KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/ramips/image/rt288x.mk

92 lines
2.2 KiB
Makefile
Raw Normal View History

ramips: move different subtarget image generation to separate makefiles to improve maintainability - all subtarget specific defines are in their own files - common defines left in main Makefile - each subtarget makefile idefed with SUBTARGET - all subtargets compile tested - few seems to be broken/unneeded things marked with FIXME Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49104
2016-04-01 07:11:48 +00:00
#
# RT288X Profiles
#
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
define Build/gemtek-header
ramips: fix Airlink AR725W factory image build The factory image can't be bigger than 3328 KByte. If the image is bigger than that, the gemtek-header tool throws an error and breaks the build. Make sure the output file to which the gemtek header should be added exists and wasn't removed during the check-size step because of it size. This will prevent hard errors in case the factory image is to big similar to what is done for sysupgrade images. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-04 10:02:36 +00:00
if [ -f $@ ]; then \
mkheader_gemtek $@ $@.new $(1) && \
mv $@.new $@; \
fi
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
endef
ramips: move different subtarget image generation to separate makefiles to improve maintainability - all subtarget specific defines are in their own files - common defines left in main Makefile - each subtarget makefile idefed with SUBTARGET - all subtargets compile tested - few seems to be broken/unneeded things marked with FIXME Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49104
2016-04-01 07:11:48 +00:00
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
define Device/ar670w
DTS := AR670W
ramips: set blocksize for 4MB devices Set the blocksize for devices having only 4MB of flash for ramips devices already using the new image build code. Informations about the used flash chip are gathered from the OpenWrt wiki, wikidevi, forums, OEM bootlogs or the compatible property in the device tree source file. The en25q32b from the AirLive Air3GII does not have 4k support in the kernel. For the following boards no information about the used flash chip could be found and a 64k blocksize is assumed: - Ralink V11ST-FE - Ralink AP-RT3052-V22RW-2X2 - MediaTek MT7628 EVB - MediaTek MT7621 EVB - UPVEL UR-326N4G - Buffalo WZR-AGL300NH Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 07:56:35 +00:00
BLOCKSIZE := 64k
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
DEVICE_TITLE := Airlink AR670W
IMAGE_SIZE := $(ralink_default_fw_size_4M)
ramips: fix AR670W partition alignment mtdsplit_lzma requires that the rootfs be aligned to a block boundary. Pad the kernel partition to make this so. Signed-off-by: Claudio Leite <leitec@gmail.com>
2017-02-05 08:59:45 +00:00
KERNEL := $(KERNEL_DTB) | pad-to $$(BLOCKSIZE)
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
IMAGES += factory.bin
ramips: fix Airlink AR670W factory image Move the mkwrgimg build step to the makefile. It will be required by other boards as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-25 12:03:01 +00:00
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
wrg-header wrgn16a_airlink_ar670w
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
endef
ramips: fix wrong TARGET_DEVICES Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-08 21:51:46 +00:00
TARGET_DEVICES += ar670w
ramips: move different subtarget image generation to separate makefiles to improve maintainability - all subtarget specific defines are in their own files - common defines left in main Makefile - each subtarget makefile idefed with SUBTARGET - all subtargets compile tested - few seems to be broken/unneeded things marked with FIXME Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49104
2016-04-01 07:11:48 +00:00
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
define Device/ar725w
DTS := AR725W
ramips: fix Airlink AR725W device title Gemtek is the ODM but the board was sold by Airlink101. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-04 11:55:16 +00:00
DEVICE_TITLE := Airlink AR725W
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
IMAGES += factory.bin
ramips: fix Airlink AR725W factory image build The factory image can't be bigger than 3328 KByte. If the image is bigger than that, the gemtek-header tool throws an error and breaks the build. Make sure the output file to which the gemtek header should be added exists and wasn't removed during the check-size step because of it size. This will prevent hard errors in case the factory image is to big similar to what is done for sysupgrade images. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-04 10:02:36 +00:00
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size 3328k | \
ramips: add size checks/append metadata where missing Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-26 09:43:34 +00:00
gemtek-header ar725w
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
endef
TARGET_DEVICES += ar725w
ramips: move different subtarget image generation to separate makefiles to improve maintainability - all subtarget specific defines are in their own files - common defines left in main Makefile - each subtarget makefile idefed with SUBTARGET - all subtargets compile tested - few seems to be broken/unneeded things marked with FIXME Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49104
2016-04-01 07:11:48 +00:00
ramips: use generic board detection for D-Link DAP-1522 A1 Use the generic board detection for the D-Link DAP-1522 A1 instead of the target specific one as all recent additions are doing. Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-02-17 08:18:09 +00:00
define Device/dlink_dap-1522-a1
ramips: add support for D-Link DAP-1522 A1 D-Link DAP-1522 is a wireless bridge/access point with 4 LAN ports and a dual-band wireless chipset. Specifications: - Ralink RT2880 - 32 MB of RAM - 4 MB of Flash - 4x 10/100/1000 Mbps Ethernet (RTL8366SR) - 802.11abgn (RT2850) Flash Instructions: 1. Download lede-ramips-rt288x-dap-1522-a1-squashfs-factory.bin 2. Open the web interface and upload the image Signed-off-by: George Hopkins <george-hopkins@null.net>
2017-10-28 12:24:21 +00:00
DTS := DAP-1522-A1
BLOCKSIZE := 64k
IMAGE_SIZE := 3801088
DEVICE_TITLE := D-Link DAP-1522 A1
DEVICE_PACKAGES := kmod-switch-rtl8366s
KERNEL := $(KERNEL_DTB)
IMAGES += factory.bin
IMAGE/factory.bin := \
append-kernel | pad-offset $$$$(BLOCKSIZE) 96 | \
append-rootfs | pad-rootfs -x 96 | \
wrg-header wapnd01_dlink_dap1522 | \
check-size $$$$(IMAGE_SIZE)
endef
ramips: use generic board detection for D-Link DAP-1522 A1 Use the generic board detection for the D-Link DAP-1522 A1 instead of the target specific one as all recent additions are doing. Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-02-17 08:18:09 +00:00
TARGET_DEVICES += dlink_dap-1522-a1
ramips: add support for D-Link DAP-1522 A1 D-Link DAP-1522 is a wireless bridge/access point with 4 LAN ports and a dual-band wireless chipset. Specifications: - Ralink RT2880 - 32 MB of RAM - 4 MB of Flash - 4x 10/100/1000 Mbps Ethernet (RTL8366SR) - 802.11abgn (RT2850) Flash Instructions: 1. Download lede-ramips-rt288x-dap-1522-a1-squashfs-factory.bin 2. Open the web interface and upload the image Signed-off-by: George Hopkins <george-hopkins@null.net>
2017-10-28 12:24:21 +00:00
ramips: fix image validation errors The name from the Device define will be used in the metadata. Due to typos/different spelling, this name might not match the one exported in /lib/ramips.sh. Fix all name mismatches which were found by checking if the name used in the metadata exists in /lib/ramips.sh. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-01 06:37:03 +00:00
define Device/f5d8235-v1
ramips: use patch-dtb for F5D8235 V1 The old DTB method (OWRTDTB) is not recognized by the boot process anymore with 4.9/4.14. This patch reuses KERNEL_DTB to get a valid DTB applied to the kernel image. Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
2018-04-22 17:34:57 +00:00
DTS := F5D8235_V1
image: specify max image size in Kilobyte/Megabyte Use the k and m unit suffix to be consistent with the blocksize. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-04 07:58:02 +00:00
IMAGE_SIZE := 7744k
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
DEVICE_TITLE := Belkin F5D8235 V1
ramips: add support for PCI based OHCI/EHCI support for F5D8235 V1 This router uses an PCI attached NEC EHCI controller to support the single USB port. Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
2016-11-18 14:52:38 +00:00
DEVICE_PACKAGES := kmod-switch-rtl8366s kmod-usb-core kmod-usb-ohci \
kmod-usb-ohci-pci kmod-usb2 kmod-usb2-pci kmod-usb-ledtrig-usbport
ramips: move different subtarget image generation to separate makefiles to improve maintainability - all subtarget specific defines are in their own files - common defines left in main Makefile - each subtarget makefile idefed with SUBTARGET - all subtargets compile tested - few seems to be broken/unneeded things marked with FIXME Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49104
2016-04-01 07:11:48 +00:00
endef
ramips: fix image validation errors The name from the Device define will be used in the metadata. Due to typos/different spelling, this name might not match the one exported in /lib/ramips.sh. Fix all name mismatches which were found by checking if the name used in the metadata exists in /lib/ramips.sh. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-01 06:37:03 +00:00
TARGET_DEVICES += f5d8235-v1
ramips: move different subtarget image generation to separate makefiles to improve maintainability - all subtarget specific defines are in their own files - common defines left in main Makefile - each subtarget makefile idefed with SUBTARGET - all subtargets compile tested - few seems to be broken/unneeded things marked with FIXME Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49104
2016-04-01 07:11:48 +00:00
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
define Device/rt-n15
DTS := RT-N15
ramips: set blocksize for 4MB devices Set the blocksize for devices having only 4MB of flash for ramips devices already using the new image build code. Informations about the used flash chip are gathered from the OpenWrt wiki, wikidevi, forums, OEM bootlogs or the compatible property in the device tree source file. The en25q32b from the AirLive Air3GII does not have 4k support in the kernel. For the following boards no information about the used flash chip could be found and a 64k blocksize is assumed: - Ralink V11ST-FE - Ralink AP-RT3052-V22RW-2X2 - MediaTek MT7628 EVB - MediaTek MT7621 EVB - UPVEL UR-326N4G - Buffalo WZR-AGL300NH Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 07:56:35 +00:00
BLOCKSIZE := 64k
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_TITLE := Asus RT-N15
DEVICE_PACKAGES := kmod-switch-rtl8366s
ramips: move different subtarget image generation to separate makefiles to improve maintainability - all subtarget specific defines are in their own files - common defines left in main Makefile - each subtarget makefile idefed with SUBTARGET - all subtargets compile tested - few seems to be broken/unneeded things marked with FIXME Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49104
2016-04-01 07:11:48 +00:00
endef
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
TARGET_DEVICES += rt-n15
ramips: move different subtarget image generation to separate makefiles to improve maintainability - all subtarget specific defines are in their own files - common defines left in main Makefile - each subtarget makefile idefed with SUBTARGET - all subtargets compile tested - few seems to be broken/unneeded things marked with FIXME Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49104
2016-04-01 07:11:48 +00:00
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
define Device/v11st-fe
DTS := V11STFE
ramips: set blocksize for 4MB devices Set the blocksize for devices having only 4MB of flash for ramips devices already using the new image build code. Informations about the used flash chip are gathered from the OpenWrt wiki, wikidevi, forums, OEM bootlogs or the compatible property in the device tree source file. The en25q32b from the AirLive Air3GII does not have 4k support in the kernel. For the following boards no information about the used flash chip could be found and a 64k blocksize is assumed: - Ralink V11ST-FE - Ralink AP-RT3052-V22RW-2X2 - MediaTek MT7628 EVB - MediaTek MT7621 EVB - UPVEL UR-326N4G - Buffalo WZR-AGL300NH Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 07:56:35 +00:00
BLOCKSIZE := 64k
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_TITLE := Ralink V11ST-FE
endef
TARGET_DEVICES += v11st-fe
ramips: move different subtarget image generation to separate makefiles to improve maintainability - all subtarget specific defines are in their own files - common defines left in main Makefile - each subtarget makefile idefed with SUBTARGET - all subtargets compile tested - few seems to be broken/unneeded things marked with FIXME Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49104
2016-04-01 07:11:48 +00:00
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
define Device/wli-tx4-ag300n
DTS := WLI-TX4-AG300N
ramips: set blocksize for 4MB devices Set the blocksize for devices having only 4MB of flash for ramips devices already using the new image build code. Informations about the used flash chip are gathered from the OpenWrt wiki, wikidevi, forums, OEM bootlogs or the compatible property in the device tree source file. The en25q32b from the AirLive Air3GII does not have 4k support in the kernel. For the following boards no information about the used flash chip could be found and a 64k blocksize is assumed: - Ralink V11ST-FE - Ralink AP-RT3052-V22RW-2X2 - MediaTek MT7628 EVB - MediaTek MT7621 EVB - UPVEL UR-326N4G - Buffalo WZR-AGL300NH Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 07:56:35 +00:00
BLOCKSIZE := 64k
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_TITLE := Buffalo WLI-TX4-AG300N
ramips: add ip17xx support to WLI-TX4-AG300N ramips/rt288x WLI-TX4-AG300N was missing support for its 100Mbit switch which should be included by default. Signed-off-by: Yo Abe <abe.geel@gmail.com> [Jo-Philipp Wich: picked from OpenWrt PR#359, rewrap commit msg, fix Sob] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-26 13:28:09 +00:00
DEVICE_PACKAGES := kmod-switch-ip17xx
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
endef
TARGET_DEVICES += wli-tx4-ag300n
define Device/wzr-agl300nh
DTS := WZR-AGL300NH
ramips: set blocksize for 4MB devices Set the blocksize for devices having only 4MB of flash for ramips devices already using the new image build code. Informations about the used flash chip are gathered from the OpenWrt wiki, wikidevi, forums, OEM bootlogs or the compatible property in the device tree source file. The en25q32b from the AirLive Air3GII does not have 4k support in the kernel. For the following boards no information about the used flash chip could be found and a 64k blocksize is assumed: - Ralink V11ST-FE - Ralink AP-RT3052-V22RW-2X2 - MediaTek MT7628 EVB - MediaTek MT7621 EVB - UPVEL UR-326N4G - Buffalo WZR-AGL300NH Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 07:56:35 +00:00
BLOCKSIZE := 64k
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
IMAGE_SIZE := $(ralink_default_fw_size_4M)
DEVICE_TITLE := Buffalo WZR-AGL300NH
DEVICE_PACKAGES := kmod-switch-rtl8366s
ramips: move different subtarget image generation to separate makefiles to improve maintainability - all subtarget specific defines are in their own files - common defines left in main Makefile - each subtarget makefile idefed with SUBTARGET - all subtargets compile tested - few seems to be broken/unneeded things marked with FIXME Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49104
2016-04-01 07:11:48 +00:00
endef
ramips: convert rt2880 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 22:56:03 +00:00
TARGET_DEVICES += wzr-agl300nh
Reference in a new issue Copy permalink