openwrtv3/package/network/utils/iw/patches/001-nl80211_h_sync.patch

240 lines
9.5 KiB
Diff
Raw Normal View History

--- a/nl80211.h
+++ b/nl80211.h
@@ -27,6 +27,8 @@
#include <linux/types.h>
+#define NL80211_GENL_NAME "nl80211"
+
/**
* DOC: Station handling
*
@@ -1429,6 +1431,11 @@ enum nl80211_commands {
* @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which
* the connection should have increased reliability (u16).
*
+ * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16).
+ * This is similar to @NL80211_ATTR_STA_AID but with a difference of being
+ * allowed to be used with the first @NL80211_CMD_SET_STATION command to
+ * update a TDLS peer STA entry.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1727,6 +1734,10 @@ enum nl80211_attrs {
NL80211_ATTR_CRIT_PROT_ID,
NL80211_ATTR_MAX_CRIT_PROT_DURATION,
+ NL80211_ATTR_PEER_AID,
+
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -1991,6 +2002,10 @@ enum nl80211_sta_bss_param {
* @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode
* @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards
* non-peer STA
+ * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU
+ * Contains a nested array of signal strength attributes (u8, dBm)
+ * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average
+ * Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
* @__NL80211_STA_INFO_AFTER_LAST: internal
* @NL80211_STA_INFO_MAX: highest possible station info attribute
*/
@@ -2020,6 +2035,8 @@ enum nl80211_sta_info {
NL80211_STA_INFO_NONPEER_PM,
NL80211_STA_INFO_RX_BYTES64,
NL80211_STA_INFO_TX_BYTES64,
+ NL80211_STA_INFO_CHAIN_SIGNAL,
+ NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
/* keep last */
__NL80211_STA_INFO_AFTER_LAST,
@@ -2413,6 +2430,8 @@ enum nl80211_survey_info {
* @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
* @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
* overrides all other flags.
+ * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address
+ * and ACK incoming unicast packets.
*
* @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
* @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
@@ -2424,6 +2443,7 @@ enum nl80211_mntr_flags {
NL80211_MNTR_FLAG_CONTROL,
NL80211_MNTR_FLAG_OTHER_BSS,
NL80211_MNTR_FLAG_COOK_FRAMES,
+ NL80211_MNTR_FLAG_ACTIVE,
/* keep last */
__NL80211_MNTR_FLAG_AFTER_LAST,
@@ -2559,6 +2579,10 @@ enum nl80211_mesh_power_mode {
*
* @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs)
*
+ * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
+ * established peering with for longer than this time (in seconds), then
+ * remove it from the STA's list of peers. Default is 30 minutes.
+ *
* @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
*/
enum nl80211_meshconf_params {
@@ -2590,6 +2614,7 @@ enum nl80211_meshconf_params {
NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
NL80211_MESHCONF_POWER_MODE,
NL80211_MESHCONF_AWAKE_WINDOW,
+ NL80211_MESHCONF_PLINK_TIMEOUT,
/* keep last */
__NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -2637,6 +2662,10 @@ enum nl80211_meshconf_params {
* @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will
* implement an MPM which handles peer allocation and state.
*
+ * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication
+ * method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE).
+ * Default is no authentication method required.
+ *
* @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
*
* @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
@@ -2650,6 +2679,7 @@ enum nl80211_mesh_setup_params {
NL80211_MESH_SETUP_USERSPACE_AMPE,
NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
NL80211_MESH_SETUP_USERSPACE_MPM,
+ NL80211_MESH_SETUP_AUTH_PROTOCOL,
/* keep last */
__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
@@ -2730,6 +2760,8 @@ enum nl80211_channel_type {
* and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well
* @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
* attribute must be provided as well
+ * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel
*/
enum nl80211_chan_width {
NL80211_CHAN_WIDTH_20_NOHT,
@@ -2738,6 +2770,8 @@ enum nl80211_chan_width {
NL80211_CHAN_WIDTH_80,
NL80211_CHAN_WIDTH_80P80,
NL80211_CHAN_WIDTH_160,
+ NL80211_CHAN_WIDTH_5,
+ NL80211_CHAN_WIDTH_10,
};
/**
@@ -3028,11 +3062,11 @@ enum nl80211_tx_power_setting {
};
/**
- * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
- * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
- * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
+ * enum nl80211_packet_pattern_attr - packet pattern attribute
+ * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
+ * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
* a zero bit are ignored
- * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
+ * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have
* a bit for each byte in the pattern. The lowest-order bit corresponds
* to the first byte of the pattern, but the bytes of the pattern are
* in a little-endian-like format, i.e. the 9th byte of the pattern
@@ -3043,23 +3077,23 @@ enum nl80211_tx_power_setting {
* Note that the pattern matching is done as though frames were not
* 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
* first (including SNAP header unpacking) and then matched.
- * @NL80211_WOWLAN_PKTPAT_OFFSET: packet offset, pattern is matched after
+ * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after
* these fixed number of bytes of received packet
- * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
- * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
+ * @NUM_NL80211_PKTPAT: number of attributes
+ * @MAX_NL80211_PKTPAT: max attribute number
*/
-enum nl80211_wowlan_packet_pattern_attr {
- __NL80211_WOWLAN_PKTPAT_INVALID,
- NL80211_WOWLAN_PKTPAT_MASK,
- NL80211_WOWLAN_PKTPAT_PATTERN,
- NL80211_WOWLAN_PKTPAT_OFFSET,
+enum nl80211_packet_pattern_attr {
+ __NL80211_PKTPAT_INVALID,
+ NL80211_PKTPAT_MASK,
+ NL80211_PKTPAT_PATTERN,
+ NL80211_PKTPAT_OFFSET,
- NUM_NL80211_WOWLAN_PKTPAT,
- MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
+ NUM_NL80211_PKTPAT,
+ MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1,
};
/**
- * struct nl80211_wowlan_pattern_support - pattern support information
+ * struct nl80211_pattern_support - packet pattern support information
* @max_patterns: maximum number of patterns supported
* @min_pattern_len: minimum length of each pattern
* @max_pattern_len: maximum length of each pattern
@@ -3069,13 +3103,22 @@ enum nl80211_wowlan_packet_pattern_attr
* that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
* capability information given by the kernel to userspace.
*/
-struct nl80211_wowlan_pattern_support {
+struct nl80211_pattern_support {
__u32 max_patterns;
__u32 min_pattern_len;
__u32 max_pattern_len;
__u32 max_pkt_offset;
} __attribute__((packed));
+/* only for backward compatibility */
+#define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID
+#define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK
+#define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN
+#define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET
+#define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT
+#define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT
+#define nl80211_wowlan_pattern_support nl80211_pattern_support
+
/**
* enum nl80211_wowlan_triggers - WoWLAN trigger definitions
* @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
@@ -3095,7 +3138,7 @@ struct nl80211_wowlan_pattern_support {
* pattern matching is done after the packet is converted to the MSDU.
*
* In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
- * carrying a &struct nl80211_wowlan_pattern_support.
+ * carrying a &struct nl80211_pattern_support.
*
* When reporting wakeup. it is a u32 attribute containing the 0-based
* index of the pattern that caused the wakeup, in the patterns passed
@@ -3252,7 +3295,7 @@ struct nl80211_wowlan_tcp_data_token_fea
* @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a
* u32 attribute holding the maximum length
* @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for
- * feature advertising. The mask works like @NL80211_WOWLAN_PKTPAT_MASK
+ * feature advertising. The mask works like @NL80211_PKTPAT_MASK
* but on the TCP payload only.
* @NUM_NL80211_WOWLAN_TCP: number of TCP attributes
* @MAX_NL80211_WOWLAN_TCP: highest attribute number
@@ -3556,6 +3599,10 @@ enum nl80211_ap_sme_features {
* Peering Management entity which may be implemented by registering for
* beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is
* still generated by the driver.
+ * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor
+ * interface. An active monitor interface behaves like a normal monitor
+ * interface, but gets added to the driver. It ensures that incoming
+ * unicast packets directed at the configured interface address get ACKed.
*/
enum nl80211_feature_flags {
NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
@@ -3575,6 +3622,7 @@ enum nl80211_feature_flags {
NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14,
NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15,
NL80211_FEATURE_USERSPACE_MPM = 1 << 16,
+ NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17,
};
/**