2241 lines
49 KiB
Diff
2241 lines
49 KiB
Diff
|
From bf2ef777f8ed0830be49b62167cc67d3be6abba6 Mon Sep 17 00:00:00 2001
|
||
|
From: Tim Harvey <tharvey@gateworks.com>
|
||
|
Date: Tue, 22 Oct 2013 21:51:26 -0700
|
||
|
Subject: [PATCH 3/3] ARM: dts: add Gateworks Ventana support
|
||
|
|
||
|
The Gateworks Ventana product family consists of several baseboard designs
|
||
|
based on the Freescale i.MX6 family of processors. Each baseboard has a
|
||
|
different set of possible features.
|
||
|
|
||
|
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
|
||
|
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
|
||
|
---
|
||
|
arch/arm/boot/dts/Makefile | 9 +
|
||
|
arch/arm/boot/dts/imx6dl-gw51xx.dts | 19 ++
|
||
|
arch/arm/boot/dts/imx6dl-gw52xx.dts | 19 ++
|
||
|
arch/arm/boot/dts/imx6dl-gw53xx.dts | 19 ++
|
||
|
arch/arm/boot/dts/imx6dl-gw54xx.dts | 19 ++
|
||
|
arch/arm/boot/dts/imx6q-gw51xx.dts | 19 ++
|
||
|
arch/arm/boot/dts/imx6q-gw52xx.dts | 23 ++
|
||
|
arch/arm/boot/dts/imx6q-gw53xx.dts | 23 ++
|
||
|
arch/arm/boot/dts/imx6q-gw5400-a.dts | 443 ++++++++++++++++++++++++++++++++
|
||
|
arch/arm/boot/dts/imx6q-gw54xx.dts | 23 ++
|
||
|
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 272 ++++++++++++++++++++
|
||
|
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 373 +++++++++++++++++++++++++++
|
||
|
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 429 +++++++++++++++++++++++++++++++
|
||
|
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 457 ++++++++++++++++++++++++++++++++++
|
||
|
14 files changed, 2147 insertions(+)
|
||
|
create mode 100644 arch/arm/boot/dts/imx6dl-gw51xx.dts
|
||
|
create mode 100644 arch/arm/boot/dts/imx6dl-gw52xx.dts
|
||
|
create mode 100644 arch/arm/boot/dts/imx6dl-gw53xx.dts
|
||
|
create mode 100644 arch/arm/boot/dts/imx6dl-gw54xx.dts
|
||
|
create mode 100644 arch/arm/boot/dts/imx6q-gw51xx.dts
|
||
|
create mode 100644 arch/arm/boot/dts/imx6q-gw52xx.dts
|
||
|
create mode 100644 arch/arm/boot/dts/imx6q-gw53xx.dts
|
||
|
create mode 100644 arch/arm/boot/dts/imx6q-gw5400-a.dts
|
||
|
create mode 100644 arch/arm/boot/dts/imx6q-gw54xx.dts
|
||
|
create mode 100644 arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
|
||
|
create mode 100644 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
|
||
|
create mode 100644 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
|
||
|
create mode 100644 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
|
||
|
|
||
|
--- a/arch/arm/boot/dts/Makefile
|
||
|
+++ b/arch/arm/boot/dts/Makefile
|
||
|
@@ -136,10 +136,19 @@ dtb-$(CONFIG_ARCH_MXC) += \
|
||
|
imx53-mba53.dtb \
|
||
|
imx53-qsb.dtb \
|
||
|
imx53-smd.dtb \
|
||
|
+ imx6dl-gw51xx.dtb \
|
||
|
+ imx6dl-gw52xx.dtb \
|
||
|
+ imx6dl-gw53xx.dtb \
|
||
|
+ imx6dl-gw54xx.dtb \
|
||
|
imx6dl-sabreauto.dtb \
|
||
|
imx6dl-sabresd.dtb \
|
||
|
imx6dl-wandboard.dtb \
|
||
|
imx6q-arm2.dtb \
|
||
|
+ imx6q-gw51xx.dtb \
|
||
|
+ imx6q-gw52xx.dtb \
|
||
|
+ imx6q-gw53xx.dtb \
|
||
|
+ imx6q-gw5400-a.dtb \
|
||
|
+ imx6q-gw54xx.dtb \
|
||
|
imx6q-phytec-pbab01.dtb \
|
||
|
imx6q-sabreauto.dtb \
|
||
|
imx6q-sabrelite.dtb \
|
||
|
--- /dev/null
|
||
|
+++ b/arch/arm/boot/dts/imx6dl-gw51xx.dts
|
||
|
@@ -0,0 +1,19 @@
|
||
|
+/*
|
||
|
+ * Copyright 2013 Gateworks Corporation
|
||
|
+ *
|
||
|
+ * The code contained herein is licensed under the GNU General Public
|
||
|
+ * License. You may obtain a copy of the GNU General Public License
|
||
|
+ * Version 2 or later at the following locations:
|
||
|
+ *
|
||
|
+ * http://www.opensource.org/licenses/gpl-license.html
|
||
|
+ * http://www.gnu.org/copyleft/gpl.html
|
||
|
+ */
|
||
|
+
|
||
|
+/dts-v1/;
|
||
|
+#include "imx6dl.dtsi"
|
||
|
+#include "imx6qdl-gw51xx.dtsi"
|
||
|
+
|
||
|
+/ {
|
||
|
+ model = "Gateworks Ventana i.MX6 DualLite GW51XX";
|
||
|
+ compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
|
||
|
+};
|
||
|
--- /dev/null
|
||
|
+++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts
|
||
|
@@ -0,0 +1,19 @@
|
||
|
+/*
|
||
|
+ * Copyright 2013 Gateworks Corporation
|
||
|
+ *
|
||
|
+ * The code contained herein is licensed under the GNU General Public
|
||
|
+ * License. You may obtain a copy of the GNU General Public License
|
||
|
+ * Version 2 or later at the following locations:
|
||
|
+ *
|
||
|
+ * http://www.opensource.org/licenses/gpl-license.html
|
||
|
+ * http://www.gnu.org/copyleft/gpl.html
|
||
|
+ */
|
||
|
+
|
||
|
+/dts-v1/;
|
||
|
+#include "imx6dl.dtsi"
|
||
|
+#include "imx6qdl-gw52xx.dtsi"
|
||
|
+
|
||
|
+/ {
|
||
|
+ model = "Gateworks Ventana i.MX6 DualLite GW52XX";
|
||
|
+ compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
|
||
|
+};
|
||
|
--- /dev/null
|
||
|
+++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts
|
||
|
@@ -0,0 +1,19 @@
|
||
|
+/*
|
||
|
+ * Copyright 2013 Gateworks Corporation
|
||
|
+ *
|
||
|
+ * The code contained herein is licensed under the GNU General Public
|
||
|
+ * License. You may obtain a copy of the GNU General Public License
|
||
|
+ * Version 2 or later at the following locations:
|
||
|
+ *
|
||
|
+ * http://www.opensource.org/licenses/gpl-license.html
|
||
|
+ * http://www.gnu.org/copyleft/gpl.html
|
||
|
+ */
|
||
|
+
|
||
|
+/dts-v1/;
|
||
|
+#include "imx6dl.dtsi"
|
||
|
+#include "imx6qdl-gw53xx.dtsi"
|
||
|
+
|
||
|
+/ {
|
||
|
+ model = "Gateworks Ventana i.MX6 DualLite GW53XX";
|
||
|
+ compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
|
||
|
+};
|
||
|
--- /dev/null
|
||
|
+++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts
|
||
|
@@ -0,0 +1,19 @@
|
||
|
+/*
|
||
|
+ * Copyright 2013 Gateworks Corporation
|
||
|
+ *
|
||
|
+ * The code contained herein is licensed under the GNU General Public
|
||
|
+ * License. You may obtain a copy of the GNU General Public License
|
||
|
+ * Version 2 or later at the following locations:
|
||
|
+ *
|
||
|
+ * http://www.opensource.org/licenses/gpl-license.html
|
||
|
+ * http://www.gnu.org/copyleft/gpl.html
|
||
|
+ */
|
||
|
+
|
||
|
+/dts-v1/;
|
||
|
+#include "imx6dl.dtsi"
|
||
|
+#include "imx6qdl-gw54xx.dtsi"
|
||
|
+
|
||
|
+/ {
|
||
|
+ model = "Gateworks Ventana i.MX6 DualLite GW54XX";
|
||
|
+ compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
|
||
|
+};
|
||
|
--- /dev/null
|
||
|
+++ b/arch/arm/boot/dts/imx6q-gw51xx.dts
|
||
|
@@ -0,0 +1,19 @@
|
||
|
+/*
|
||
|
+ * Copyright 2013 Gateworks Corporation
|
||
|
+ *
|
||
|
+ * The code contained herein is licensed under the GNU General Public
|
||
|
+ * License. You may obtain a copy of the GNU General Public License
|
||
|
+ * Version 2 or later at the following locations:
|
||
|
+ *
|
||
|
+ * http://www.opensource.org/licenses/gpl-license.html
|
||
|
+ * http://www.gnu.org/copyleft/gpl.html
|
||
|
+ */
|
||
|
+
|
||
|
+/dts-v1/;
|
||
|
+#include "imx6q.dtsi"
|
||
|
+#include "imx6qdl-gw54xx.dtsi"
|
||
|
+
|
||
|
+/ {
|
||
|
+ model = "Gateworks Ventana i.MX6 Quad GW51XX";
|
||
|
+ compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
|
||
|
+};
|
||
|
--- /dev/null
|
||
|
+++ b/arch/arm/boot/dts/imx6q-gw52xx.dts
|
||
|
@@ -0,0 +1,23 @@
|
||
|
+/*
|
||
|
+ * Copyright 2013 Gateworks Corporation
|
||
|
+ *
|
||
|
+ * The code contained herein is licensed under the GNU General Public
|
||
|
+ * License. You may obtain a copy of the GNU General Public License
|
||
|
+ * Version 2 or later at the following locations:
|
||
|
+ *
|
||
|
+ * http://www.opensource.org/licenses/gpl-license.html
|
||
|
+ * http://www.gnu.org/copyleft/gpl.html
|
||
|
+ */
|
||
|
+
|
||
|
+/dts-v1/;
|
||
|
+#include "imx6q.dtsi"
|
||
|
+#include "imx6qdl-gw52xx.dtsi"
|
||
|
+
|
||
|
+/ {
|
||
|
+ model = "Gateworks Ventana i.MX6 Quad GW52XX";
|
||
|
+ compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
|
||
|
+};
|
||
|
+
|
||
|
+&sata {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
--- /dev/null
|
||
|
+++ b/arch/arm/boot/dts/imx6q-gw53xx.dts
|
||
|
@@ -0,0 +1,23 @@
|
||
|
+/*
|
||
|
+ * Copyright 2013 Gateworks Corporation
|
||
|
+ *
|
||
|
+ * The code contained herein is licensed under the GNU General Public
|
||
|
+ * License. You may obtain a copy of the GNU General Public License
|
||
|
+ * Version 2 or later at the following locations:
|
||
|
+ *
|
||
|
+ * http://www.opensource.org/licenses/gpl-license.html
|
||
|
+ * http://www.gnu.org/copyleft/gpl.html
|
||
|
+ */
|
||
|
+
|
||
|
+/dts-v1/;
|
||
|
+#include "imx6q.dtsi"
|
||
|
+#include "imx6qdl-gw53xx.dtsi"
|
||
|
+
|
||
|
+/ {
|
||
|
+ model = "Gateworks Ventana i.MX6 Quad GW53XX";
|
||
|
+ compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
|
||
|
+};
|
||
|
+
|
||
|
+&sata {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
--- /dev/null
|
||
|
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
|
||
|
@@ -0,0 +1,443 @@
|
||
|
+/*
|
||
|
+ * Copyright 2013 Gateworks Corporation
|
||
|
+ *
|
||
|
+ * The code contained herein is licensed under the GNU General Public
|
||
|
+ * License. You may obtain a copy of the GNU General Public License
|
||
|
+ * Version 2 or later at the following locations:
|
||
|
+ *
|
||
|
+ * http://www.opensource.org/licenses/gpl-license.html
|
||
|
+ * http://www.gnu.org/copyleft/gpl.html
|
||
|
+ */
|
||
|
+
|
||
|
+/dts-v1/;
|
||
|
+#include "imx6q.dtsi"
|
||
|
+
|
||
|
+/ {
|
||
|
+ model = "Gateworks Ventana GW5400-A";
|
||
|
+ compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
|
||
|
+
|
||
|
+ /* these are used by bootloader for disabling nodes */
|
||
|
+ aliases {
|
||
|
+ ethernet0 = &fec;
|
||
|
+ ethernet1 = ð1;
|
||
|
+ i2c0 = &i2c1;
|
||
|
+ i2c1 = &i2c2;
|
||
|
+ i2c2 = &i2c3;
|
||
|
+ led0 = &led0;
|
||
|
+ led1 = &led1;
|
||
|
+ led2 = &led2;
|
||
|
+ sky2 = ð1;
|
||
|
+ ssi0 = &ssi1;
|
||
|
+ spi0 = &ecspi1;
|
||
|
+ usb0 = &usbh1;
|
||
|
+ usb1 = &usbotg;
|
||
|
+ usdhc2 = &usdhc3;
|
||
|
+ };
|
||
|
+
|
||
|
+ chosen {
|
||
|
+ bootargs = "console=ttymxc1,115200";
|
||
|
+ };
|
||
|
+
|
||
|
+ leds {
|
||
|
+ compatible = "gpio-leds";
|
||
|
+
|
||
|
+ led0: user1 {
|
||
|
+ label = "user1";
|
||
|
+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
|
||
|
+ default-state = "on";
|
||
|
+ linux,default-trigger = "heartbeat";
|
||
|
+ };
|
||
|
+
|
||
|
+ led1: user2 {
|
||
|
+ label = "user2";
|
||
|
+ gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
|
||
|
+ default-state = "off";
|
||
|
+ };
|
||
|
+
|
||
|
+ led2: user3 {
|
||
|
+ label = "user3";
|
||
|
+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
|
||
|
+ default-state = "off";
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ memory {
|
||
|
+ reg = <0x10000000 0x40000000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ pps {
|
||
|
+ compatible = "pps-gpio";
|
||
|
+ gpios = <&gpio1 5 0>;
|
||
|
+ status = "okay";
|
||
|
+ };
|
||
|
+
|
||
|
+ regulators {
|
||
|
+ compatible = "simple-bus";
|
||
|
+
|
||
|
+ reg_1p0v: 1p0v {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "1P0V";
|
||
|
+ regulator-min-microvolt = <1000000>;
|
||
|
+ regulator-max-microvolt = <1000000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ reg_3p3v: 3p3v {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "3P3V";
|
||
|
+ regulator-min-microvolt = <3300000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ reg_usb_h1_vbus: usb_h1_vbus {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "usb_h1_vbus";
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ reg_usb_otg_vbus: usb_otg_vbus {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "usb_otg_vbus";
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ gpio = <&gpio3 22 0>;
|
||
|
+ enable-active-high;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ sound {
|
||
|
+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
|
||
|
+ "fsl,imx-audio-sgtl5000";
|
||
|
+ model = "imx6q-sabrelite-sgtl5000";
|
||
|
+ ssi-controller = <&ssi1>;
|
||
|
+ audio-codec = <&codec>;
|
||
|
+ audio-routing =
|
||
|
+ "MIC_IN", "Mic Jack",
|
||
|
+ "Mic Jack", "Mic Bias",
|
||
|
+ "Headphone Jack", "HP_OUT";
|
||
|
+ mux-int-port = <1>;
|
||
|
+ mux-ext-port = <4>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&audmux {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_audmux_1>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&ecspi1 {
|
||
|
+ fsl,spi-num-chipselects = <1>;
|
||
|
+ cs-gpios = <&gpio3 19 0>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ flash: m25p80@0 {
|
||
|
+ compatible = "sst,w25q256";
|
||
|
+ spi-max-frequency = <30000000>;
|
||
|
+ reg = <0>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&fec {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_enet_1>;
|
||
|
+ phy-mode = "rgmii";
|
||
|
+ phy-reset-gpios = <&gpio1 30 0>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&i2c1 {
|
||
|
+ clock-frequency = <100000>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_i2c1_1>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ eeprom1: eeprom@50 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x50>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ eeprom2: eeprom@51 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x51>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ eeprom3: eeprom@52 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x52>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ eeprom4: eeprom@53 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x53>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ gpio: pca9555@23 {
|
||
|
+ compatible = "nxp,pca9555";
|
||
|
+ reg = <0x23>;
|
||
|
+ gpio-controller;
|
||
|
+ #gpio-cells = <2>;
|
||
|
+ };
|
||
|
+
|
||
|
+ hwmon: gsc@29 {
|
||
|
+ compatible = "gw,gsp";
|
||
|
+ reg = <0x29>;
|
||
|
+ };
|
||
|
+
|
||
|
+ rtc: ds1672@68 {
|
||
|
+ compatible = "dallas,ds1672";
|
||
|
+ reg = <0x68>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&i2c2 {
|
||
|
+ clock-frequency = <100000>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_i2c2_2>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ pmic: pfuze100@08 {
|
||
|
+ compatible = "fsl,pfuze100";
|
||
|
+ reg = <0x08>;
|
||
|
+
|
||
|
+ regulators {
|
||
|
+ sw1a_reg: sw1ab {
|
||
|
+ regulator-min-microvolt = <300000>;
|
||
|
+ regulator-max-microvolt = <1875000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-ramp-delay = <6250>;
|
||
|
+ };
|
||
|
+
|
||
|
+ sw1c_reg: sw1c {
|
||
|
+ regulator-min-microvolt = <300000>;
|
||
|
+ regulator-max-microvolt = <1875000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-ramp-delay = <6250>;
|
||
|
+ };
|
||
|
+
|
||
|
+ sw2_reg: sw2 {
|
||
|
+ regulator-min-microvolt = <800000>;
|
||
|
+ regulator-max-microvolt = <3950000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ sw3a_reg: sw3a {
|
||
|
+ regulator-min-microvolt = <400000>;
|
||
|
+ regulator-max-microvolt = <1975000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ sw3b_reg: sw3b {
|
||
|
+ regulator-min-microvolt = <400000>;
|
||
|
+ regulator-max-microvolt = <1975000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ sw4_reg: sw4 {
|
||
|
+ regulator-min-microvolt = <800000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ swbst_reg: swbst {
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5150000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ snvs_reg: vsnvs {
|
||
|
+ regulator-min-microvolt = <1000000>;
|
||
|
+ regulator-max-microvolt = <3000000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ vref_reg: vrefddr {
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ vgen1_reg: vgen1 {
|
||
|
+ regulator-min-microvolt = <800000>;
|
||
|
+ regulator-max-microvolt = <1550000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vgen2_reg: vgen2 {
|
||
|
+ regulator-min-microvolt = <800000>;
|
||
|
+ regulator-max-microvolt = <1550000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vgen3_reg: vgen3 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vgen4_reg: vgen4 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ vgen5_reg: vgen5 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ vgen6_reg: vgen6 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ pciswitch: pex8609@3f {
|
||
|
+ compatible = "plx,pex8609";
|
||
|
+ reg = <0x3f>;
|
||
|
+ };
|
||
|
+
|
||
|
+ pciclkgen: si52147@6b {
|
||
|
+ compatible = "sil,si52147";
|
||
|
+ reg = <0x6b>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&i2c3 {
|
||
|
+ clock-frequency = <100000>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_i2c3_2>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ accelerometer: mma8450@1c {
|
||
|
+ compatible = "fsl,mma8450";
|
||
|
+ reg = <0x1c>;
|
||
|
+ };
|
||
|
+
|
||
|
+ codec: sgtl5000@0a {
|
||
|
+ compatible = "fsl,sgtl5000";
|
||
|
+ reg = <0x0a>;
|
||
|
+ clocks = <&clks 201>;
|
||
|
+ VDDA-supply = <&sw4_reg>;
|
||
|
+ VDDIO-supply = <®_3p3v>;
|
||
|
+ };
|
||
|
+
|
||
|
+ hdmiin: adv7611@4c {
|
||
|
+ compatible = "adi,adv7611";
|
||
|
+ reg = <0x4c>;
|
||
|
+ };
|
||
|
+
|
||
|
+ touchscreen: egalax_ts@04 {
|
||
|
+ compatible = "eeti,egalax_ts";
|
||
|
+ reg = <0x04>;
|
||
|
+ interrupt-parent = <&gpio7>;
|
||
|
+ interrupts = <12 2>; /* gpio7_12 active low */
|
||
|
+ wakeup-gpios = <&gpio7 12 0>;
|
||
|
+ };
|
||
|
+
|
||
|
+ videoout: adv7393@2a {
|
||
|
+ compatible = "adi,adv7393";
|
||
|
+ reg = <0x2a>;
|
||
|
+ };
|
||
|
+
|
||
|
+ videoin: adv7180@20 {
|
||
|
+ compatible = "adi,adv7180";
|
||
|
+ reg = <0x20>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&iomuxc {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_hog>;
|
||
|
+
|
||
|
+ hog {
|
||
|
+ pinctrl_hog: hoggrp {
|
||
|
+ fsl,pins = <
|
||
|
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
|
||
|
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
|
||
|
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
|
||
|
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
|
||
|
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
|
||
|
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* GPS_PPS */
|
||
|
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
|
||
|
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
|
||
|
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */
|
||
|
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
|
||
|
+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
|
||
|
+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
|
||
|
+ >;
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&ldb {
|
||
|
+ status = "okay";
|
||
|
+ lvds-channel@0 {
|
||
|
+ crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&pcie {
|
||
|
+ reset-gpio = <&gpio1 29 0>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
|
||
|
+ compatible = "marvell,sky2";
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&ssi1 {
|
||
|
+ fsl,mode = "i2s-slave";
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart1 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_uart1_2>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart2 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_uart2_3>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart5 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_uart5_1>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usbotg {
|
||
|
+ vbus-supply = <®_usb_otg_vbus>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_usbotg_1>;
|
||
|
+ disable-over-current;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usbh1 {
|
||
|
+ vbus-supply = <®_usb_h1_vbus>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usdhc3 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_usdhc3_2>;
|
||
|
+ cd-gpios = <&gpio7 0 0>;
|
||
|
+ vmmc-supply = <®_3p3v>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
--- /dev/null
|
||
|
+++ b/arch/arm/boot/dts/imx6q-gw54xx.dts
|
||
|
@@ -0,0 +1,23 @@
|
||
|
+/*
|
||
|
+ * Copyright 2013 Gateworks Corporation
|
||
|
+ *
|
||
|
+ * The code contained herein is licensed under the GNU General Public
|
||
|
+ * License. You may obtain a copy of the GNU General Public License
|
||
|
+ * Version 2 or later at the following locations:
|
||
|
+ *
|
||
|
+ * http://www.opensource.org/licenses/gpl-license.html
|
||
|
+ * http://www.gnu.org/copyleft/gpl.html
|
||
|
+ */
|
||
|
+
|
||
|
+/dts-v1/;
|
||
|
+#include "imx6q.dtsi"
|
||
|
+#include "imx6qdl-gw54xx.dtsi"
|
||
|
+
|
||
|
+/ {
|
||
|
+ model = "Gateworks Ventana i.MX6 Quad GW54XX";
|
||
|
+ compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
|
||
|
+};
|
||
|
+
|
||
|
+&sata {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
--- /dev/null
|
||
|
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
|
||
|
@@ -0,0 +1,272 @@
|
||
|
+/*
|
||
|
+ * Copyright 2013 Gateworks Corporation
|
||
|
+ *
|
||
|
+ * The code contained herein is licensed under the GNU General Public
|
||
|
+ * License. You may obtain a copy of the GNU General Public License
|
||
|
+ * Version 2 or later at the following locations:
|
||
|
+ *
|
||
|
+ * http://www.opensource.org/licenses/gpl-license.html
|
||
|
+ * http://www.gnu.org/copyleft/gpl.html
|
||
|
+ */
|
||
|
+
|
||
|
+/ {
|
||
|
+ /* these are used by bootloader for disabling nodes */
|
||
|
+ aliases {
|
||
|
+ can0 = &can1;
|
||
|
+ ethernet0 = &fec;
|
||
|
+ led0 = &led0;
|
||
|
+ led1 = &led1;
|
||
|
+ nand = &gpmi;
|
||
|
+ usb0 = &usbh1;
|
||
|
+ usb1 = &usbotg;
|
||
|
+ };
|
||
|
+
|
||
|
+ chosen {
|
||
|
+ bootargs = "console=ttymxc1,115200";
|
||
|
+ };
|
||
|
+
|
||
|
+ leds {
|
||
|
+ compatible = "gpio-leds";
|
||
|
+
|
||
|
+ led0: user1 {
|
||
|
+ label = "user1";
|
||
|
+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
|
||
|
+ default-state = "on";
|
||
|
+ linux,default-trigger = "heartbeat";
|
||
|
+ };
|
||
|
+
|
||
|
+ led1: user2 {
|
||
|
+ label = "user2";
|
||
|
+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
|
||
|
+ default-state = "off";
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ memory {
|
||
|
+ reg = <0x10000000 0x20000000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ pps {
|
||
|
+ compatible = "pps-gpio";
|
||
|
+ gpios = <&gpio1 26 0>;
|
||
|
+ status = "okay";
|
||
|
+ };
|
||
|
+
|
||
|
+ regulators {
|
||
|
+ compatible = "simple-bus";
|
||
|
+
|
||
|
+ reg_3p3v: 3p3v {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "3P3V";
|
||
|
+ regulator-min-microvolt = <3300000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ reg_5p0v: 5p0v {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "5P0V";
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ reg_usb_otg_vbus: usb_otg_vbus {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "usb_otg_vbus";
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ gpio = <&gpio3 22 0>;
|
||
|
+ enable-active-high;
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&fec {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_enet_1>;
|
||
|
+ phy-mode = "rgmii";
|
||
|
+ phy-reset-gpios = <&gpio1 30 0>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&gpmi {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&i2c1 {
|
||
|
+ clock-frequency = <100000>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_i2c1_1>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ eeprom1: eeprom@50 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x50>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ eeprom2: eeprom@51 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x51>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ eeprom3: eeprom@52 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x52>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ eeprom4: eeprom@53 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x53>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ gpio: pca9555@23 {
|
||
|
+ compatible = "nxp,pca9555";
|
||
|
+ reg = <0x23>;
|
||
|
+ gpio-controller;
|
||
|
+ #gpio-cells = <2>;
|
||
|
+ };
|
||
|
+
|
||
|
+ hwmon: gsc@29 {
|
||
|
+ compatible = "gw,gsp";
|
||
|
+ reg = <0x29>;
|
||
|
+ };
|
||
|
+
|
||
|
+ rtc: ds1672@68 {
|
||
|
+ compatible = "dallas,ds1672";
|
||
|
+ reg = <0x68>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&i2c2 {
|
||
|
+ clock-frequency = <100000>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_i2c2_2>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ pmic: ltc3676@3c {
|
||
|
+ compatible = "ltc,ltc3676";
|
||
|
+ reg = <0x3c>;
|
||
|
+
|
||
|
+ regulators {
|
||
|
+ sw1_reg: ltc3676__sw1 {
|
||
|
+ regulator-min-microvolt = <1175000>;
|
||
|
+ regulator-max-microvolt = <1175000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ sw2_reg: ltc3676__sw2 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ sw3_reg: ltc3676__sw3 {
|
||
|
+ regulator-min-microvolt = <1175000>;
|
||
|
+ regulator-max-microvolt = <1175000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ sw4_reg: ltc3676__sw4 {
|
||
|
+ regulator-min-microvolt = <1500000>;
|
||
|
+ regulator-max-microvolt = <1500000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ ldo2_reg: ltc3676__ldo2 {
|
||
|
+ regulator-min-microvolt = <2500000>;
|
||
|
+ regulator-max-microvolt = <2500000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ ldo4_reg: ltc3676__ldo4 {
|
||
|
+ regulator-min-microvolt = <3000000>;
|
||
|
+ regulator-max-microvolt = <3000000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&i2c3 {
|
||
|
+ clock-frequency = <100000>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_i2c3_2>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ videoin: adv7180@20 {
|
||
|
+ compatible = "adi,adv7180";
|
||
|
+ reg = <0x20>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&iomuxc {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_hog>;
|
||
|
+
|
||
|
+ hog {
|
||
|
+ pinctrl_hog: hoggrp {
|
||
|
+ fsl,pins = <
|
||
|
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
|
||
|
+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
|
||
|
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
|
||
|
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
|
||
|
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
|
||
|
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */
|
||
|
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
|
||
|
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
|
||
|
+ >;
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&pcie {
|
||
|
+ reset-gpio = <&gpio1 0 0>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart1 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_uart1_2>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart2 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_uart2_3>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart3 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_uart3_3>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart5 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_uart5_1>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usbotg {
|
||
|
+ vbus-supply = <®_usb_otg_vbus>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_usbotg_1>;
|
||
|
+ disable-over-current;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usbh1 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
--- /dev/null
|
||
|
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
|
||
|
@@ -0,0 +1,373 @@
|
||
|
+/*
|
||
|
+ * Copyright 2013 Gateworks Corporation
|
||
|
+ *
|
||
|
+ * The code contained herein is licensed under the GNU General Public
|
||
|
+ * License. You may obtain a copy of the GNU General Public License
|
||
|
+ * Version 2 or later at the following locations:
|
||
|
+ *
|
||
|
+ * http://www.opensource.org/licenses/gpl-license.html
|
||
|
+ * http://www.gnu.org/copyleft/gpl.html
|
||
|
+ */
|
||
|
+
|
||
|
+/ {
|
||
|
+ /* these are used by bootloader for disabling nodes */
|
||
|
+ aliases {
|
||
|
+ ethernet0 = &fec;
|
||
|
+ led0 = &led0;
|
||
|
+ led1 = &led1;
|
||
|
+ led2 = &led2;
|
||
|
+ nand = &gpmi;
|
||
|
+ ssi0 = &ssi1;
|
||
|
+ usb0 = &usbh1;
|
||
|
+ usb1 = &usbotg;
|
||
|
+ usdhc2 = &usdhc3;
|
||
|
+ };
|
||
|
+
|
||
|
+ chosen {
|
||
|
+ bootargs = "console=ttymxc1,115200";
|
||
|
+ };
|
||
|
+
|
||
|
+ leds {
|
||
|
+ compatible = "gpio-leds";
|
||
|
+
|
||
|
+ led0: user1 {
|
||
|
+ label = "user1";
|
||
|
+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
|
||
|
+ default-state = "on";
|
||
|
+ linux,default-trigger = "heartbeat";
|
||
|
+ };
|
||
|
+
|
||
|
+ led1: user2 {
|
||
|
+ label = "user2";
|
||
|
+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
|
||
|
+ default-state = "off";
|
||
|
+ };
|
||
|
+
|
||
|
+ led2: user3 {
|
||
|
+ label = "user3";
|
||
|
+ gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
|
||
|
+ default-state = "off";
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ memory {
|
||
|
+ reg = <0x10000000 0x20000000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ pps {
|
||
|
+ compatible = "pps-gpio";
|
||
|
+ gpios = <&gpio1 26 0>;
|
||
|
+ status = "okay";
|
||
|
+ };
|
||
|
+
|
||
|
+ regulators {
|
||
|
+ compatible = "simple-bus";
|
||
|
+
|
||
|
+ reg_1p0v: 1p0v {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "1P0V";
|
||
|
+ regulator-min-microvolt = <1000000>;
|
||
|
+ regulator-max-microvolt = <1000000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ /* remove this fixed regulator once ltc3676__sw2 driver available */
|
||
|
+ reg_1p8v: 1p8v {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "1P8V";
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ reg_3p3v: 3p3v {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "3P3V";
|
||
|
+ regulator-min-microvolt = <3300000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ reg_5p0v: 5p0v {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "5P0V";
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ reg_usb_otg_vbus: usb_otg_vbus {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "usb_otg_vbus";
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ gpio = <&gpio3 22 0>;
|
||
|
+ enable-active-high;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ sound {
|
||
|
+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
|
||
|
+ "fsl,imx-audio-sgtl5000";
|
||
|
+ model = "imx6q-sabrelite-sgtl5000";
|
||
|
+ ssi-controller = <&ssi1>;
|
||
|
+ audio-codec = <&codec>;
|
||
|
+ audio-routing =
|
||
|
+ "MIC_IN", "Mic Jack",
|
||
|
+ "Mic Jack", "Mic Bias",
|
||
|
+ "Headphone Jack", "HP_OUT";
|
||
|
+ mux-int-port = <1>;
|
||
|
+ mux-ext-port = <4>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&audmux {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_audmux_1>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&fec {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_enet_1>;
|
||
|
+ phy-mode = "rgmii";
|
||
|
+ phy-reset-gpios = <&gpio1 30 0>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&gpmi {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&i2c1 {
|
||
|
+ clock-frequency = <100000>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_i2c1_1>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ eeprom1: eeprom@50 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x50>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ eeprom2: eeprom@51 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x51>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ eeprom3: eeprom@52 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x52>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ eeprom4: eeprom@53 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x53>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ gpio: pca9555@23 {
|
||
|
+ compatible = "nxp,pca9555";
|
||
|
+ reg = <0x23>;
|
||
|
+ gpio-controller;
|
||
|
+ #gpio-cells = <2>;
|
||
|
+ };
|
||
|
+
|
||
|
+ hwmon: gsc@29 {
|
||
|
+ compatible = "gw,gsp";
|
||
|
+ reg = <0x29>;
|
||
|
+ };
|
||
|
+
|
||
|
+ rtc: ds1672@68 {
|
||
|
+ compatible = "dallas,ds1672";
|
||
|
+ reg = <0x68>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&i2c2 {
|
||
|
+ clock-frequency = <100000>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_i2c2_2>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ pciswitch: pex8609@3f {
|
||
|
+ compatible = "plx,pex8609";
|
||
|
+ reg = <0x3f>;
|
||
|
+ };
|
||
|
+
|
||
|
+ pmic: ltc3676@3c {
|
||
|
+ compatible = "ltc,ltc3676";
|
||
|
+ reg = <0x3c>;
|
||
|
+
|
||
|
+ regulators {
|
||
|
+ sw1_reg: ltc3676__sw1 {
|
||
|
+ regulator-min-microvolt = <1175000>;
|
||
|
+ regulator-max-microvolt = <1175000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ sw2_reg: ltc3676__sw2 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ sw3_reg: ltc3676__sw3 {
|
||
|
+ regulator-min-microvolt = <1175000>;
|
||
|
+ regulator-max-microvolt = <1175000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ sw4_reg: ltc3676__sw4 {
|
||
|
+ regulator-min-microvolt = <1500000>;
|
||
|
+ regulator-max-microvolt = <1500000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ ldo2_reg: ltc3676__ldo2 {
|
||
|
+ regulator-min-microvolt = <2500000>;
|
||
|
+ regulator-max-microvolt = <2500000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ ldo3_reg: ltc3676__ldo3 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ ldo4_reg: ltc3676__ldo4 {
|
||
|
+ regulator-min-microvolt = <3000000>;
|
||
|
+ regulator-max-microvolt = <3000000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&i2c3 {
|
||
|
+ clock-frequency = <100000>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_i2c3_2>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ accelerometer: fxos8700@1e {
|
||
|
+ compatible = "fsl,fxos8700";
|
||
|
+ reg = <0x13>;
|
||
|
+ };
|
||
|
+
|
||
|
+ codec: sgtl5000@0a {
|
||
|
+ compatible = "fsl,sgtl5000";
|
||
|
+ reg = <0x0a>;
|
||
|
+ clocks = <&clks 169>;
|
||
|
+ VDDA-supply = <®_1p8v>;
|
||
|
+ VDDIO-supply = <®_3p3v>;
|
||
|
+ };
|
||
|
+
|
||
|
+ touchscreen: egalax_ts@04 {
|
||
|
+ compatible = "eeti,egalax_ts";
|
||
|
+ reg = <0x04>;
|
||
|
+ interrupt-parent = <&gpio7>;
|
||
|
+ interrupts = <12 2>; /* gpio7_12 active low */
|
||
|
+ wakeup-gpios = <&gpio7 12 0>;
|
||
|
+ };
|
||
|
+
|
||
|
+ videoin: adv7180@20 {
|
||
|
+ compatible = "adi,adv7180";
|
||
|
+ reg = <0x20>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&iomuxc {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_hog>;
|
||
|
+
|
||
|
+ hog {
|
||
|
+ pinctrl_hog: hoggrp {
|
||
|
+ fsl,pins = <
|
||
|
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
|
||
|
+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
|
||
|
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
|
||
|
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */
|
||
|
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
|
||
|
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
|
||
|
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
|
||
|
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
|
||
|
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
|
||
|
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */
|
||
|
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
|
||
|
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
|
||
|
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
|
||
|
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
|
||
|
+ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */
|
||
|
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */
|
||
|
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */
|
||
|
+ >;
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&ldb {
|
||
|
+ status = "okay";
|
||
|
+ lvds-channel@0 {
|
||
|
+ crtcs = <&ipu1 0>, <&ipu1 1>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&pcie {
|
||
|
+ reset-gpio = <&gpio1 29 0>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&ssi1 {
|
||
|
+ fsl,mode = "i2s-slave";
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart1 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_uart1_2>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart2 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_uart2_3>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart5 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_uart5_1>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usbotg {
|
||
|
+ vbus-supply = <®_usb_otg_vbus>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_usbotg_1>;
|
||
|
+ disable-over-current;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usbh1 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usdhc3 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_usdhc3_2>;
|
||
|
+ cd-gpios = <&gpio7 0 0>;
|
||
|
+ vmmc-supply = <®_3p3v>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
--- /dev/null
|
||
|
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
|
||
|
@@ -0,0 +1,429 @@
|
||
|
+/*
|
||
|
+ * Copyright 2013 Gateworks Corporation
|
||
|
+ *
|
||
|
+ * The code contained herein is licensed under the GNU General Public
|
||
|
+ * License. You may obtain a copy of the GNU General Public License
|
||
|
+ * Version 2 or later at the following locations:
|
||
|
+ *
|
||
|
+ * http://www.opensource.org/licenses/gpl-license.html
|
||
|
+ * http://www.gnu.org/copyleft/gpl.html
|
||
|
+ */
|
||
|
+
|
||
|
+/ {
|
||
|
+ /* these are used by bootloader for disabling nodes */
|
||
|
+ aliases {
|
||
|
+ can0 = &can1;
|
||
|
+ ethernet0 = &fec;
|
||
|
+ ethernet1 = ð1;
|
||
|
+ led0 = &led0;
|
||
|
+ led1 = &led1;
|
||
|
+ led2 = &led2;
|
||
|
+ nand = &gpmi;
|
||
|
+ sky2 = ð1;
|
||
|
+ ssi0 = &ssi1;
|
||
|
+ usb0 = &usbh1;
|
||
|
+ usb1 = &usbotg;
|
||
|
+ usdhc2 = &usdhc3;
|
||
|
+ };
|
||
|
+
|
||
|
+ chosen {
|
||
|
+ bootargs = "console=ttymxc1,115200";
|
||
|
+ };
|
||
|
+
|
||
|
+ leds {
|
||
|
+ compatible = "gpio-leds";
|
||
|
+
|
||
|
+ led0: user1 {
|
||
|
+ label = "user1";
|
||
|
+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
|
||
|
+ default-state = "on";
|
||
|
+ linux,default-trigger = "heartbeat";
|
||
|
+ };
|
||
|
+
|
||
|
+ led1: user2 {
|
||
|
+ label = "user2";
|
||
|
+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
|
||
|
+ default-state = "off";
|
||
|
+ };
|
||
|
+
|
||
|
+ led2: user3 {
|
||
|
+ label = "user3";
|
||
|
+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
|
||
|
+ default-state = "off";
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ memory {
|
||
|
+ reg = <0x10000000 0x40000000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ pps {
|
||
|
+ compatible = "pps-gpio";
|
||
|
+ gpios = <&gpio1 26 0>;
|
||
|
+ status = "okay";
|
||
|
+ };
|
||
|
+
|
||
|
+ regulators {
|
||
|
+ compatible = "simple-bus";
|
||
|
+
|
||
|
+ reg_1p0v: 1p0v {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "1P0V";
|
||
|
+ regulator-min-microvolt = <1000000>;
|
||
|
+ regulator-max-microvolt = <1000000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ /* remove when pmic 1p8 regulator available */
|
||
|
+ reg_1p8v: 1p8v {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "1P8V";
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ reg_3p3v: 3p3v {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "3P3V";
|
||
|
+ regulator-min-microvolt = <3300000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ reg_usb_h1_vbus: usb_h1_vbus {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "usb_h1_vbus";
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ reg_usb_otg_vbus: usb_otg_vbus {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "usb_otg_vbus";
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ gpio = <&gpio3 22 0>;
|
||
|
+ enable-active-high;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ sound {
|
||
|
+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
|
||
|
+ "fsl,imx-audio-sgtl5000";
|
||
|
+ model = "imx6q-sabrelite-sgtl5000";
|
||
|
+ ssi-controller = <&ssi1>;
|
||
|
+ audio-codec = <&codec>;
|
||
|
+ audio-routing =
|
||
|
+ "MIC_IN", "Mic Jack",
|
||
|
+ "Mic Jack", "Mic Bias",
|
||
|
+ "Headphone Jack", "HP_OUT";
|
||
|
+ mux-int-port = <1>;
|
||
|
+ mux-ext-port = <4>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&audmux {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_audmux_1>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&can1 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_flexcan1_1>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&fec {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_enet_1>;
|
||
|
+ phy-mode = "rgmii";
|
||
|
+ phy-reset-gpios = <&gpio1 30 0>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&gpmi {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&i2c1 {
|
||
|
+ clock-frequency = <100000>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_i2c1_1>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ eeprom1: eeprom@50 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x50>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ eeprom2: eeprom@51 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x51>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ eeprom3: eeprom@52 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x52>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ eeprom4: eeprom@53 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x53>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ gpio: pca9555@23 {
|
||
|
+ compatible = "nxp,pca9555";
|
||
|
+ reg = <0x23>;
|
||
|
+ gpio-controller;
|
||
|
+ #gpio-cells = <2>;
|
||
|
+ };
|
||
|
+
|
||
|
+ hwmon: gsc@29 {
|
||
|
+ compatible = "gw,gsp";
|
||
|
+ reg = <0x29>;
|
||
|
+ };
|
||
|
+
|
||
|
+ rtc: ds1672@68 {
|
||
|
+ compatible = "dallas,ds1672";
|
||
|
+ reg = <0x68>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&i2c2 {
|
||
|
+ clock-frequency = <100000>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_i2c2_2>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ pciclkgen: si53156@6b {
|
||
|
+ compatible = "sil,si53156";
|
||
|
+ reg = <0x6b>;
|
||
|
+ };
|
||
|
+
|
||
|
+ pciswitch: pex8606@3f {
|
||
|
+ compatible = "plx,pex8606";
|
||
|
+ reg = <0x3f>;
|
||
|
+ };
|
||
|
+
|
||
|
+ pmic: ltc3676@3c {
|
||
|
+ compatible = "ltc,ltc3676";
|
||
|
+ reg = <0x3c>;
|
||
|
+
|
||
|
+ regulators {
|
||
|
+ /* VDD_SOC */
|
||
|
+ sw1_reg: ltc3676__sw1 {
|
||
|
+ regulator-min-microvolt = <1175000>;
|
||
|
+ regulator-max-microvolt = <1175000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ /* VDD_1P8 */
|
||
|
+ sw2_reg: ltc3676__sw2 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ /* VDD_ARM */
|
||
|
+ sw3_reg: ltc3676__sw3 {
|
||
|
+ regulator-min-microvolt = <1175000>;
|
||
|
+ regulator-max-microvolt = <1175000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ /* VDD_DDR */
|
||
|
+ sw4_reg: ltc3676__sw4 {
|
||
|
+ regulator-min-microvolt = <1500000>;
|
||
|
+ regulator-max-microvolt = <1500000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ /* VDD_2P5 */
|
||
|
+ ldo2_reg: ltc3676__ldo2 {
|
||
|
+ regulator-min-microvolt = <2500000>;
|
||
|
+ regulator-max-microvolt = <2500000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ /* VDD_1P8 */
|
||
|
+ ldo3_reg: ltc3676__ldo3 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ /* VDD_HIGH */
|
||
|
+ ldo4_reg: ltc3676__ldo4 {
|
||
|
+ regulator-min-microvolt = <3000000>;
|
||
|
+ regulator-max-microvolt = <3000000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&i2c3 {
|
||
|
+ clock-frequency = <100000>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_i2c3_2>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ accelerometer: fxos8700@1e {
|
||
|
+ compatible = "fsl,fxos8700";
|
||
|
+ reg = <0x1e>;
|
||
|
+ };
|
||
|
+
|
||
|
+ codec: sgtl5000@0a {
|
||
|
+ compatible = "fsl,sgtl5000";
|
||
|
+ reg = <0x0a>;
|
||
|
+ clocks = <&clks 201>;
|
||
|
+ VDDA-supply = <®_1p8v>;
|
||
|
+ VDDIO-supply = <®_3p3v>;
|
||
|
+ };
|
||
|
+
|
||
|
+ hdmiin: adv7611@4c {
|
||
|
+ compatible = "adi,adv7611";
|
||
|
+ reg = <0x4c>;
|
||
|
+ };
|
||
|
+
|
||
|
+ touchscreen: egalax_ts@04 {
|
||
|
+ compatible = "eeti,egalax_ts";
|
||
|
+ reg = <0x04>;
|
||
|
+ interrupt-parent = <&gpio1>;
|
||
|
+ interrupts = <11 2>; /* gpio1_11 active low */
|
||
|
+ wakeup-gpios = <&gpio1 11 0>;
|
||
|
+ };
|
||
|
+
|
||
|
+ videoout: adv7393@2a {
|
||
|
+ compatible = "adi,adv7393";
|
||
|
+ reg = <0x2a>;
|
||
|
+ };
|
||
|
+
|
||
|
+ videoin: adv7180@20 {
|
||
|
+ compatible = "adi,adv7180";
|
||
|
+ reg = <0x20>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&iomuxc {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_hog>;
|
||
|
+
|
||
|
+ hog {
|
||
|
+ pinctrl_hog: hoggrp {
|
||
|
+ fsl,pins = <
|
||
|
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* PCIE6EXP_DIO0 */
|
||
|
+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* PCIE6EXP_DIO1 */
|
||
|
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
|
||
|
+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_SHDN */
|
||
|
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
|
||
|
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
|
||
|
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
|
||
|
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
|
||
|
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
|
||
|
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000 /* PMIC_IRQ# */
|
||
|
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x80000000 /* HUB_RST# */
|
||
|
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* PCIE_WDIS# */
|
||
|
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 /* ACCEL_IRQ# */
|
||
|
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
|
||
|
+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x80000000 /* USBOTG_OC# */
|
||
|
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
|
||
|
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
|
||
|
+ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* TOUCH_IRQ# */
|
||
|
+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_DET# */
|
||
|
+ >;
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&ldb {
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ lvds-channel@1 {
|
||
|
+ fsl,data-mapping = "spwg";
|
||
|
+ fsl,data-width = <18>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ display-timings {
|
||
|
+ native-mode = <&timing0>;
|
||
|
+ timing0: hsd100pxn1 {
|
||
|
+ clock-frequency = <65000000>;
|
||
|
+ hactive = <1024>;
|
||
|
+ vactive = <768>;
|
||
|
+ hback-porch = <220>;
|
||
|
+ hfront-porch = <40>;
|
||
|
+ vback-porch = <21>;
|
||
|
+ vfront-porch = <7>;
|
||
|
+ hsync-len = <60>;
|
||
|
+ vsync-len = <10>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&pcie {
|
||
|
+ reset-gpio = <&gpio1 29 0>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
|
||
|
+ compatible = "marvell,sky2";
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&ssi1 {
|
||
|
+ fsl,mode = "i2s-slave";
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart1 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_uart1_2>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart2 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_uart2_3>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart5 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_uart5_1>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usbotg {
|
||
|
+ vbus-supply = <®_usb_otg_vbus>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_usbotg_1>;
|
||
|
+ disable-over-current;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usbh1 {
|
||
|
+ vbus-supply = <®_usb_h1_vbus>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usdhc3 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_usdhc3_2>;
|
||
|
+ cd-gpios = <&gpio7 0 0>;
|
||
|
+ vmmc-supply = <®_3p3v>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
--- /dev/null
|
||
|
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
|
||
|
@@ -0,0 +1,457 @@
|
||
|
+/*
|
||
|
+ * Copyright 2013 Gateworks Corporation
|
||
|
+ *
|
||
|
+ * The code contained herein is licensed under the GNU General Public
|
||
|
+ * License. You may obtain a copy of the GNU General Public License
|
||
|
+ * Version 2 or later at the following locations:
|
||
|
+ *
|
||
|
+ * http://www.opensource.org/licenses/gpl-license.html
|
||
|
+ * http://www.gnu.org/copyleft/gpl.html
|
||
|
+ */
|
||
|
+
|
||
|
+/ {
|
||
|
+ /* these are used by bootloader for disabling nodes */
|
||
|
+ aliases {
|
||
|
+ can0 = &can1;
|
||
|
+ ethernet0 = &fec;
|
||
|
+ ethernet1 = ð1;
|
||
|
+ led0 = &led0;
|
||
|
+ led1 = &led1;
|
||
|
+ led2 = &led2;
|
||
|
+ nand = &gpmi;
|
||
|
+ sky2 = ð1;
|
||
|
+ ssi0 = &ssi1;
|
||
|
+ usb0 = &usbh1;
|
||
|
+ usb1 = &usbotg;
|
||
|
+ usdhc2 = &usdhc3;
|
||
|
+ };
|
||
|
+
|
||
|
+ chosen {
|
||
|
+ bootargs = "console=ttymxc1,115200";
|
||
|
+ };
|
||
|
+
|
||
|
+ leds {
|
||
|
+ compatible = "gpio-leds";
|
||
|
+
|
||
|
+ led0: user1 {
|
||
|
+ label = "user1";
|
||
|
+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
|
||
|
+ default-state = "on";
|
||
|
+ linux,default-trigger = "heartbeat";
|
||
|
+ };
|
||
|
+
|
||
|
+ led1: user2 {
|
||
|
+ label = "user2";
|
||
|
+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
|
||
|
+ default-state = "off";
|
||
|
+ };
|
||
|
+
|
||
|
+ led2: user3 {
|
||
|
+ label = "user3";
|
||
|
+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
|
||
|
+ default-state = "off";
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ memory {
|
||
|
+ reg = <0x10000000 0x40000000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ pps {
|
||
|
+ compatible = "pps-gpio";
|
||
|
+ gpios = <&gpio1 26 0>;
|
||
|
+ status = "okay";
|
||
|
+ };
|
||
|
+
|
||
|
+ regulators {
|
||
|
+ compatible = "simple-bus";
|
||
|
+
|
||
|
+ reg_1p0v: 1p0v {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "1P0V";
|
||
|
+ regulator-min-microvolt = <1000000>;
|
||
|
+ regulator-max-microvolt = <1000000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ reg_3p3v: 3p3v {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "3P3V";
|
||
|
+ regulator-min-microvolt = <3300000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ reg_usb_h1_vbus: usb_h1_vbus {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "usb_h1_vbus";
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ reg_usb_otg_vbus: usb_otg_vbus {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "usb_otg_vbus";
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ gpio = <&gpio3 22 0>;
|
||
|
+ enable-active-high;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ sound {
|
||
|
+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
|
||
|
+ "fsl,imx-audio-sgtl5000";
|
||
|
+ model = "imx6q-sabrelite-sgtl5000";
|
||
|
+ ssi-controller = <&ssi1>;
|
||
|
+ audio-codec = <&codec>;
|
||
|
+ audio-routing =
|
||
|
+ "MIC_IN", "Mic Jack",
|
||
|
+ "Mic Jack", "Mic Bias",
|
||
|
+ "Headphone Jack", "HP_OUT";
|
||
|
+ mux-int-port = <1>;
|
||
|
+ mux-ext-port = <4>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&audmux {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_audmux_1>; /* AUD4<->sgtl5000 */
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&can1 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_flexcan1_1>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&fec {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_enet_1>;
|
||
|
+ phy-mode = "rgmii";
|
||
|
+ phy-reset-gpios = <&gpio1 30 0>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&gpmi {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&i2c1 {
|
||
|
+ clock-frequency = <100000>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_i2c1_1>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ eeprom1: eeprom@50 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x50>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ eeprom2: eeprom@51 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x51>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ eeprom3: eeprom@52 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x52>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ eeprom4: eeprom@53 {
|
||
|
+ compatible = "atmel,24c02";
|
||
|
+ reg = <0x53>;
|
||
|
+ pagesize = <16>;
|
||
|
+ };
|
||
|
+
|
||
|
+ gpio: pca9555@23 {
|
||
|
+ compatible = "nxp,pca9555";
|
||
|
+ reg = <0x23>;
|
||
|
+ gpio-controller;
|
||
|
+ #gpio-cells = <2>;
|
||
|
+ };
|
||
|
+
|
||
|
+ hwmon: gsc@29 {
|
||
|
+ compatible = "gw,gsp";
|
||
|
+ reg = <0x29>;
|
||
|
+ };
|
||
|
+
|
||
|
+ rtc: ds1672@68 {
|
||
|
+ compatible = "dallas,ds1672";
|
||
|
+ reg = <0x68>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&i2c2 {
|
||
|
+ clock-frequency = <100000>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_i2c2_2>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ pmic: pfuze100@08 {
|
||
|
+ compatible = "fsl,pfuze100";
|
||
|
+ reg = <0x08>;
|
||
|
+
|
||
|
+ regulators {
|
||
|
+ sw1a_reg: sw1ab {
|
||
|
+ regulator-min-microvolt = <300000>;
|
||
|
+ regulator-max-microvolt = <1875000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-ramp-delay = <6250>;
|
||
|
+ };
|
||
|
+
|
||
|
+ sw1c_reg: sw1c {
|
||
|
+ regulator-min-microvolt = <300000>;
|
||
|
+ regulator-max-microvolt = <1875000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-ramp-delay = <6250>;
|
||
|
+ };
|
||
|
+
|
||
|
+ sw2_reg: sw2 {
|
||
|
+ regulator-min-microvolt = <800000>;
|
||
|
+ regulator-max-microvolt = <3950000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ sw3a_reg: sw3a {
|
||
|
+ regulator-min-microvolt = <400000>;
|
||
|
+ regulator-max-microvolt = <1975000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ sw3b_reg: sw3b {
|
||
|
+ regulator-min-microvolt = <400000>;
|
||
|
+ regulator-max-microvolt = <1975000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ sw4_reg: sw4 {
|
||
|
+ regulator-min-microvolt = <800000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ swbst_reg: swbst {
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5150000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ snvs_reg: vsnvs {
|
||
|
+ regulator-min-microvolt = <1000000>;
|
||
|
+ regulator-max-microvolt = <3000000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ vref_reg: vrefddr {
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ vgen1_reg: vgen1 {
|
||
|
+ regulator-min-microvolt = <800000>;
|
||
|
+ regulator-max-microvolt = <1550000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vgen2_reg: vgen2 {
|
||
|
+ regulator-min-microvolt = <800000>;
|
||
|
+ regulator-max-microvolt = <1550000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vgen3_reg: vgen3 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vgen4_reg: vgen4 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ vgen5_reg: vgen5 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ vgen6_reg: vgen6 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ pciswitch: pex8609@3f {
|
||
|
+ compatible = "plx,pex8609";
|
||
|
+ reg = <0x3f>;
|
||
|
+ };
|
||
|
+
|
||
|
+ pciclkgen: si52147@6b {
|
||
|
+ compatible = "sil,si52147";
|
||
|
+ reg = <0x6b>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&i2c3 {
|
||
|
+ clock-frequency = <100000>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_i2c3_2>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ accelerometer: fxos8700@1e {
|
||
|
+ compatible = "fsl,fxos8700";
|
||
|
+ reg = <0x1e>;
|
||
|
+ };
|
||
|
+
|
||
|
+ codec: sgtl5000@0a {
|
||
|
+ compatible = "fsl,sgtl5000";
|
||
|
+ reg = <0x0a>;
|
||
|
+ clocks = <&clks 201>;
|
||
|
+ VDDA-supply = <&sw4_reg>;
|
||
|
+ VDDIO-supply = <®_3p3v>;
|
||
|
+ };
|
||
|
+
|
||
|
+ hdmiin: adv7611@4c {
|
||
|
+ compatible = "adi,adv7611";
|
||
|
+ reg = <0x4c>;
|
||
|
+ };
|
||
|
+
|
||
|
+ touchscreen: egalax_ts@04 {
|
||
|
+ compatible = "eeti,egalax_ts";
|
||
|
+ reg = <0x04>;
|
||
|
+ interrupt-parent = <&gpio7>;
|
||
|
+ interrupts = <12 2>; /* gpio7_12 active low */
|
||
|
+ wakeup-gpios = <&gpio7 12 0>;
|
||
|
+ };
|
||
|
+
|
||
|
+ videoout: adv7393@2a {
|
||
|
+ compatible = "adi,adv7393";
|
||
|
+ reg = <0x2a>;
|
||
|
+ };
|
||
|
+
|
||
|
+ videoin: adv7180@20 {
|
||
|
+ compatible = "adi,adv7180";
|
||
|
+ reg = <0x20>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&iomuxc {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_hog>;
|
||
|
+
|
||
|
+ hog {
|
||
|
+ pinctrl_hog: hoggrp {
|
||
|
+ fsl,pins = <
|
||
|
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
|
||
|
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
|
||
|
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
|
||
|
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
|
||
|
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
|
||
|
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
|
||
|
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
|
||
|
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
|
||
|
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
|
||
|
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
|
||
|
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
|
||
|
+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
|
||
|
+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
|
||
|
+ >;
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&ldb {
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ lvds-channel@1 {
|
||
|
+ fsl,data-mapping = "spwg";
|
||
|
+ fsl,data-width = <18>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ display-timings {
|
||
|
+ native-mode = <&timing0>;
|
||
|
+ timing0: hsd100pxn1 {
|
||
|
+ clock-frequency = <65000000>;
|
||
|
+ hactive = <1024>;
|
||
|
+ vactive = <768>;
|
||
|
+ hback-porch = <220>;
|
||
|
+ hfront-porch = <40>;
|
||
|
+ vback-porch = <21>;
|
||
|
+ vfront-porch = <7>;
|
||
|
+ hsync-len = <60>;
|
||
|
+ vsync-len = <10>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&pcie {
|
||
|
+ reset-gpio = <&gpio1 29 0>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
|
||
|
+ compatible = "marvell,sky2";
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&ssi1 {
|
||
|
+ fsl,mode = "i2s-slave";
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&ssi2 {
|
||
|
+ fsl,mode = "i2s-slave";
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart1 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_uart1_2>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart2 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_uart2_3>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart5 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_uart5_1>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usbotg {
|
||
|
+ vbus-supply = <®_usb_otg_vbus>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_usbotg_1>;
|
||
|
+ disable-over-current;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usbh1 {
|
||
|
+ vbus-supply = <®_usb_h1_vbus>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usdhc3 {
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&pinctrl_usdhc3_2>;
|
||
|
+ cd-gpios = <&gpio7 0 0>;
|
||
|
+ vmmc-supply = <®_3p3v>;
|
||
|
+ status = "okay";
|
||
|
+};
|