openwrtv3/target/linux/generic/patches-3.9/025-bcma_backport.patch

--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
@@ -104,7 +104,13 @@ void bcma_core_pll_ctl(struct bcma_devic
 		if (i)
 			bcma_err(core->bus, "PLL enable timeout\n");
 	} else {
-		bcma_warn(core->bus, "Disabling PLL not supported yet!\n");
+		/*
+		 * Mask the PLL but don't wait for it to be disabled. PLL may be
+		 * shared between cores and will be still up if there is another
+		 * core using it.
+		 */
+		bcma_mask32(core, BCMA_CLKCTLST, ~req);
+		bcma_read32(core, BCMA_CLKCTLST);
 	}
 }
 EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -25,13 +25,14 @@ static inline u32 bcma_cc_write32_masked
 	return value;
 }
 
-static u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
+u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
 {
 	if (cc->capabilities & BCMA_CC_CAP_PMU)
 		return bcma_pmu_get_alp_clock(cc);
 
 	return 20000000;
 }
+EXPORT_SYMBOL_GPL(bcma_chipco_get_alp_clock);
 
 static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
 {
@@ -213,6 +214,7 @@ u32 bcma_chipco_gpio_out(struct bcma_drv
 
 	return res;
 }
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_out);
 
 u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
 {
@@ -225,6 +227,7 @@ u32 bcma_chipco_gpio_outen(struct bcma_d
 
 	return res;
 }
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_outen);
 
 /*
  * If the bit is set to 0, chipcommon controlls this GPIO,
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -174,19 +174,35 @@ u32 bcma_pmu_get_alp_clock(struct bcma_d
 	struct bcma_bus *bus = cc->core->bus;
 
 	switch (bus->chipinfo.id) {
+	case BCMA_CHIP_ID_BCM4313:
+	case BCMA_CHIP_ID_BCM43224:
+	case BCMA_CHIP_ID_BCM43225:
+	case BCMA_CHIP_ID_BCM43227:
+	case BCMA_CHIP_ID_BCM43228:
+	case BCMA_CHIP_ID_BCM4331:
+	case BCMA_CHIP_ID_BCM43421:
+	case BCMA_CHIP_ID_BCM43428:
+	case BCMA_CHIP_ID_BCM43431:
 	case BCMA_CHIP_ID_BCM4716:
-	case BCMA_CHIP_ID_BCM4748:
 	case BCMA_CHIP_ID_BCM47162:
-	case BCMA_CHIP_ID_BCM4313:
-	case BCMA_CHIP_ID_BCM5357:
+	case BCMA_CHIP_ID_BCM4748:
 	case BCMA_CHIP_ID_BCM4749:
+	case BCMA_CHIP_ID_BCM5357:
 	case BCMA_CHIP_ID_BCM53572:
+	case BCMA_CHIP_ID_BCM6362:
 		/* always 20Mhz */
 		return 20000 * 1000;
-	case BCMA_CHIP_ID_BCM5356:
 	case BCMA_CHIP_ID_BCM4706:
+	case BCMA_CHIP_ID_BCM5356:
 		/* always 25Mhz */
 		return 25000 * 1000;
+	case BCMA_CHIP_ID_BCM43460:
+	case BCMA_CHIP_ID_BCM4352:
+	case BCMA_CHIP_ID_BCM4360:
+		if (cc->status & BCMA_CC_CHIPST_4360_XTAL_40MZ)
+			return 40000 * 1000;
+		else
+			return 20000 * 1000;
 	default:
 		bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
 			  bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
@@ -373,7 +389,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
 		tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
 		bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);
 
-		tmp = 1 << 10;
+		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
 		break;
 
 	case BCMA_CHIP_ID_BCM4331:
@@ -394,7 +410,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
 						     0x03000a08);
 		}
-		tmp = 1 << 10;
+		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
 		break;
 
 	case BCMA_CHIP_ID_BCM43224:
@@ -427,7 +443,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
 						     0x88888815);
 		}
-		tmp = 1 << 10;
+		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
 		break;
 
 	case BCMA_CHIP_ID_BCM4716:
@@ -461,7 +477,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
 						     0x88888815);
 		}
 
-		tmp = 3 << 9;
+		tmp = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
 		break;
 
 	case BCMA_CHIP_ID_BCM43227:
@@ -497,7 +513,7 @@ void bcma_pmu_spuravoid_pllupdate(struct
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
 						     0x88888815);
 		}
-		tmp = 1 << 10;
+		tmp = BCMA_CC_PMU_CTL_PLL_UPD;
 		break;
 	default:
 		bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -120,6 +120,11 @@ static int bcma_register_cores(struct bc
 			continue;
 		}
 
+		/* Only first GMAC core on BCM4706 is connected and working */
+		if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
+		    core->core_unit > 0)
+			continue;
+
 		core->dev.release = bcma_release_core_dev;
 		core->dev.bus = &bcma_bus_type;
 		dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id);
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -137,19 +137,19 @@ static void bcma_scan_switch_core(struct
 				       addr);
 }
 
-static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
+static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 __iomem **eromptr)
 {
 	u32 ent = readl(*eromptr);
 	(*eromptr)++;
 	return ent;
 }
 
-static void bcma_erom_push_ent(u32 **eromptr)
+static void bcma_erom_push_ent(u32 __iomem **eromptr)
 {
 	(*eromptr)--;
 }
 
-static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
+static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 __iomem **eromptr)
 {
 	u32 ent = bcma_erom_get_ent(bus, eromptr);
 	if (!(ent & SCAN_ER_VALID))
@@ -159,14 +159,14 @@ static s32 bcma_erom_get_ci(struct bcma_
 	return ent;
 }
 
-static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
+static bool bcma_erom_is_end(struct bcma_bus *bus, u32 __iomem **eromptr)
 {
 	u32 ent = bcma_erom_get_ent(bus, eromptr);
 	bcma_erom_push_ent(eromptr);
 	return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
 }
 
-static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
+static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 __iomem **eromptr)
 {
 	u32 ent = bcma_erom_get_ent(bus, eromptr);
 	bcma_erom_push_ent(eromptr);
@@ -175,7 +175,7 @@ static bool bcma_erom_is_bridge(struct b
 		((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
 }
 
-static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
+static void bcma_erom_skip_component(struct bcma_bus *bus, u32 __iomem **eromptr)
 {
 	u32 ent;
 	while (1) {
@@ -189,7 +189,7 @@ static void bcma_erom_skip_component(str
 	bcma_erom_push_ent(eromptr);
 }
 
-static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
+static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 __iomem **eromptr)
 {
 	u32 ent = bcma_erom_get_ent(bus, eromptr);
 	if (!(ent & SCAN_ER_VALID))
@@ -199,7 +199,7 @@ static s32 bcma_erom_get_mst_port(struct
 	return ent;
 }
 
-static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
+static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 __iomem **eromptr,
 				  u32 type, u8 port)
 {
 	u32 addrl, addrh, sizel, sizeh = 0;
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -217,6 +217,7 @@ static void bcma_sprom_extract_r8(struct
 	}
 
 	SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0);
+	SPEX(board_type, SSB_SPROM1_SPID, ~0, 0);
 
 	SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0,
 	     SSB_SPROM4_TXPID2G0_SHIFT);
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -134,6 +134,7 @@ struct bcma_host_ops {
 #define BCMA_CORE_I2S			0x834
 #define BCMA_CORE_SDR_DDR1_MEM_CTL	0x835	/* SDR/DDR1 memory controller core */
 #define BCMA_CORE_SHIM			0x837	/* SHIM component in ubus/6362 */
+#define BCMA_CORE_ARM_CR4		0x83e
 #define BCMA_CORE_DEFAULT		0xFFF
 
 #define BCMA_MAX_NR_CORES		16
@@ -173,6 +174,60 @@ struct bcma_host_ops {
 #define BCMA_CHIP_ID_BCM53572	53572
 #define  BCMA_PKG_ID_BCM47188	9
 
+/* Board types (on PCI usually equals to the subsystem dev id) */
+/* BCM4313 */
+#define BCMA_BOARD_TYPE_BCM94313BU	0X050F
+#define BCMA_BOARD_TYPE_BCM94313HM	0X0510
+#define BCMA_BOARD_TYPE_BCM94313EPA	0X0511
+#define BCMA_BOARD_TYPE_BCM94313HMG	0X051C
+/* BCM4716 */
+#define BCMA_BOARD_TYPE_BCM94716NR2	0X04CD
+/* BCM43224 */
+#define BCMA_BOARD_TYPE_BCM943224X21	0X056E
+#define BCMA_BOARD_TYPE_BCM943224X21_FCC	0X00D1
+#define BCMA_BOARD_TYPE_BCM943224X21B	0X00E9
+#define BCMA_BOARD_TYPE_BCM943224M93	0X008B
+#define BCMA_BOARD_TYPE_BCM943224M93A	0X0090
+#define BCMA_BOARD_TYPE_BCM943224X16	0X0093
+#define BCMA_BOARD_TYPE_BCM94322X9	0X008D
+#define BCMA_BOARD_TYPE_BCM94322M35E	0X008E
+/* BCM43228 */
+#define BCMA_BOARD_TYPE_BCM943228BU8	0X0540
+#define BCMA_BOARD_TYPE_BCM943228BU9	0X0541
+#define BCMA_BOARD_TYPE_BCM943228BU	0X0542
+#define BCMA_BOARD_TYPE_BCM943227HM4L	0X0543
+#define BCMA_BOARD_TYPE_BCM943227HMB	0X0544
+#define BCMA_BOARD_TYPE_BCM943228HM4L	0X0545
+#define BCMA_BOARD_TYPE_BCM943228SD	0X0573
+/* BCM4331 */
+#define BCMA_BOARD_TYPE_BCM94331X19	0X00D6
+#define BCMA_BOARD_TYPE_BCM94331X28	0X00E4
+#define BCMA_BOARD_TYPE_BCM94331X28B	0X010E
+#define BCMA_BOARD_TYPE_BCM94331PCIEBT3AX	0X00E4
+#define BCMA_BOARD_TYPE_BCM94331X12_2G	0X00EC
+#define BCMA_BOARD_TYPE_BCM94331X12_5G	0X00ED
+#define BCMA_BOARD_TYPE_BCM94331X29B	0X00EF
+#define BCMA_BOARD_TYPE_BCM94331CSAX	0X00EF
+#define BCMA_BOARD_TYPE_BCM94331X19C	0X00F5
+#define BCMA_BOARD_TYPE_BCM94331X33	0X00F4
+#define BCMA_BOARD_TYPE_BCM94331BU	0X0523
+#define BCMA_BOARD_TYPE_BCM94331S9BU	0X0524
+#define BCMA_BOARD_TYPE_BCM94331MC	0X0525
+#define BCMA_BOARD_TYPE_BCM94331MCI	0X0526
+#define BCMA_BOARD_TYPE_BCM94331PCIEBT4	0X0527
+#define BCMA_BOARD_TYPE_BCM94331HM	0X0574
+#define BCMA_BOARD_TYPE_BCM94331PCIEDUAL	0X059B
+#define BCMA_BOARD_TYPE_BCM94331MCH5	0X05A9
+#define BCMA_BOARD_TYPE_BCM94331CS	0X05C6
+#define BCMA_BOARD_TYPE_BCM94331CD	0X05DA
+/* BCM53572 */
+#define BCMA_BOARD_TYPE_BCM953572BU	0X058D
+#define BCMA_BOARD_TYPE_BCM953572NR2	0X058E
+#define BCMA_BOARD_TYPE_BCM947188NR2	0X058F
+#define BCMA_BOARD_TYPE_BCM953572SDRNR2	0X0590
+/* BCM43142 */
+#define BCMA_BOARD_TYPE_BCM943142HM	0X05E0
+
 struct bcma_device {
 	struct bcma_bus *bus;
 	struct bcma_device_id id;
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -104,6 +104,7 @@
 #define  BCMA_CC_CHIPST_4706_MIPS_BENDIAN	BIT(3) /* 0: little, 1: big endian */
 #define  BCMA_CC_CHIPST_4706_PCIE1_DISABLE	BIT(5) /* PCIE1 enable strap pin */
 #define  BCMA_CC_CHIPST_5357_NAND_BOOT		BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
+#define  BCMA_CC_CHIPST_4360_XTAL_40MZ		0x00000001
 #define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
 #define  BCMA_CC_JCMD_START		0x80000000
 #define  BCMA_CC_JCMD_BUSY		0x80000000
@@ -315,6 +316,9 @@
 #define BCMA_CC_PMU_CTL			0x0600 /* PMU control */
 #define  BCMA_CC_PMU_CTL_ILP_DIV	0xFFFF0000 /* ILP div mask */
 #define  BCMA_CC_PMU_CTL_ILP_DIV_SHIFT	16
+#define  BCMA_CC_PMU_CTL_RES		0x00006000 /* reset control mask */
+#define  BCMA_CC_PMU_CTL_RES_SHIFT	13
+#define  BCMA_CC_PMU_CTL_RES_RELOAD	0x2	/* reload POR values */
 #define  BCMA_CC_PMU_CTL_PLL_UPD	0x00000400
 #define  BCMA_CC_PMU_CTL_NOILPONW	0x00000200 /* No ILP on wait */
 #define  BCMA_CC_PMU_CTL_HTREQEN	0x00000100 /* HT req enable */
@@ -607,6 +611,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
 
 extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
 
+extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
+
 void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
 
 u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
--- a/include/linux/bcma/bcma_regs.h
+++ b/include/linux/bcma/bcma_regs.h
@@ -37,6 +37,7 @@
 #define  BCMA_IOST_BIST_DONE		0x8000
 #define BCMA_RESET_CTL			0x0800
 #define  BCMA_RESET_CTL_RESET		0x0001
+#define BCMA_RESET_ST			0x0804
 
 /* BCMA PCI config space registers. */
 #define BCMA_PCI_PMCSR			0x44