openwrtv3/target/linux/brcm47xx/patches-3.14/141-MIPS-BCM47XX-add-detection-and-GPIO-config-for-Sieme.patch

From c546fa49901252cbc1e4046d7188858b2f9e130f Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 10 Jan 2014 23:55:43 +0100
Subject: [PATCH 2/2] MIPS: BCM47XX: add detection and GPIO config for Siemens
 SE505v2

This adds board detection for the Siemens SE505v2 and the led gpio
configuration. This board does not have any buttons.
This is based on OpenWrt broadcom-diag and Manuel Munz's nvram dump.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
 arch/mips/bcm47xx/board.c                          |   17 +++++++++++++++++
 arch/mips/bcm47xx/leds.c                           |   12 ++++++++++++
 arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h |    2 ++
 3 files changed, 31 insertions(+)

--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -182,6 +182,13 @@ struct bcm47xx_board_type_list3 bcm47xx_
 	{ {0}, NULL},
 };
 
+/* boardtype, boardrev */
+static const
+struct bcm47xx_board_type_list2 bcm47xx_board_list_board_type_rev[] __initconst = {
+	{{BCM47XX_BOARD_SIEMENS_SE505V2, "Siemens SE505 V2"}, "0x0101", "0x10"},
+	{ {0}, NULL},
+};
+
 static const
 struct bcm47xx_board_type bcm47xx_board_unknown[] __initconst = {
 	{BCM47XX_BOARD_UNKNOWN, "Unknown Board"},
@@ -275,6 +282,16 @@ static __init const struct bcm47xx_board
 				return &e3->board;
 		}
 	}
+
+	if (bcm47xx_nvram_getenv("boardtype", buf1, sizeof(buf1)) >= 0 &&
+	    bcm47xx_nvram_getenv("boardrev", buf2, sizeof(buf2)) >= 0 &&
+    	    bcm47xx_nvram_getenv("boardnum", buf3, sizeof(buf3)) ==  -ENOENT) {
+		for (e2 = bcm47xx_board_list_board_type_rev; e2->value1; e2++) {
+			if (!strcmp(buf1, e2->value1) &&
+			    !strcmp(buf2, e2->value2))
+				return &e2->board;
+		}
+	}
 	return bcm47xx_board_unknown;
 }
 
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -383,6 +383,14 @@ bcm47xx_leds_netgear_wnr834bv2[] __initc
 	BCM47XX_GPIO_LED(7, "unk", "connected", 0, LEDS_GPIO_DEFSTATE_OFF),
 };
 
+/* Siemens */
+static const struct gpio_led
+bcm47xx_leds_siemens_se505v2[] __initconst = {
+	BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(3, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(5, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
 /* SimpleTech */
 
 static const struct gpio_led
@@ -562,6 +570,10 @@ void __init bcm47xx_leds_register(void)
 		bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2);
 		break;
 
+	case BCM47XX_BOARD_SIEMENS_SE505V2:
+		bcm47xx_set_pdata(bcm47xx_leds_siemens_se505v2);
+		break;
+
 	case BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE:
 		bcm47xx_set_pdata(bcm47xx_leds_simpletech_simpleshare);
 		break;
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -94,6 +94,8 @@ enum bcm47xx_board {
 
 	BCM47XX_BOARD_PHICOMM_M1,
 
+	BCM47XX_BOARD_SIEMENS_SE505V2,
+
 	BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE,
 
 	BCM47XX_BOARD_ZTE_H218N,