openwrtv3/target/linux/ipq806x/patches-4.9/711-dts-ipq4019-add-ethernet-essedma-node.patch

93 lines
2.6 KiB
Diff
Raw Normal View History

From c611d3780fa101662a822d10acf8feb04ca97409 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@gmail.com>
Date: Sun, 20 Nov 2016 01:01:10 +0100
Subject: [PATCH] dts: ipq4019: add ethernet essedma node
This patch adds the device-tree node for the ethernet
interfaces.
Note: The driver isn't anywhere close to be upstream,
so the info might change.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -26,6 +26,8 @@
aliases {
spi0 = &spi_0;
i2c0 = &i2c_0;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
};
cpus {
@@ -366,6 +368,64 @@
status = "disabled";
};
+ edma@c080000 {
+ compatible = "qcom,ess-edma";
+ reg = <0xc080000 0x8000>;
+ qcom,page-mode = <0>;
+ qcom,rx_head_buf_size = <1540>;
+ qcom,mdio_supported;
+ qcom,poll_required = <1>;
+ qcom,num_gmac = <2>;
+ interrupts = <0 65 IRQ_TYPE_EDGE_RISING
+ 0 66 IRQ_TYPE_EDGE_RISING
+ 0 67 IRQ_TYPE_EDGE_RISING
+ 0 68 IRQ_TYPE_EDGE_RISING
+ 0 69 IRQ_TYPE_EDGE_RISING
+ 0 70 IRQ_TYPE_EDGE_RISING
+ 0 71 IRQ_TYPE_EDGE_RISING
+ 0 72 IRQ_TYPE_EDGE_RISING
+ 0 73 IRQ_TYPE_EDGE_RISING
+ 0 74 IRQ_TYPE_EDGE_RISING
+ 0 75 IRQ_TYPE_EDGE_RISING
+ 0 76 IRQ_TYPE_EDGE_RISING
+ 0 77 IRQ_TYPE_EDGE_RISING
+ 0 78 IRQ_TYPE_EDGE_RISING
+ 0 79 IRQ_TYPE_EDGE_RISING
+ 0 80 IRQ_TYPE_EDGE_RISING
+ 0 240 IRQ_TYPE_EDGE_RISING
+ 0 241 IRQ_TYPE_EDGE_RISING
+ 0 242 IRQ_TYPE_EDGE_RISING
+ 0 243 IRQ_TYPE_EDGE_RISING
+ 0 244 IRQ_TYPE_EDGE_RISING
+ 0 245 IRQ_TYPE_EDGE_RISING
+ 0 246 IRQ_TYPE_EDGE_RISING
+ 0 247 IRQ_TYPE_EDGE_RISING
+ 0 248 IRQ_TYPE_EDGE_RISING
+ 0 249 IRQ_TYPE_EDGE_RISING
+ 0 250 IRQ_TYPE_EDGE_RISING
+ 0 251 IRQ_TYPE_EDGE_RISING
+ 0 252 IRQ_TYPE_EDGE_RISING
+ 0 253 IRQ_TYPE_EDGE_RISING
+ 0 254 IRQ_TYPE_EDGE_RISING
+ 0 255 IRQ_TYPE_EDGE_RISING>;
+
+ status = "disabled";
+
+ gmac0: gmac0 {
+ local-mac-address = [00 00 00 00 00 00];
+ vlan_tag = <1 0x1f>;
+ };
+
+ gmac1: gmac1 {
+ local-mac-address = [00 00 00 00 00 00];
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <1>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ vlan_tag = <2 0x20>;
+ };
+ };
+
usb3_ss_phy: ssphy@9a000 {
compatible = "qca,uni-ssphy";
reg = <0x9a000 0x800>;