openwrtv3/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-nbg6617.dts

/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 */

#include "qcom-ipq4019-ap.dk01.1.dtsi"
#include "qcom-ipq4019-bus.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>

/ {
	model = "ZyXEL NBG6617";
	compatible = "zyxel,nbg6617", "qcom,ipq4019";

	memory {
		device_type = "memory";
		reg = <0x80000000 0x10000000>;
	};

	aliases {
		led-boot = &power;
		led-failsafe = &power;
		led-running = &power;
		led-upgrade = &power;
	};

	reserved-memory {
		#address-cells = <0x1>;
		#size-cells = <0x1>;
		ranges;

		rsvd1@87000000 {
			reg = <0x87000000 0x0500000>;
			no-map;
		};

		wifi_dump@87500000 {
			reg = <0x87500000 0x600000>;
			no-map;
		};

		rsvd2@87B00000 {
			reg = <0x87b00000 0x500000>;
			no-map;
		};
	};

	soc {
		pinctrl@0x01000000 {
			led_pinmux {
				mux {
					pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
					drive-strength = <0x8>;
					bias-pull-up;
					output-high;
				};
			};
		};

		tcsr@194b000 {
			/* select hostmode */
			compatible = "qcom,tcsr";
			reg = <0x194b000 0x100>;
			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
			status = "ok";
		};

		ess_tcsr@1953000 {
			compatible = "qcom,tcsr";
			reg = <0x1953000 0x1000>;
			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
		};


		tcsr@1949000 {
			compatible = "qcom,tcsr";
			reg = <0x1949000 0x100>;
			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
		};

		tcsr@1957000 {
			compatible = "qcom,tcsr";
			reg = <0x1957000 0x100>;
			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
		};

		counter@4a1000 {
			compatible = "qcom,qca-gcnt";
			reg = <0x4a1000 0x4>;
		};

		mdio@90000 {
			status = "okay";
		};

		ess-switch@c000000 {
			status = "okay";
		};

		ess-psgmii@98000 {
			status = "okay";
		};

		edma@c080000 {
			status = "okay";
		};

		wifi@a000000 {
			status = "okay";
		};

		wifi@a800000 {
			status = "okay";
		};

		cryptobam: dma@8e04000 {
			status = "okay";
		};

		crypto@8e3a000 {
			status = "okay";
		};
	};

	gpio-keys {
		compatible = "gpio-keys";

		wlan {
			label = "wlan";
			gpios = <&tlmm 0x2 GPIO_ACTIVE_HIGH>;
			linux,code = <KEY_RFKILL>;
		};

		wps {
			label = "wps";
			gpios = <&tlmm 0x3f GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};

		reset {
			label = "reset";
			gpios = <&tlmm 0x4 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		power: power {
			label = "nbg6617:green:power";
			gpios = <&tlmm 0x3 GPIO_ACTIVE_HIGH>;
		};

		wps {
			label = "nbg6617:green:wps";
			gpios = <&tlmm 0x1 GPIO_ACTIVE_HIGH>;
		};

		wlan2G {
			label = "nbg6617:green:wlan2G";
			gpios = <&tlmm 0x3a GPIO_ACTIVE_HIGH>;
		};

		wlan5G {
			label = "nbg6617:green:wlan5G";
			gpios = <&tlmm 0x5 GPIO_ACTIVE_HIGH>;
		};
	};
};


&spi_0 { /* BLSP1 QUP1 */
	status = "ok";

	mx25l25635e@0 {
		status = "disabled";
	};

	n25q128a11@0 {
		status = "okay";

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition0@0 {
				label = "all";
				reg = <0x00000000 0x08000000>;
				read-only; /* for now */
			};
		};

	};
};