413 lines
7.8 KiB
Text
413 lines
7.8 KiB
Text
|
#include "qcom-ipq8064-v1.0.dtsi"
|
||
|
|
#include <dt-bindings/input/input.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
model = "TP-Link Archer C2600";
|
||
|
|
compatible = "tplink,c2600", "qcom,ipq8064";
|
||
|
|
|
||
|
|
memory@0 {
|
||
|
|
reg = <0x42000000 0x1e000000>;
|
||
|
|
device_type = "memory";
|
||
|
|
};
|
||
|
|
|
||
|
|
reserved-memory {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges;
|
||
|
|
rsvd@41200000 {
|
||
|
|
reg = <0x41200000 0x300000>;
|
||
|
|
no-map;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
aliases {
|
||
|
|
serial0 = &uart4;
|
||
|
|
mdio-gpio0 = &mdio0;
|
||
|
|
};
|
||
|
|
|
||
|
|
chosen {
|
||
|
|
linux,stdout-path = "serial0:115200n8";
|
||
|
|
};
|
||
|
|
|
||
|
|
soc {
|
||
|
|
pinmux@800000 {
|
||
|
|
i2c4_pins: i2c4_pinmux {
|
||
|
|
pins = "gpio12", "gpio13";
|
||
|
|
function = "gsbi4";
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
spi_pins: spi_pins {
|
||
|
|
mux {
|
||
|
|
pins = "gpio18", "gpio19", "gpio21";
|
||
|
|
function = "gsbi5";
|
||
|
|
drive-strength = <10>;
|
||
|
|
bias-none;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
nand_pins: nand_pins {
|
||
|
|
mux {
|
||
|
|
pins = "gpio34", "gpio35", "gpio36",
|
||
|
|
"gpio37", "gpio38", "gpio39",
|
||
|
|
"gpio40", "gpio41", "gpio42",
|
||
|
|
"gpio43", "gpio44", "gpio45",
|
||
|
|
"gpio46", "gpio47";
|
||
|
|
function = "nand";
|
||
|
|
drive-strength = <10>;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
|
||
|
|
pullups {
|
||
|
|
pins = "gpio39";
|
||
|
|
bias-pull-up;
|
||
|
|
};
|
||
|
|
|
||
|
|
hold {
|
||
|
|
pins = "gpio40", "gpio41", "gpio42",
|
||
|
|
"gpio43", "gpio44", "gpio45",
|
||
|
|
"gpio46", "gpio47";
|
||
|
|
bias-bus-hold;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
mdio0_pins: mdio0_pins {
|
||
|
|
mux {
|
||
|
|
pins = "gpio0", "gpio1";
|
||
|
|
function = "gpio";
|
||
|
|
drive-strength = <8>;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
rgmii2_pins: rgmii2_pins {
|
||
|
|
mux {
|
||
|
|
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
|
||
|
|
"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
|
||
|
|
function = "rgmii2";
|
||
|
|
drive-strength = <8>;
|
||
|
|
bias-disable;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
gsbi@16300000 {
|
||
|
|
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||
|
|
status = "ok";
|
||
|
|
serial@16340000 {
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
/*
|
||
|
|
* The i2c device on gsbi4 should not be enabled.
|
||
|
|
* On ipq806x designs gsbi4 i2c is meant for exclusive
|
||
|
|
* RPM usage. Turning this on in kernel manifests as
|
||
|
|
* i2c failure for the RPM.
|
||
|
|
*/
|
||
|
|
};
|
||
|
|
|
||
|
|
gsbi5: gsbi@1a200000 {
|
||
|
|
qcom,mode = <GSBI_PROT_SPI>;
|
||
|
|
status = "ok";
|
||
|
|
|
||
|
|
spi4: spi@1a280000 {
|
||
|
|
status = "ok";
|
||
|
|
spi-max-frequency = <50000000>;
|
||
|
|
|
||
|
|
pinctrl-0 = <&spi_pins>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
|
||
|
|
cs-gpios = <&qcom_pinmux 20 0>;
|
||
|
|
|
||
|
|
flash: m25p80@0 {
|
||
|
|
compatible = "s25fl256s1";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
spi-max-frequency = <50000000>;
|
||
|
|
reg = <0>;
|
||
|
|
|
||
|
|
SBL1@0 {
|
||
|
|
label = "SBL1";
|
||
|
|
reg = <0x0 0x20000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
MIBIB@20000 {
|
||
|
|
label = "MIBIB";
|
||
|
|
reg = <0x20000 0x20000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
SBL2@40000 {
|
||
|
|
label = "SBL2";
|
||
|
|
reg = <0x40000 0x20000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
SBL3@60000 {
|
||
|
|
label = "SBL3";
|
||
|
|
reg = <0x60000 0x30000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
DDRCONFIG@90000 {
|
||
|
|
label = "DDRCONFIG";
|
||
|
|
reg = <0x90000 0x10000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
SSD@a0000 {
|
||
|
|
label = "SSD";
|
||
|
|
reg = <0xa0000 0x10000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
TZ@b0000 {
|
||
|
|
label = "TZ";
|
||
|
|
reg = <0xb0000 0x30000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
RPM@e0000 {
|
||
|
|
label = "RPM";
|
||
|
|
reg = <0xe0000 0x20000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
fs-uboot@100000 {
|
||
|
|
label = "fs-uboot";
|
||
|
|
reg = <0x100000 0x70000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
uboot-env@170000 {
|
||
|
|
label = "uboot-env";
|
||
|
|
reg = <0x170000 0x40000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
radio@1b0000 {
|
||
|
|
label = "radio";
|
||
|
|
reg = <0x1b0000 0x40000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
os-image@1f0000 {
|
||
|
|
label = "os-image";
|
||
|
|
reg = <0x1f0000 0x200000>;
|
||
|
|
};
|
||
|
|
rootfs@3f0000 {
|
||
|
|
label = "rootfs";
|
||
|
|
reg = <0x3f0000 0x1b00000>;
|
||
|
|
};
|
||
|
|
defaultmac: default-mac@1ef0000 {
|
||
|
|
label = "default-mac";
|
||
|
|
reg = <0x1ef0000 0x00200>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
pin@1ef0200 {
|
||
|
|
label = "pin";
|
||
|
|
reg = <0x1ef0200 0x00200>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
product-info@1ef0400 {
|
||
|
|
label = "product-info";
|
||
|
|
reg = <0x1ef0400 0x0fc00>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
partition-table@1f00000 {
|
||
|
|
label = "partition-table";
|
||
|
|
reg = <0x1f00000 0x10000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
soft-version@1f10000 {
|
||
|
|
label = "soft-version";
|
||
|
|
reg = <0x1f10000 0x10000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
support-list@1f20000 {
|
||
|
|
label = "support-list";
|
||
|
|
reg = <0x1f20000 0x10000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
profile@1f30000 {
|
||
|
|
label = "profile";
|
||
|
|
reg = <0x1f30000 0x10000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
default-config@1f40000 {
|
||
|
|
label = "default-config";
|
||
|
|
reg = <0x1f40000 0x10000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
user-config@1f50000 {
|
||
|
|
label = "user-config";
|
||
|
|
reg = <0x1f50000 0x40000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
qos-db@1f90000 {
|
||
|
|
label = "qos-db";
|
||
|
|
reg = <0x1f90000 0x40000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
usb-config@1fd0000 {
|
||
|
|
label = "usb-config";
|
||
|
|
reg = <0x1fd0000 0x10000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
log@1fe0000 {
|
||
|
|
label = "log";
|
||
|
|
reg = <0x1fe0000 0x20000>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
phy@100f8800 { /* USB3 port 1 HS phy */
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
phy@100f8830 { /* USB3 port 1 SS phy */
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
phy@110f8800 { /* USB3 port 0 HS phy */
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
phy@110f8830 { /* USB3 port 0 SS phy */
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
usb30@0 {
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
usb30@1 {
|
||
|
|
status = "ok";
|
||
|
|
};
|
||
|
|
|
||
|
|
pcie0: pci@1b500000 {
|
||
|
|
status = "ok";
|
||
|
|
phy-tx0-term-offset = <7>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pcie1: pci@1b700000 {
|
||
|
|
status = "ok";
|
||
|
|
phy-tx0-term-offset = <7>;
|
||
|
|
};
|
||
|
|
|
||
|
|
mdio0: mdio {
|
||
|
|
compatible = "virtual,mdio-gpio";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
|
||
|
|
pinctrl-0 = <&mdio0_pins>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
|
||
|
|
phy0: ethernet-phy@0 {
|
||
|
|
device_type = "ethernet-phy";
|
||
|
|
reg = <0>;
|
||
|
|
qca,ar8327-initvals = <
|
||
|
|
0x00004 0x7600000 /* PAD0_MODE */
|
||
|
|
0x00008 0x1000000 /* PAD5_MODE */
|
||
|
|
0x0000c 0x80 /* PAD6_MODE */
|
||
|
|
0x000e4 0xaa545 /* MAC_POWER_SEL */
|
||
|
|
0x000e0 0xc74164de /* SGMII_CTRL */
|
||
|
|
0x0007c 0x4e /* PORT0_STATUS */
|
||
|
|
0x00094 0x4e /* PORT6_STATUS */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
phy4: ethernet-phy@4 {
|
||
|
|
device_type = "ethernet-phy";
|
||
|
|
reg = <4>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
gmac1: ethernet@37200000 {
|
||
|
|
status = "ok";
|
||
|
|
phy-mode = "rgmii";
|
||
|
|
qcom,id = <1>;
|
||
|
|
|
||
|
|
pinctrl-0 = <&rgmii2_pins>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
|
||
|
|
mtd-mac-address = <&defaultmac 0x8>;
|
||
|
|
mtd-mac-address-increment = <1>;
|
||
|
|
|
||
|
|
fixed-link {
|
||
|
|
speed = <1000>;
|
||
|
|
full-duplex;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
gmac2: ethernet@37400000 {
|
||
|
|
status = "ok";
|
||
|
|
phy-mode = "sgmii";
|
||
|
|
qcom,id = <2>;
|
||
|
|
|
||
|
|
mtd-mac-address = <&defaultmac 0x8>;
|
||
|
|
|
||
|
|
fixed-link {
|
||
|
|
speed = <1000>;
|
||
|
|
full-duplex;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio-keys {
|
||
|
|
compatible = "gpio-keys";
|
||
|
|
|
||
|
|
wifi {
|
||
|
|
label = "wifi";
|
||
|
|
gpios = <&qcom_pinmux 49 1>;
|
||
|
|
linux,code = <KEY_WLAN>;
|
||
|
|
};
|
||
|
|
|
||
|
|
reset {
|
||
|
|
label = "reset";
|
||
|
|
gpios = <&qcom_pinmux 64 1>;
|
||
|
|
linux,code = <KEY_RESTART>;
|
||
|
|
};
|
||
|
|
|
||
|
|
wps {
|
||
|
|
label = "wps";
|
||
|
|
gpios = <&qcom_pinmux 65 1>;
|
||
|
|
linux,code = <KEY_WPS_BUTTON>;
|
||
|
|
};
|
||
|
|
ledgeneral {
|
||
|
|
label = "ledgeneral";
|
||
|
|
gpios = <&qcom_pinmux 16 1>;
|
||
|
|
linux,code = <KEY_DOLLAR>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio-leds {
|
||
|
|
compatible = "gpio-leds";
|
||
|
|
|
||
|
|
lan {
|
||
|
|
label = "lan:blue";
|
||
|
|
gpios = <&qcom_pinmux 6 0>;
|
||
|
|
};
|
||
|
|
usb4 {
|
||
|
|
label = "usb_4:blue";
|
||
|
|
gpios = <&qcom_pinmux 7 0>;
|
||
|
|
};
|
||
|
|
usb2 {
|
||
|
|
label = "usb_2:blue";
|
||
|
|
gpios = <&qcom_pinmux 8 0>;
|
||
|
|
};
|
||
|
|
wps {
|
||
|
|
label = "wps:blue";
|
||
|
|
gpios = <&qcom_pinmux 9 0>;
|
||
|
|
};
|
||
|
|
wan_blue {
|
||
|
|
label = "wan:blue";
|
||
|
|
gpios = <&qcom_pinmux 33 1>;
|
||
|
|
};
|
||
|
|
status {
|
||
|
|
label = "status:blue";
|
||
|
|
gpios = <&qcom_pinmux 53 0>;
|
||
|
|
default-state = "on";
|
||
|
|
};
|
||
|
|
ledgnr {
|
||
|
|
label = "ledgnr:blue";
|
||
|
|
gpios = <&qcom_pinmux 66 0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&adm_dma {
|
||
|
|
status = "ok";
|
||
|
|
};
|