openwrtv3/target/linux/mvebu/patches-3.10/0197-xhci-fix-dma-mask-setup-in-xhci.c.patch

From 5cb802766e9cdc9a56e8ce8e4686692ebbcfb5cc Mon Sep 17 00:00:00 2001
From: Xenia Ragiadakou <burzalodowa@gmail.com>
Date: Mon, 23 Dec 2013 16:59:02 +0100
Subject: [PATCH 197/203] xhci: fix dma mask setup in xhci.c

The function dma_set_mask() tests internally whether the dma_mask pointer
for the device is initialized and fails if the dma_mask pointer is NULL.
On pci platforms, the device dma_mask pointer is initialized, when pci
devices are enumerated, to point to the pci_dev->dma_mask which is 0xffffffff.
However, for non-pci platforms, the dma_mask pointer may not be initialized
and in that case dma_set_mask() will fail.

This patch initializes the dma_mask and the coherent_dma_mask to 32bits
in xhci_plat_probe(), before the call to usb_create_hcd() that sets the
"uses_dma" flag for the usb bus and the call to usb_add_hcd() that creates
coherent dma pools for the usb hcd.

Moreover, a call to dma_set_mask() does not set the device coherent_dma_mask.
Since the xhci-hcd driver calls dma_alloc_coherent() and dma_pool_alloc()
to allocate consistent DMA memory blocks, the coherent DMA address mask
has to be set explicitly.

This patch sets the coherent_dma_mask to 64bits in xhci_gen_setup() when
the xHC is capable for 64-bit DMA addressing.

If dma_set_mask() succeeds, for a given bitmask, it is guaranteed that
the given bitmask is also supported for consistent DMA mappings.

Other changes introduced in this patch are:

- The return value of dma_set_mask() is checked to ensure that the required
  dma bitmask conforms with the host system's addressing capabilities.

- The dma_mask setup code for the non-primary hcd was removed since both
  primary and non-primary hcd refer to the same generic device whose
  dma_mask and coherent_dma_mask are already set during the setup of
  the primary hcd.

- The code for reading the HCCPARAMS register to find out the addressing
  capabilities of xHC was removed since its value is already cached in
  xhci->hccparams.

- hcd->self.controller was replaced with the dev variable since it is
  already available.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>

Conflicts:
	drivers/usb/host/xhci-plat.c
---
 drivers/usb/host/xhci-plat.c | 10 ++++++++++
 drivers/usb/host/xhci.c      | 19 +++++--------------
 2 files changed, 15 insertions(+), 14 deletions(-)

--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/dma-mapping.h>
 
 #include "xhci.h"
 
@@ -105,6 +106,15 @@ static int xhci_plat_probe(struct platfo
 	if (!res)
 		return -ENODEV;
 
+	/* Initialize dma_mask and coherent_dma_mask to 32-bits */
+	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+	else
+		dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+
 	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
 	if (!hcd)
 		return -ENOMEM;
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4657,7 +4657,6 @@ int xhci_gen_setup(struct usb_hcd *hcd,
 	struct xhci_hcd		*xhci;
 	struct device		*dev = hcd->self.controller;
 	int			retval;
-	u32			temp;
 
 	/* Accept arbitrarily long scatter-gather lists */
 	hcd->self.sg_tablesize = ~0;
@@ -4685,14 +4684,6 @@ int xhci_gen_setup(struct usb_hcd *hcd,
 		/* xHCI private pointer was set in xhci_pci_probe for the second
 		 * registered roothub.
 		 */
-		xhci = hcd_to_xhci(hcd);
-		temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
-		if (HCC_64BIT_ADDR(temp)) {
-			xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
-			dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
-		} else {
-			dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
-		}
 		return 0;
 	}
 
@@ -4731,12 +4722,12 @@ int xhci_gen_setup(struct usb_hcd *hcd,
 		goto error;
 	xhci_dbg(xhci, "Reset complete\n");
 
-	temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
-	if (HCC_64BIT_ADDR(temp)) {
+	/* Set dma_mask and coherent_dma_mask to 64-bits,
+	 * if xHC supports 64-bit addressing */
+	if (HCC_64BIT_ADDR(xhci->hcc_params) &&
+			!dma_set_mask(dev, DMA_BIT_MASK(64))) {
 		xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
-		dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
-	} else {
-		dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
+		dma_set_coherent_mask(dev, DMA_BIT_MASK(64));
 	}
 
 	xhci_dbg(xhci, "Calling HCD init\n");