openwrtv3/target/linux/brcm-2.4/base-files/etc/init.d/netconfig

249 lines
6.1 KiB
Text
Raw Normal View History

#!/bin/sh /etc/rc.common
# Copyright (C) 2006 OpenWrt.org
START=05
start() {
[ -e /etc/config/network ] && {
local batch
config_cb() {
case "$1" in
switch)
option_cb() {
case "$1" in
vlan[0-9]|vlan1[0-5])
local id="${1#vlan}"
local ports="${2%\*}"
append batch "delete network.eth0.${1}${N}"
append batch "set network.eth0_${id}=switch_vlan${N}"
append batch "set network.eth0_${id}.device=eth0${N}"
append batch "set network.eth0_${id}.vlan=${id}${N}"
append batch "set network.eth0_${id}.ports='${ports}'${N}"
;;
esac
}
;;
switch_vlan)
option_cb() { :; }
batch=""
;;
esac
}
config_load network
[ -n "$batch" ] && {
logger -t netconfig "migrating switch config to new format ..."
echo "$batch${N}commit network" | uci batch
}
exit 0
}
mkdir -p /etc/config
(
if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
# WGT634u
echo boardtype=wgt634u
else
strings "$(find_mtd_part nvram)"
fi
) | awk '
function p(cfgname, name) {
if (c[name] != "") print " option " cfgname " \"" c[name] "\""
}
function vlan(id, name) {
if (c[name] != "") {
print "config switch_vlan eth0_" id
print " option device \"eth0\""
print " option vlan " id
print " option ports \"" c[name] "\""
print ""
}
}
function macinc(mac, maca, i, result) {
split(mac, maca, ":")
for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
if (++maca[6] > 0xff) {
maca[5]++
maca[6] = 0
}
for (i = 1; i <= 6; i++) {
if (i != 1) result = result ":"
result = result sprintf("%02x", maca[i])
}
return result
}
BEGIN {
FS="="
c["lan_ifname"]="eth0.0"
c["wan_ifname"]="eth0.1"
c["vlan0ports"]="1 2 3 4 5"
c["vlan1ports"]="0 5"
getline < "/proc/diag/model"
model=$0
for (i = 0; i < 6; i++) {
if (mac_check != "") mac_check = mac_check ":"
mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
}
}
($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
nvram[$1] = $2
}
END {
if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
c["wan_ifname"] = ""
c["lan_ifname"] = "eth1"
}
if (model == "ASUS WL-330gE") {
c["wan_ifname"] = ""
c["lan_ifname"] = "eth0"
c["vlan0ports"] = ""
c["vlan1ports"] = ""
}
if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) {
c["wan_ifname"] = "eth1"
c["lan_ifname"] = "eth0"
}
if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) {
c["vlan0ports"] = "0 1 2 3 5"
c["vlan1ports"] = "4 5"
}
if (model == "Dell TrueMobile 2300") {
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
c["vlan0ports"] = "0 1 2 3 4 5u"
c["vlan1ports"] = ""
}
if (nvram["boardtype"] == "bcm94710r4") {
# Toshiba WRC-1000
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
}
if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
c["vlan0ports"] = "0 1 2 3 5"
c["vlan1ports"] = "4 5"
}
if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
if (nvram["boardnum"] == "45") {
# WL-500gP
c["vlan0ports"] = "1 2 3 4 5"
c["vlan1ports"] = "0 5"
} else {
# Generic BCM94704
c["vlan0ports"] = "0 1 2 3 4 5u"
c["vlan1ports"] = ""
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
# MAC addresses on 4704 tend to be screwed up. Add a workaround here
if (nvram["et0macaddr"] ~ mac_check) {
c["lan_macaddr"] = nvram["et0macaddr"]
c["wan_macaddr"] = macinc(c["lan_macaddr"])
}
}
}
# Buffalo WBR-B11 and Buffalo WBR-G54
if (nvram["boardtype"] == "bcm94710ap") {
c["vlan0ports"] = "0 1 2 3 4 5u"
c["vlan1ports"] = ""
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
}
# generic broadcom 4705/4785 processor with 5397 switch?
# EXCEPT Linksys WRT300N V1.1
if ((nvram["boardtype"] == "0x478") && \
(model != "Linksys WRT300N V1.1")) {
c["vlan0ports"] = "1 2 3 4 8*"
c["vlan1ports"] = "0 8"
}
# WAP54G
if ((nvram["boardnum"] == "2") || \
(nvram["boardnum"] == "1024")) {
c["lan_ifname"]="eth0"
c["wan_ifname"]=""
}
# Sitecom WL-105b
if ((nvram["boardum"] == "2") && \
(nvram["GemtekPmonVer"] == "1")) {
c["lan_ifname"]="eth0"
c["wan_ifname"]=""
}
# ASUS WL-700gE
# These are actually same as defaults above. For some reason this script applies
# Generic BCM94704 settings instead so we revert to proper settings here.
# Hopefully someone will fix this properly soon.
if (model == "ASUS WL-700gE") {
c["lan_ifname"]="eth0.0"
c["wan_ifname"]="eth0.1"
c["vlan0ports"]="1 2 3 4 5"
c["vlan1ports"]="0 5"
}
if (model == "Motorola WR850G V2/V3") {
c["vlan0ports"]="0 1 2 3 5"
c["vlan1ports"]="4 5"
}
if (model == "ASUS WL-500W") {
c["lan_ifname"] = "eth0"
c["wan_ifname"] = "eth1"
c["vlan0ports"] = "0 1 2 3 4 5u"
c["vlan1ports"] = ""
}
if (model == "OvisLink WL-1600GL") {
c["lan_ifname"] = "eth0.0"
c["wan_ifname"] = "eth0.1"
c["vlan0ports"] = "0 1 2 3 5"
c["vlan1ports"] = "4 5"
}
if (c["vlan0ports"] || c["vlan1ports"]) {
print "#### VLAN configuration "
print "config switch eth0"
print " option enable 1"
print ""
vlan(0, "vlan0ports")
vlan(1, "vlan1ports")
}
print "#### Loopback configuration"
print "config interface loopback"
print " option ifname \"lo\""
print " option proto static"
print " option ipaddr 127.0.0.1"
print " option netmask 255.0.0.0"
print ""
print ""
print "#### LAN configuration"
print "config interface lan"
print " option type bridge"
p("ifname", "lan_ifname")
p("macaddr", "lan_macaddr")
print " option proto static"
print " option ipaddr 192.168.1.1"
print " option netmask 255.255.255.0"
print ""
print ""
if (c["wan_ifname"]) {
print "#### WAN configuration"
print "config interface wan"
p("ifname", "wan_ifname")
p("macaddr", "wan_macaddr")
print " option proto dhcp"
} else {
print "#### WAN configuration (disabled)"
print "#config interface wan"
print "# option proto dhcp"
}
}' > /etc/config/network
}