openwrtv3/target/linux/lantiq/patches-4.9/0092-spi-lantiq-ssc-add-LTQ_-prefix-to-defines.patch

724 lines
26 KiB
Diff
Raw Normal View History

From 1aa83e0a2821cd7f4e8f3ddb367859f52e468bf1 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Mon, 27 Feb 2017 23:21:25 +0100
Subject: spi: lantiq-ssc: add LTQ_ prefix to defines
The blackfin architecture has a SPI_STAT define which conflicts with
the define from the spi-lantiq-ssc driver in compile test mode. Fix
this by adding a prefix in front of every define.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/spi/spi-lantiq-ssc.c | 437 ++++++++++++++++++++++---------------------
1 file changed, 222 insertions(+), 215 deletions(-)
--- a/drivers/spi/spi-lantiq-ssc.c
+++ b/drivers/spi/spi-lantiq-ssc.c
@@ -26,136 +26,140 @@
#include <lantiq_soc.h>
#endif
-#define SPI_RX_IRQ_NAME "spi_rx"
-#define SPI_TX_IRQ_NAME "spi_tx"
-#define SPI_ERR_IRQ_NAME "spi_err"
-#define SPI_FRM_IRQ_NAME "spi_frm"
-
-#define SPI_CLC 0x00
-#define SPI_PISEL 0x04
-#define SPI_ID 0x08
-#define SPI_CON 0x10
-#define SPI_STAT 0x14
-#define SPI_WHBSTATE 0x18
-#define SPI_TB 0x20
-#define SPI_RB 0x24
-#define SPI_RXFCON 0x30
-#define SPI_TXFCON 0x34
-#define SPI_FSTAT 0x38
-#define SPI_BRT 0x40
-#define SPI_BRSTAT 0x44
-#define SPI_SFCON 0x60
-#define SPI_SFSTAT 0x64
-#define SPI_GPOCON 0x70
-#define SPI_GPOSTAT 0x74
-#define SPI_FPGO 0x78
-#define SPI_RXREQ 0x80
-#define SPI_RXCNT 0x84
-#define SPI_DMACON 0xec
-#define SPI_IRNEN 0xf4
-#define SPI_IRNICR 0xf8
-#define SPI_IRNCR 0xfc
-
-#define SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */
-#define SPI_CLC_SMC_M (0xFF << SPI_CLC_SMC_S)
-#define SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */
-#define SPI_CLC_RMC_M (0xFF << SPI_CLC_RMC_S)
-#define SPI_CLC_DISS BIT(1) /* Disable status bit */
-#define SPI_CLC_DISR BIT(0) /* Disable request bit */
-
-#define SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */
-#define SPI_ID_TXFS_M (0x3F << SPI_ID_TXFS_S)
-#define SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */
-#define SPI_ID_RXFS_M (0x3F << SPI_ID_RXFS_S)
-#define SPI_ID_MOD_S 8 /* Module ID */
-#define SPI_ID_MOD_M (0xff << SPI_ID_MOD_S)
-#define SPI_ID_CFG_S 5 /* DMA interface support */
-#define SPI_ID_CFG_M (1 << SPI_ID_CFG_S)
-#define SPI_ID_REV_M 0x1F /* Hardware revision number */
-
-#define SPI_CON_BM_S 16 /* Data width selection */
-#define SPI_CON_BM_M (0x1F << SPI_CON_BM_S)
-#define SPI_CON_EM BIT(24) /* Echo mode */
-#define SPI_CON_IDLE BIT(23) /* Idle bit value */
-#define SPI_CON_ENBV BIT(22) /* Enable byte valid control */
-#define SPI_CON_RUEN BIT(12) /* Receive underflow error enable */
-#define SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */
-#define SPI_CON_AEN BIT(10) /* Abort error enable */
-#define SPI_CON_REN BIT(9) /* Receive overflow error enable */
-#define SPI_CON_TEN BIT(8) /* Transmit overflow error enable */
-#define SPI_CON_LB BIT(7) /* Loopback control */
-#define SPI_CON_PO BIT(6) /* Clock polarity control */
-#define SPI_CON_PH BIT(5) /* Clock phase control */
-#define SPI_CON_HB BIT(4) /* Heading control */
-#define SPI_CON_RXOFF BIT(1) /* Switch receiver off */
-#define SPI_CON_TXOFF BIT(0) /* Switch transmitter off */
-
-#define SPI_STAT_RXBV_S 28
-#define SPI_STAT_RXBV_M (0x7 << SPI_STAT_RXBV_S)
-#define SPI_STAT_BSY BIT(13) /* Busy flag */
-#define SPI_STAT_RUE BIT(12) /* Receive underflow error flag */
-#define SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */
-#define SPI_STAT_AE BIT(10) /* Abort error flag */
-#define SPI_STAT_RE BIT(9) /* Receive error flag */
-#define SPI_STAT_TE BIT(8) /* Transmit error flag */
-#define SPI_STAT_ME BIT(7) /* Mode error flag */
-#define SPI_STAT_MS BIT(1) /* Master/slave select bit */
-#define SPI_STAT_EN BIT(0) /* Enable bit */
-#define SPI_STAT_ERRORS (SPI_STAT_ME | SPI_STAT_TE | SPI_STAT_RE | \
- SPI_STAT_AE | SPI_STAT_TUE | SPI_STAT_RUE)
-
-#define SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */
-#define SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */
-#define SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */
-#define SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */
-#define SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */
-#define SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */
-#define SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */
-#define SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */
-#define SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */
-#define SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */
-#define SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */
-#define SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */
-#define SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */
-#define SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */
-#define SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */
-#define SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */
-#define SPI_WHBSTATE_CLR_ERRORS (SPI_WHBSTATE_CLRRUE | SPI_WHBSTATE_CLRME | \
- SPI_WHBSTATE_CLRTE | SPI_WHBSTATE_CLRRE | \
- SPI_WHBSTATE_CLRAE | SPI_WHBSTATE_CLRTUE)
-
-#define SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */
-#define SPI_RXFCON_RXFITL_M (0x3F << SPI_RXFCON_RXFITL_S)
-#define SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */
-#define SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */
-
-#define SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */
-#define SPI_TXFCON_TXFITL_M (0x3F << SPI_TXFCON_TXFITL_S)
-#define SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */
-#define SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */
-
-#define SPI_FSTAT_RXFFL_S 0
-#define SPI_FSTAT_RXFFL_M (0x3f << SPI_FSTAT_RXFFL_S)
-#define SPI_FSTAT_TXFFL_S 8
-#define SPI_FSTAT_TXFFL_M (0x3f << SPI_FSTAT_TXFFL_S)
-
-#define SPI_GPOCON_ISCSBN_S 8
-#define SPI_GPOCON_INVOUTN_S 0
-
-#define SPI_FGPO_SETOUTN_S 8
-#define SPI_FGPO_CLROUTN_S 0
-
-#define SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */
-#define SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */
-
-#define SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */
-#define SPI_IRNEN_F BIT(3) /* Frame end interrupt request */
-#define SPI_IRNEN_E BIT(2) /* Error end interrupt request */
-#define SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */
-#define SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */
-#define SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */
-#define SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */
-#define SPI_IRNEN_ALL 0x1F
+#define LTQ_SPI_RX_IRQ_NAME "spi_rx"
+#define LTQ_SPI_TX_IRQ_NAME "spi_tx"
+#define LTQ_SPI_ERR_IRQ_NAME "spi_err"
+#define LTQ_SPI_FRM_IRQ_NAME "spi_frm"
+
+#define LTQ_SPI_CLC 0x00
+#define LTQ_SPI_PISEL 0x04
+#define LTQ_SPI_ID 0x08
+#define LTQ_SPI_CON 0x10
+#define LTQ_SPI_STAT 0x14
+#define LTQ_SPI_WHBSTATE 0x18
+#define LTQ_SPI_TB 0x20
+#define LTQ_SPI_RB 0x24
+#define LTQ_SPI_RXFCON 0x30
+#define LTQ_SPI_TXFCON 0x34
+#define LTQ_SPI_FSTAT 0x38
+#define LTQ_SPI_BRT 0x40
+#define LTQ_SPI_BRSTAT 0x44
+#define LTQ_SPI_SFCON 0x60
+#define LTQ_SPI_SFSTAT 0x64
+#define LTQ_SPI_GPOCON 0x70
+#define LTQ_SPI_GPOSTAT 0x74
+#define LTQ_SPI_FPGO 0x78
+#define LTQ_SPI_RXREQ 0x80
+#define LTQ_SPI_RXCNT 0x84
+#define LTQ_SPI_DMACON 0xec
+#define LTQ_SPI_IRNEN 0xf4
+#define LTQ_SPI_IRNICR 0xf8
+#define LTQ_SPI_IRNCR 0xfc
+
+#define LTQ_SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */
+#define LTQ_SPI_CLC_SMC_M (0xFF << LTQ_SPI_CLC_SMC_S)
+#define LTQ_SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */
+#define LTQ_SPI_CLC_RMC_M (0xFF << LTQ_SPI_CLC_RMC_S)
+#define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */
+#define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */
+
+#define LTQ_SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */
+#define LTQ_SPI_ID_TXFS_M (0x3F << LTQ_SPI_ID_TXFS_S)
+#define LTQ_SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */
+#define LTQ_SPI_ID_RXFS_M (0x3F << LTQ_SPI_ID_RXFS_S)
+#define LTQ_SPI_ID_MOD_S 8 /* Module ID */
+#define LTQ_SPI_ID_MOD_M (0xff << LTQ_SPI_ID_MOD_S)
+#define LTQ_SPI_ID_CFG_S 5 /* DMA interface support */
+#define LTQ_SPI_ID_CFG_M (1 << LTQ_SPI_ID_CFG_S)
+#define LTQ_SPI_ID_REV_M 0x1F /* Hardware revision number */
+
+#define LTQ_SPI_CON_BM_S 16 /* Data width selection */
+#define LTQ_SPI_CON_BM_M (0x1F << LTQ_SPI_CON_BM_S)
+#define LTQ_SPI_CON_EM BIT(24) /* Echo mode */
+#define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */
+#define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */
+#define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */
+#define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */
+#define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */
+#define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */
+#define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */
+#define LTQ_SPI_CON_LB BIT(7) /* Loopback control */
+#define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */
+#define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */
+#define LTQ_SPI_CON_HB BIT(4) /* Heading control */
+#define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */
+#define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */
+
+#define LTQ_SPI_STAT_RXBV_S 28
+#define LTQ_SPI_STAT_RXBV_M (0x7 << LTQ_SPI_STAT_RXBV_S)
+#define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */
+#define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */
+#define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */
+#define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */
+#define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */
+#define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */
+#define LTQ_SPI_STAT_ME BIT(7) /* Mode error flag */
+#define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */
+#define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */
+#define LTQ_SPI_STAT_ERRORS (LTQ_SPI_STAT_ME | LTQ_SPI_STAT_TE | \
+ LTQ_SPI_STAT_RE | LTQ_SPI_STAT_AE | \
+ LTQ_SPI_STAT_TUE | LTQ_SPI_STAT_RUE)
+
+#define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */
+#define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */
+#define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */
+#define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */
+#define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */
+#define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */
+#define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */
+#define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */
+#define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */
+#define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */
+#define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */
+#define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */
+#define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */
+#define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */
+#define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */
+#define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */
+#define LTQ_SPI_WHBSTATE_CLR_ERRORS (LTQ_SPI_WHBSTATE_CLRRUE | \
+ LTQ_SPI_WHBSTATE_CLRME | \
+ LTQ_SPI_WHBSTATE_CLRTE | \
+ LTQ_SPI_WHBSTATE_CLRRE | \
+ LTQ_SPI_WHBSTATE_CLRAE | \
+ LTQ_SPI_WHBSTATE_CLRTUE)
+
+#define LTQ_SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */
+#define LTQ_SPI_RXFCON_RXFITL_M (0x3F << LTQ_SPI_RXFCON_RXFITL_S)
+#define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */
+#define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */
+
+#define LTQ_SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */
+#define LTQ_SPI_TXFCON_TXFITL_M (0x3F << LTQ_SPI_TXFCON_TXFITL_S)
+#define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */
+#define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */
+
+#define LTQ_SPI_FSTAT_RXFFL_S 0
+#define LTQ_SPI_FSTAT_RXFFL_M (0x3f << LTQ_SPI_FSTAT_RXFFL_S)
+#define LTQ_SPI_FSTAT_TXFFL_S 8
+#define LTQ_SPI_FSTAT_TXFFL_M (0x3f << LTQ_SPI_FSTAT_TXFFL_S)
+
+#define LTQ_SPI_GPOCON_ISCSBN_S 8
+#define LTQ_SPI_GPOCON_INVOUTN_S 0
+
+#define LTQ_SPI_FGPO_SETOUTN_S 8
+#define LTQ_SPI_FGPO_CLROUTN_S 0
+
+#define LTQ_SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */
+#define LTQ_SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */
+
+#define LTQ_SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */
+#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */
+#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */
+#define LTQ_SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */
+#define LTQ_SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */
+#define LTQ_SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */
+#define LTQ_SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */
+#define LTQ_SPI_IRNEN_ALL 0x1F
struct lantiq_ssc_hwcfg {
unsigned int irnen_r;
@@ -208,16 +212,16 @@ static void lantiq_ssc_maskl(const struc
static unsigned int tx_fifo_level(const struct lantiq_ssc_spi *spi)
{
- u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT);
+ u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT);
- return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S;
+ return (fstat & LTQ_SPI_FSTAT_TXFFL_M) >> LTQ_SPI_FSTAT_TXFFL_S;
}
static unsigned int rx_fifo_level(const struct lantiq_ssc_spi *spi)
{
- u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT);
+ u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT);
- return fstat & SPI_FSTAT_RXFFL_M;
+ return fstat & LTQ_SPI_FSTAT_RXFFL_M;
}
static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi)
@@ -227,38 +231,38 @@ static unsigned int tx_fifo_free(const s
static void rx_fifo_reset(const struct lantiq_ssc_spi *spi)
{
- u32 val = spi->rx_fifo_size << SPI_RXFCON_RXFITL_S;
+ u32 val = spi->rx_fifo_size << LTQ_SPI_RXFCON_RXFITL_S;
- val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU;
- lantiq_ssc_writel(spi, val, SPI_RXFCON);
+ val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU;
+ lantiq_ssc_writel(spi, val, LTQ_SPI_RXFCON);
}
static void tx_fifo_reset(const struct lantiq_ssc_spi *spi)
{
- u32 val = 1 << SPI_TXFCON_TXFITL_S;
+ u32 val = 1 << LTQ_SPI_TXFCON_TXFITL_S;
- val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU;
- lantiq_ssc_writel(spi, val, SPI_TXFCON);
+ val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU;
+ lantiq_ssc_writel(spi, val, LTQ_SPI_TXFCON);
}
static void rx_fifo_flush(const struct lantiq_ssc_spi *spi)
{
- lantiq_ssc_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON);
+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON);
}
static void tx_fifo_flush(const struct lantiq_ssc_spi *spi)
{
- lantiq_ssc_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON);
+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON);
}
static void hw_enter_config_mode(const struct lantiq_ssc_spi *spi)
{
- lantiq_ssc_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE);
+ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE);
}
static void hw_enter_active_mode(const struct lantiq_ssc_spi *spi)
{
- lantiq_ssc_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE);
+ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE);
}
static void hw_setup_speed_hz(const struct lantiq_ssc_spi *spi,
@@ -287,7 +291,7 @@ static void hw_setup_speed_hz(const stru
dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n",
spi_clk, max_speed_hz, brt);
- lantiq_ssc_writel(spi, brt, SPI_BRT);
+ lantiq_ssc_writel(spi, brt, LTQ_SPI_BRT);
}
static void hw_setup_bits_per_word(const struct lantiq_ssc_spi *spi,
@@ -296,9 +300,9 @@ static void hw_setup_bits_per_word(const
u32 bm;
/* CON.BM value = bits_per_word - 1 */
- bm = (bits_per_word - 1) << SPI_CON_BM_S;
+ bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_S;
- lantiq_ssc_maskl(spi, SPI_CON_BM_M, bm, SPI_CON);
+ lantiq_ssc_maskl(spi, LTQ_SPI_CON_BM_M, bm, LTQ_SPI_CON);
}
static void hw_setup_clock_mode(const struct lantiq_ssc_spi *spi,
@@ -315,28 +319,28 @@ static void hw_setup_clock_mode(const st
* 3 1 1 1 0
*/
if (mode & SPI_CPHA)
- con_clr |= SPI_CON_PH;
+ con_clr |= LTQ_SPI_CON_PH;
else
- con_set |= SPI_CON_PH;
+ con_set |= LTQ_SPI_CON_PH;
if (mode & SPI_CPOL)
- con_set |= SPI_CON_PO | SPI_CON_IDLE;
+ con_set |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE;
else
- con_clr |= SPI_CON_PO | SPI_CON_IDLE;
+ con_clr |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE;
/* Set heading control */
if (mode & SPI_LSB_FIRST)
- con_clr |= SPI_CON_HB;
+ con_clr |= LTQ_SPI_CON_HB;
else
- con_set |= SPI_CON_HB;
+ con_set |= LTQ_SPI_CON_HB;
/* Set loopback mode */
if (mode & SPI_LOOP)
- con_set |= SPI_CON_LB;
+ con_set |= LTQ_SPI_CON_LB;
else
- con_clr |= SPI_CON_LB;
+ con_clr |= LTQ_SPI_CON_LB;
- lantiq_ssc_maskl(spi, con_clr, con_set, SPI_CON);
+ lantiq_ssc_maskl(spi, con_clr, con_set, LTQ_SPI_CON);
}
static void lantiq_ssc_hw_init(const struct lantiq_ssc_spi *spi)
@@ -347,37 +351,39 @@ static void lantiq_ssc_hw_init(const str
* Set clock divider for run mode to 1 to
* run at same frequency as FPI bus
*/
- lantiq_ssc_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC);
+ lantiq_ssc_writel(spi, 1 << LTQ_SPI_CLC_RMC_S, LTQ_SPI_CLC);
/* Put controller into config mode */
hw_enter_config_mode(spi);
/* Clear error flags */
- lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
/* Enable error checking, disable TX/RX */
- lantiq_ssc_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN |
- SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
+ lantiq_ssc_writel(spi, LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN |
+ LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN | LTQ_SPI_CON_TXOFF |
+ LTQ_SPI_CON_RXOFF, LTQ_SPI_CON);
/* Setup default SPI mode */
hw_setup_bits_per_word(spi, spi->bits_per_word);
hw_setup_clock_mode(spi, SPI_MODE_0);
/* Enable master mode and clear error flags */
- lantiq_ssc_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS,
- SPI_WHBSTATE);
+ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_SETMS |
+ LTQ_SPI_WHBSTATE_CLR_ERRORS,
+ LTQ_SPI_WHBSTATE);
/* Reset GPIO/CS registers */
- lantiq_ssc_writel(spi, 0, SPI_GPOCON);
- lantiq_ssc_writel(spi, 0xFF00, SPI_FPGO);
+ lantiq_ssc_writel(spi, 0, LTQ_SPI_GPOCON);
+ lantiq_ssc_writel(spi, 0xFF00, LTQ_SPI_FPGO);
/* Enable and flush FIFOs */
rx_fifo_reset(spi);
tx_fifo_reset(spi);
/* Enable interrupts */
- lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E,
- SPI_IRNEN);
+ lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r |
+ LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN);
}
static int lantiq_ssc_setup(struct spi_device *spidev)
@@ -400,13 +406,13 @@ static int lantiq_ssc_setup(struct spi_d
}
/* set GPO pin to CS mode */
- gpocon = 1 << ((cs - spi->base_cs) + SPI_GPOCON_ISCSBN_S);
+ gpocon = 1 << ((cs - spi->base_cs) + LTQ_SPI_GPOCON_ISCSBN_S);
/* invert GPO pin */
if (spidev->mode & SPI_CS_HIGH)
gpocon |= 1 << (cs - spi->base_cs);
- lantiq_ssc_maskl(spi, 0, gpocon, SPI_GPOCON);
+ lantiq_ssc_maskl(spi, 0, gpocon, LTQ_SPI_GPOCON);
return 0;
}
@@ -442,18 +448,18 @@ static void hw_setup_transfer(struct lan
}
/* Configure transmitter and receiver */
- con = lantiq_ssc_readl(spi, SPI_CON);
+ con = lantiq_ssc_readl(spi, LTQ_SPI_CON);
if (t->tx_buf)
- con &= ~SPI_CON_TXOFF;
+ con &= ~LTQ_SPI_CON_TXOFF;
else
- con |= SPI_CON_TXOFF;
+ con |= LTQ_SPI_CON_TXOFF;
if (t->rx_buf)
- con &= ~SPI_CON_RXOFF;
+ con &= ~LTQ_SPI_CON_RXOFF;
else
- con |= SPI_CON_RXOFF;
+ con |= LTQ_SPI_CON_RXOFF;
- lantiq_ssc_writel(spi, con, SPI_CON);
+ lantiq_ssc_writel(spi, con, LTQ_SPI_CON);
}
static int lantiq_ssc_unprepare_message(struct spi_master *master,
@@ -464,7 +470,8 @@ static int lantiq_ssc_unprepare_message(
flush_workqueue(spi->wq);
/* Disable transmitter and receiver while idle */
- lantiq_ssc_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON);
+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF,
+ LTQ_SPI_CON);
return 0;
}
@@ -503,7 +510,7 @@ static void tx_fifo_write(struct lantiq_
break;
}
- lantiq_ssc_writel(spi, data, SPI_TB);
+ lantiq_ssc_writel(spi, data, LTQ_SPI_TB);
tx_free--;
}
}
@@ -517,7 +524,7 @@ static void rx_fifo_read_full_duplex(str
unsigned int rx_fill = rx_fifo_level(spi);
while (rx_fill) {
- data = lantiq_ssc_readl(spi, SPI_RB);
+ data = lantiq_ssc_readl(spi, LTQ_SPI_RB);
switch (spi->bits_per_word) {
case 2 ... 8:
@@ -563,9 +570,9 @@ static void rx_fifo_read_half_duplex(str
*/
while (rx_fill) {
if (spi->rx_todo < 4) {
- rxbv = (lantiq_ssc_readl(spi, SPI_STAT) &
- SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S;
- data = lantiq_ssc_readl(spi, SPI_RB);
+ rxbv = (lantiq_ssc_readl(spi, LTQ_SPI_STAT) &
+ LTQ_SPI_STAT_RXBV_M) >> LTQ_SPI_STAT_RXBV_S;
+ data = lantiq_ssc_readl(spi, LTQ_SPI_RB);
shift = (rxbv - 1) * 8;
rx8 = spi->rx;
@@ -578,7 +585,7 @@ static void rx_fifo_read_half_duplex(str
spi->rx++;
}
} else {
- data = lantiq_ssc_readl(spi, SPI_RB);
+ data = lantiq_ssc_readl(spi, LTQ_SPI_RB);
rx32 = (u32 *) spi->rx;
*rx32++ = data;
@@ -603,7 +610,7 @@ static void rx_request(struct lantiq_ssc
if (rxreq > rxreq_max)
rxreq = rxreq_max;
- lantiq_ssc_writel(spi, rxreq, SPI_RXREQ);
+ lantiq_ssc_writel(spi, rxreq, LTQ_SPI_RXREQ);
}
static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data)
@@ -642,26 +649,26 @@ completed:
static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data)
{
struct lantiq_ssc_spi *spi = data;
- u32 stat = lantiq_ssc_readl(spi, SPI_STAT);
+ u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT);
- if (!(stat & SPI_STAT_ERRORS))
+ if (!(stat & LTQ_SPI_STAT_ERRORS))
return IRQ_NONE;
- if (stat & SPI_STAT_RUE)
+ if (stat & LTQ_SPI_STAT_RUE)
dev_err(spi->dev, "receive underflow error\n");
- if (stat & SPI_STAT_TUE)
+ if (stat & LTQ_SPI_STAT_TUE)
dev_err(spi->dev, "transmit underflow error\n");
- if (stat & SPI_STAT_AE)
+ if (stat & LTQ_SPI_STAT_AE)
dev_err(spi->dev, "abort error\n");
- if (stat & SPI_STAT_RE)
+ if (stat & LTQ_SPI_STAT_RE)
dev_err(spi->dev, "receive overflow error\n");
- if (stat & SPI_STAT_TE)
+ if (stat & LTQ_SPI_STAT_TE)
dev_err(spi->dev, "transmit overflow error\n");
- if (stat & SPI_STAT_ME)
+ if (stat & LTQ_SPI_STAT_ME)
dev_err(spi->dev, "mode error\n");
/* Clear error flags */
- lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE);
+ lantiq_ssc_maskl(spi, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
/* set bad status so it can be retried */
if (spi->master->cur_msg)
@@ -721,9 +728,9 @@ static void lantiq_ssc_bussy_work(struct
end = jiffies + msecs_to_jiffies(timeout);
do {
- u32 stat = lantiq_ssc_readl(spi, SPI_STAT);
+ u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT);
- if (!(stat & SPI_STAT_BSY)) {
+ if (!(stat & LTQ_SPI_STAT_BSY)) {
spi_finalize_current_transfer(spi->master);
return;
}
@@ -755,9 +762,9 @@ static void lantiq_ssc_set_cs(struct spi
if (!!(spidev->mode & SPI_CS_HIGH) == enable)
fgpo = (1 << (cs - spi->base_cs));
else
- fgpo = (1 << (cs - spi->base_cs + SPI_FGPO_SETOUTN_S));
+ fgpo = (1 << (cs - spi->base_cs + LTQ_SPI_FGPO_SETOUTN_S));
- lantiq_ssc_writel(spi, fgpo, SPI_FPGO);
+ lantiq_ssc_writel(spi, fgpo, LTQ_SPI_FPGO);
}
static int lantiq_ssc_transfer_one(struct spi_master *master,
@@ -772,13 +779,13 @@ static int lantiq_ssc_transfer_one(struc
}
static const struct lantiq_ssc_hwcfg lantiq_ssc_xway = {
- .irnen_r = SPI_IRNEN_R_XWAY,
- .irnen_t = SPI_IRNEN_T_XWAY,
+ .irnen_r = LTQ_SPI_IRNEN_R_XWAY,
+ .irnen_t = LTQ_SPI_IRNEN_T_XWAY,
};
static const struct lantiq_ssc_hwcfg lantiq_ssc_xrx = {
- .irnen_r = SPI_IRNEN_R_XRX,
- .irnen_t = SPI_IRNEN_T_XRX,
+ .irnen_r = LTQ_SPI_IRNEN_R_XRX,
+ .irnen_t = LTQ_SPI_IRNEN_T_XRX,
};
static const struct of_device_id lantiq_ssc_match[] = {
@@ -814,21 +821,21 @@ static int lantiq_ssc_probe(struct platf
return -ENXIO;
}
- rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME);
+ rx_irq = platform_get_irq_byname(pdev, LTQ_SPI_RX_IRQ_NAME);
if (rx_irq < 0) {
- dev_err(dev, "failed to get %s\n", SPI_RX_IRQ_NAME);
+ dev_err(dev, "failed to get %s\n", LTQ_SPI_RX_IRQ_NAME);
return -ENXIO;
}
- tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME);
+ tx_irq = platform_get_irq_byname(pdev, LTQ_SPI_TX_IRQ_NAME);
if (tx_irq < 0) {
- dev_err(dev, "failed to get %s\n", SPI_TX_IRQ_NAME);
+ dev_err(dev, "failed to get %s\n", LTQ_SPI_TX_IRQ_NAME);
return -ENXIO;
}
- err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME);
+ err_irq = platform_get_irq_byname(pdev, LTQ_SPI_ERR_IRQ_NAME);
if (err_irq < 0) {
- dev_err(dev, "failed to get %s\n", SPI_ERR_IRQ_NAME);
+ dev_err(dev, "failed to get %s\n", LTQ_SPI_ERR_IRQ_NAME);
return -ENXIO;
}
@@ -849,17 +856,17 @@ static int lantiq_ssc_probe(struct platf
}
err = devm_request_irq(dev, rx_irq, lantiq_ssc_xmit_interrupt,
- 0, SPI_RX_IRQ_NAME, spi);
+ 0, LTQ_SPI_RX_IRQ_NAME, spi);
if (err)
goto err_master_put;
err = devm_request_irq(dev, tx_irq, lantiq_ssc_xmit_interrupt,
- 0, SPI_TX_IRQ_NAME, spi);
+ 0, LTQ_SPI_TX_IRQ_NAME, spi);
if (err)
goto err_master_put;
err = devm_request_irq(dev, err_irq, lantiq_ssc_err_interrupt,
- 0, SPI_ERR_IRQ_NAME, spi);
+ 0, LTQ_SPI_ERR_IRQ_NAME, spi);
if (err)
goto err_master_put;
@@ -916,11 +923,11 @@ static int lantiq_ssc_probe(struct platf
}
INIT_WORK(&spi->work, lantiq_ssc_bussy_work);
- id = lantiq_ssc_readl(spi, SPI_ID);
- spi->tx_fifo_size = (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S;
- spi->rx_fifo_size = (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S;
- supports_dma = (id & SPI_ID_CFG_M) >> SPI_ID_CFG_S;
- revision = id & SPI_ID_REV_M;
+ id = lantiq_ssc_readl(spi, LTQ_SPI_ID);
+ spi->tx_fifo_size = (id & LTQ_SPI_ID_TXFS_M) >> LTQ_SPI_ID_TXFS_S;
+ spi->rx_fifo_size = (id & LTQ_SPI_ID_RXFS_M) >> LTQ_SPI_ID_RXFS_S;
+ supports_dma = (id & LTQ_SPI_ID_CFG_M) >> LTQ_SPI_ID_CFG_S;
+ revision = id & LTQ_SPI_ID_REV_M;
lantiq_ssc_hw_init(spi);
@@ -952,8 +959,8 @@ static int lantiq_ssc_remove(struct plat
{
struct lantiq_ssc_spi *spi = platform_get_drvdata(pdev);
- lantiq_ssc_writel(spi, 0, SPI_IRNEN);
- lantiq_ssc_writel(spi, 0, SPI_CLC);
+ lantiq_ssc_writel(spi, 0, LTQ_SPI_IRNEN);
+ lantiq_ssc_writel(spi, 0, LTQ_SPI_CLC);
rx_fifo_flush(spi);
tx_fifo_flush(spi);
hw_enter_config_mode(spi);