KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/arc770/image/Makefile

69 lines
1.8 KiB
Makefile
Raw Normal View History

linux: add support of Synopsys ARC770-based boards This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
#
# Copyright (C) 2015 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
arc: Build uImage as well as vmlinux output files Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-05-31 17:12:21 +00:00
# On ARC initramfs is put before entry point and so entry point moves
# in memory from build to built. Thus we need to extract EP from vmlinux
# every time late in building process.
define Build/calculate-ep
$(eval KERNEL_ENTRY=$(shell $(KERNEL_CROSS)readelf -h $(LINUX_DIR)/vmlinux | grep "Entry point address" | grep -o 0x.*))
endef
linux: add support of Synopsys ARC770-based boards This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
define Build/patch-dtb
$(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb)
$(STAGING_DIR_HOST)/bin/patch-dtb $@ $@.dtb
endef
# Shared device definition: applies to every defined device
define Device/Default
PROFILES = Default $$(DEVICE_PROFILE)
targets: add kernel image dependencies on device tree files Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48146
2016-01-06 18:39:06 +00:00
KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
linux: add support of Synopsys ARC770-based boards This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
DEVICE_PROFILE :=
endef
image.mk: clean up redundant code related to DEVICE_DTS It is used by a core build template, so the variable should be initialized and added to DEVICE_VARS in the core. Same for DEVICE_DTS_DIR Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-14 11:58:23 +00:00
DEVICE_VARS += DEVICE_PROFILE
linux: add support of Synopsys ARC770-based boards This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
arc: Build uImage as well as vmlinux output files Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-05-31 17:12:21 +00:00
define Device/vmlinux
KERNEL_SUFFIX := .elf
KERNEL_INITRAMFS := kernel-bin | patch-dtb
KERNEL_INITRAMFS_NAME = vmlinux-initramfs.elf
endef
define Device/uImage
KERNEL_SUFFIX := .bin
KERNEL_INITRAMFS := kernel-bin | patch-dtb | calculate-ep | uImage none
KERNEL_LOADADDR := 0x80000000
endef
define add_arc770_uImage
define Device/$(1)-uImage
$(call Device/uImage)
DEVICE_PROFILE := $(1)
DEVICE_DTS := $(1)
endef
TARGET_DEVICES += $(1)-uImage
endef
define add_arc770_vmlinux
define Device/$(1)-vmlinux
$(call Device/vmlinux)
linux: add support of Synopsys ARC770-based boards This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
DEVICE_PROFILE := $(1)
DEVICE_DTS := $(1)
endef
arc: Build uImage as well as vmlinux output files Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-05-31 17:12:21 +00:00
TARGET_DEVICES += $(1)-vmlinux
linux: add support of Synopsys ARC770-based boards This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
endef
# DesignWare AXS101
arc: Build uImage as well as vmlinux output files Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-05-31 17:12:21 +00:00
$(eval $(call add_arc770_vmlinux,axs101))
$(eval $(call add_arc770_uImage,axs101))
linux: add support of Synopsys ARC770-based boards This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
# nSIM with ARC770
arc: Build uImage as well as vmlinux output files Initially for ARC we were building vmlinux images because it was both simpler and more convenient to debug Linux kernel in runt-time via JTAG. Now when base system works quite nice we may finally use U-Boot for loading the system image as well. Still we keep building vmlinux images as some of our boards are development boards and loading images with JTAG could be at some points very beneficial. Note for U-Boot header it's required to specify 2 values: * loading address * entry point (if it doesn't match loading address) and in case of ARC entry point (EP) not only differs from loading address but also changes from build to build due to initramfs being placed between loading address and text section. To accommodate that feature we have to calculate EP after vmlinux gets built and before call to mkimage. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-05-31 17:12:21 +00:00
$(eval $(call add_arc770_vmlinux,nsim_700))
$(eval $(call add_arc770_uImage,nsim_700))
linux: add support of Synopsys ARC770-based boards This patch introduces support of new boards with ARC cores. [1] Synopsys SDP board This is a new-generation development board from Synopsys that consists of base-board and CPU tile-board (which might have a real ASIC or FPGA with CPU image). It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C etc and is intended to be used for early development of ARC-based products. [2] nSIM This is a virtual board implemented in Synopsys proprietary software simulator (even though available for free for open source community). This board has only serial port as a peripheral and so it is meant to be used for runtime testing which is especially useful during bring-up of new tools and platforms. What's also important ARC cores are very configurable so there're many variations of options like cache sizes, their line lengths, additional hardware blocks like multipliers, dividers etc. And this board could be used to make sure built software still runs on different HW configurations. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jo-Philipp Wich <jow@openwrt.org> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
$(eval $(call BuildImage))
Reference in a new issue Copy permalink