openwrtv3/target/linux/rb532/files/arch/mips/rb500/devices.c

289 lines
6.9 KiB
C
Raw Normal View History

/*
* RouterBoard 500 Platform devices
*
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/bootinfo.h>
#include <asm/rc32434/rc32434.h>
#include <asm/rc32434/dma.h>
#include <asm/rc32434/dma_v.h>
#include <asm/rc32434/eth.h>
#include <asm/rc32434/rb.h>
#define ETH0_DMA_RX_IRQ GROUP1_IRQ_BASE + 0
#define ETH0_DMA_TX_IRQ GROUP1_IRQ_BASE + 1
#define ETH0_RX_OVR_IRQ GROUP3_IRQ_BASE + 9
#define ETH0_TX_UND_IRQ GROUP3_IRQ_BASE + 10
#define ETH0_RX_DMA_ADDR (DMA0_PhysicalAddress + 0*DMA_CHAN_OFFSET)
#define ETH0_TX_DMA_ADDR (DMA0_PhysicalAddress + 1*DMA_CHAN_OFFSET)
/* NAND definitions */
#define MEM32(x) *((volatile unsigned *) (x))
#define GPIO_RDY (1 << 0x08)
#define GPIO_WPX (1 << 0x09)
#define GPIO_ALE (1 << 0x0a)
#define GPIO_CLE (1 << 0x0b)
extern char* board_type;
static struct resource korina_dev0_res[] = {
{
.name = "korina_regs",
.start = ETH0_PhysicalAddress,
.end = ETH0_PhysicalAddress + sizeof(ETH_t),
.flags = IORESOURCE_MEM,
}, {
.name = "korina_rx",
.start = ETH0_DMA_RX_IRQ,
.end = ETH0_DMA_RX_IRQ,
.flags = IORESOURCE_IRQ
}, {
.name = "korina_tx",
.start = ETH0_DMA_TX_IRQ,
.end = ETH0_DMA_TX_IRQ,
.flags = IORESOURCE_IRQ
}, {
.name = "korina_ovr",
.start = ETH0_RX_OVR_IRQ,
.end = ETH0_RX_OVR_IRQ,
.flags = IORESOURCE_IRQ
}, {
.name = "korina_und",
.start = ETH0_TX_UND_IRQ,
.end = ETH0_TX_UND_IRQ,
.flags = IORESOURCE_IRQ
}, {
.name = "korina_dma_rx",
.start = ETH0_RX_DMA_ADDR,
.end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
.flags = IORESOURCE_MEM,
}, {
.name = "korina_dma_tx",
.start = ETH0_TX_DMA_ADDR,
.end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
.flags = IORESOURCE_MEM,
}
};
static struct korina_device korina_dev0_data = {
.name = "korina0",
.mac = {0xde, 0xca, 0xff, 0xc0, 0xff, 0xee}
};
static struct platform_device korina_dev0 = {
.id = 0,
.name = "korina",
.dev.platform_data = &korina_dev0_data,
.resource = korina_dev0_res,
.num_resources = ARRAY_SIZE(korina_dev0_res),
};
#define CF_GPIO_NUM 13
static struct resource cf_slot0_res[] = {
{
.name = "cf_membase",
.flags = IORESOURCE_MEM
}, {
.name = "cf_irq",
.start = (8 + 4 * 32 + CF_GPIO_NUM), /* 149 */
.end = (8 + 4 * 32 + CF_GPIO_NUM),
.flags = IORESOURCE_IRQ
}
};
static struct cf_device cf_slot0_data = {
.gpio_pin = 13
};
static struct platform_device cf_slot0 = {
.id = 0,
.name = "rb500-cf",
.dev.platform_data = &cf_slot0_data,
.resource = cf_slot0_res,
.num_resources = ARRAY_SIZE(cf_slot0_res),
};
/* Resources and device for NAND. There is no data needed and no irqs, so just define the memory used. */
int rb500_dev_ready(struct mtd_info *mtd)
{
return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
}
void rb500_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *chip = mtd->priv;
unsigned char orbits, nandbits;
if (ctrl & NAND_CTRL_CHANGE) {
orbits = (ctrl & NAND_CLE) << 1;
orbits |= (ctrl & NAND_ALE) >> 1;
nandbits = (~ctrl & NAND_CLE) << 1;
nandbits |= (~ctrl & NAND_ALE) >> 1;
changeLatchU5(orbits, nandbits);
}
if (cmd != NAND_CMD_NONE)
writeb(cmd, chip->IO_ADDR_W);
}
static struct resource nand_slot0_res[] = {
[0] = {
.name = "nand_membase",
.flags = IORESOURCE_MEM
}
};
struct platform_nand_data rb500_nand_data = {
.ctrl.dev_ready = rb500_dev_ready,
.ctrl.cmd_ctrl = rb500_cmd_ctrl,
};
static struct platform_device nand_slot0 = {
.name = "gen_nand",
.id = -1,
.resource = nand_slot0_res,
.num_resources = ARRAY_SIZE(nand_slot0_res),
.dev.platform_data = &rb500_nand_data,
};
static struct mtd_partition rb500_partition_info[] = {
{
.name = "Routerboard NAND boot",
.offset = 0,
.size = 4 * 1024 * 1024,
}, {
.name = "rootfs",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL,
}
};
static struct platform_device rb500_led = {
.name = "rb500-led",
.id = 0,
};
static struct platform_device *rb500_devs[] = {
&korina_dev0,
&nand_slot0,
&cf_slot0,
&rb500_led
};
static void __init parse_mac_addr(char *macstr)
{
int i, j;
unsigned char result, value;
for (i = 0; i < 6; i++) {
result = 0;
if (i != 5 && *(macstr + 2) != ':')
return;
for (j = 0; j < 2; j++) {
if (isxdigit(*macstr)
&& (value =
isdigit(*macstr) ? *macstr -
'0' : toupper(*macstr) - 'A' + 10) < 16) {
result = result * 16 + value;
macstr++;
} else
return;
}
macstr++;
korina_dev0_data.mac[i] = result;
}
}
/* DEVICE CONTROLLER 1 */
#define CFG_DC_DEV1 (void*)0xb8010010
#define CFG_DC_DEV2 (void*)0xb8010020
#define CFG_DC_DEVBASE 0x0
#define CFG_DC_DEVMASK 0x4
#define CFG_DC_DEVC 0x8
#define CFG_DC_DEVTC 0xC
/* NAND definitions */
#define NAND_CHIP_DELAY 25
static void __init rb500_nand_setup(void)
{
switch (mips_machtype) {
case MACH_MIKROTIK_RB532A:
changeLatchU5(LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE | LO_WPX);
break;
default:
changeLatchU5(LO_WPX | LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE);
break;
}
/* Setup NAND specific settings */
rb500_nand_data.chip.nr_chips = 1;
rb500_nand_data.chip.nr_partitions = ARRAY_SIZE(rb500_partition_info);
rb500_nand_data.chip.partitions = rb500_partition_info;
rb500_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
rb500_nand_data.chip.options = NAND_NO_AUTOINCR;
}
static int __init plat_setup_devices(void)
{
/* Look for the CF card reader */
if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK))
rb500_devs[1] = NULL;
else {
cf_slot0_res[0].start =
readl(CFG_DC_DEV1 + CFG_DC_DEVBASE);
cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
}
/* Read the NAND resources from the device controller */
nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE);
nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
/* Initialise the NAND device */
rb500_nand_setup();
return platform_add_devices(rb500_devs, ARRAY_SIZE(rb500_devs));
}
static int __init setup_kmac(char *s)
{
printk("korina mac = %s\n", s);
parse_mac_addr(s);
return 0;
}
__setup("kmac=", setup_kmac);
arch_initcall(plat_setup_devices);