,
proc_handler: proc_reset
},
{ 0 }
};
static int __init diag_init()
{
char *buf;
u32 board_type;
sbh = sb_kattach();
sb_gpiosetcore(sbh);
board_type = sb_boardtype(sbh);
printk(KERN_INFO "diag boardtype: %08x\n",board_type);
set_diag=ignore;
set_dmz=ignore;
if ((board_type & 0xf00) == 0x400) {
board_type=1;
buf=nvram_get("boardtype")?:"";
if (!strcmp(buf,"bcm94710dev")) {
buf=nvram_get("boardnum")?:"";
if (!strcmp(buf,"42")) {
// wrt54g v1.x
set_diag=v1_set_diag;
set_dmz=v1_set_dmz;
reset_gpio=(1<<6);
reset_polarity=0;
} else if (!strcmp(buf,"asusX")) {
//asus wl-500g
//no leds
reset_gpio=(1<<6);
reset_polarity=1;
}
} else if (!strcmp(buf,"bcm94710ap")) {
buf=nvram_get("boardnum")?:"";
if (!strcmp(buf,"42")) {
// buffalo
set_dmz=v2_set_dmz;
reset_gpio=(1<<4);
reset_polarity=1;
} else if (!strcmp(buf,"44")) {
//dell truemobile
set_dmz=v2_set_dmz;
reset_gpio=(1<<0);
reset_polarity=0;
}
}
} else {
board_type=2;
set_diag=v2_set_diag;
set_dmz=v2_set_dmz;
reset_gpio=(1<<6);
reset_polarity=0;
buf=nvram_get("boardnum")?:"";
if (!strcmp(buf,"44")) {
//motorola
set_diag=ignore;
set_dmz=ignore;
reset_gpio=(1<<5);
reset_polarity=0;
}
if (!strcmp(buf,"00")) {
//buffalo
set_diag=ignore;
set_dmz=ignore;
reset_gpio=(1<<7);
reset_polarity=1;
}
if (!strcmp(buf,"45")) {
//wl-500g deluxe
set_diag=ignore;
set_dmz=ignore;
reset_gpio=(1<<6);
reset_polarity=1;
}
}
printk(KERN_INFO "using v%d hardware\n",board_type);
diag_sysctl_header = register_sysctl_table(sys_diag, 0);
diag_change();
return 0;
}
static void __exit diag_exit()
{
unregister_sysctl_table(diag_sysctl_header);
}
module_init(diag_init);
module_exit(diag_exit);