KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/brcm63xx/image/bcm63xx.mk

1126 lines
26 KiB
Makefile
Raw Normal View History

brcm63xx: add support for the Actiontec R1000H gateway SOC: Broadcom BCM6368 (2 * Broadcom BMIPS4350 V3.1 / 400 MHz) Flash size: 32MB (split 16/16 dual boot) RAM size: 64MB Wireless: BCM432x 802.11a/b/g/n(pci) Ethernet: Broadcom BCM53115 USB: 1 x USB 2.0 Known issues: - Unable to detect 53115 switch attached to MDIO. Not supported - No support for the cable port More info on the device and the research can be found at: http://www.actiontec.com/212.html Same FCC ID as: https://wikidevi.com/wiki/Actiontec_V1000H_(Telus) Signed-off-by: Anthony Sepa <anthonysepa@yahoo.ca> [jonas.gorski: fix commit subject/message] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-19 18:27:36 +00:00
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
#
# BCM33XX/BCM63XX Profiles
#
define Device/bcm33xx
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma bin | hcs-initramfs
IMAGES :=
HCS_MAGIC_BYTES :=
HCS_REV_MIN :=
HCS_REV_MAJ :=
endef
DEVICE_VARS += HCS_MAGIC_BYTES HCS_REV_MIN HCS_REV_MAJ
define Device/bcm63xx
FILESYSTEMS := squashfs jffs2-64k jffs2-128k
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | lzma-cfe
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf
IMAGES := cfe.bin
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
IMAGE/cfe.bin := cfe-bin --pad $$$$(shell expr $$$$(FLASH_MB) / 2)
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
IMAGE/cfe-4M.bin := cfe-bin --pad 2
IMAGE/cfe-8M.bin := cfe-bin --pad 4
IMAGE/cfe-16M.bin := cfe-bin --pad 8
IMAGE/cfe-bc221.bin := cfe-bin --layoutver 5
IMAGE/cfe-old.bin := cfe-old-bin
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
IMAGE/sysupgrade.bin := cfe-bin
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
BLOCK_SIZE := 0x10000
IMAGE_OFFSET :=
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
FLASH_MB := 4
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
CFE_BOARD_ID :=
CFE_CHIP_ID :=
brcm63xx: fix image generation with offsets/blocksizes != 64K Defer the CFE_EXTRAs evaluation to allow overriden BLOCK_SIZE and IMAGE_OFFSET take effect, and replace the unused IMAGE_SIZE with IMAGE_OFFSET in DEVICE_VARS. This fixes image generation for targets using different offsets or blocksizes. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-07-09 11:10:08 +00:00
CFE_EXTRAS = --block-size $$(BLOCK_SIZE) --image-offset $$(if $$(IMAGE_OFFSET),$$(IMAGE_OFFSET),$$(BLOCK_SIZE))
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
endef
brcm63xx: fix image generation with offsets/blocksizes != 64K Defer the CFE_EXTRAs evaluation to allow overriden BLOCK_SIZE and IMAGE_OFFSET take effect, and replace the unused IMAGE_SIZE with IMAGE_OFFSET in DEVICE_VARS. This fixes image generation for targets using different offsets or blocksizes. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-07-09 11:10:08 +00:00
DEVICE_VARS += BLOCK_SIZE FLASH_MB IMAGE_OFFSET
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_VARS += CFE_BOARD_ID CFE_CHIP_ID CFE_EXTRAS
define Device/bcm63xx_netgear
$(Device/bcm63xx)
IMAGES := factory.chk sysupgrade.bin
IMAGE/factory.chk := cfe-bin | netgear-chk
NETGEAR_BOARD_ID :=
NETGEAR_REGION :=
endef
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_REGION
define Device/bcm63xx_redboot
FILESYSTEMS := squashfs
brcm63xx: Livebox 1: relocate the kernel to fix boot Fix Image generation for the Livebox 1 - missing "relocate-kernel", wrong "LOADADDR", fix it Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-29 14:03:33 +00:00
KERNEL := kernel-bin | append-dtb | relocate-kernel | gzip
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf
IMAGES := redboot.bin
IMAGE/redboot.bin := redboot-bin
REDBOOT_PREFIX := $$(IMAGE_PREFIX)
endef
DEVICE_VARS += REDBOOT_PREFIX
### Generic ###
define Device/963281TAN-generic
$(Device/bcm63xx)
IMAGES := cfe-4M.bin cfe-8M.bin cfe-16M.bin
DEVICE_TITLE := Generic 963281TAN
DEVICE_DTS := bcm963281TAN
CFE_BOARD_ID := 963281TAN
CFE_CHIP_ID := 6328
endef
TARGET_DEVICES += 963281TAN-generic
define Device/96328avng-generic
$(Device/bcm63xx)
IMAGES := cfe-4M.bin cfe-8M.bin cfe-16M.bin
DEVICE_TITLE := Generic 96328avng
DEVICE_DTS := bcm96328avng
CFE_BOARD_ID := 96328avng
CFE_CHIP_ID := 6328
endef
TARGET_DEVICES += 96328avng-generic
define Device/96338GW-generic
$(Device/bcm63xx)
DEVICE_TITLE := Generic 96338GW
DEVICE_DTS := bcm96338GW
CFE_BOARD_ID := 6338GW
CFE_CHIP_ID := 6338
endef
TARGET_DEVICES += 96338GW-generic
define Device/96338W-generic
$(Device/bcm63xx)
DEVICE_TITLE := Generic 96338W
DEVICE_DTS := bcm96338W
CFE_BOARD_ID := 6338W
CFE_CHIP_ID := 6338
endef
TARGET_DEVICES += 96338W-generic
define Device/96345GW2-generic
$(Device/bcm63xx)
IMAGES += cfe-bc221.bin
DEVICE_TITLE := Generic 96345GW2
DEVICE_DTS := bcm96345GW2
CFE_BOARD_ID := 96345GW2
CFE_CHIP_ID := 6345
endef
TARGET_DEVICES += 96345GW2-generic
define Device/96348GW-generic
$(Device/bcm63xx)
IMAGES += cfe-bc221.bin
DEVICE_TITLE := Generic 96348GW
DEVICE_DTS := bcm96348GW
CFE_BOARD_ID := 96348GW
CFE_CHIP_ID := 6348
endef
TARGET_DEVICES += 96348GW-generic
define Device/96348GW-10-generic
$(Device/bcm63xx)
DEVICE_TITLE := Generic 96348GW-10
DEVICE_DTS := bcm96348GW-10
CFE_BOARD_ID := 96348GW-10
CFE_CHIP_ID := 6348
endef
TARGET_DEVICES += 96348GW-10-generic
define Device/96348GW-11-generic
$(Device/bcm63xx)
DEVICE_TITLE := Generic 96348GW-11
DEVICE_DTS := bcm96348GW-11
CFE_BOARD_ID := 96348GW-11
CFE_CHIP_ID := 6348
endef
TARGET_DEVICES += 96348GW-11-generic
define Device/96348R-generic
$(Device/bcm63xx)
DEVICE_TITLE := Generic 96348R
DEVICE_DTS := bcm96348R
CFE_BOARD_ID := 96348R
CFE_CHIP_ID := 6348
endef
TARGET_DEVICES += 96348R-generic
define Device/96358VW-generic
$(Device/bcm63xx)
DEVICE_TITLE := Generic 96358VW
DEVICE_DTS := bcm96358VW
CFE_BOARD_ID := 96358VW
CFE_CHIP_ID := 6358
endef
TARGET_DEVICES += 96358VW-generic
define Device/96358VW2-generic
$(Device/bcm63xx)
DEVICE_TITLE := Generic 96358VW2
DEVICE_DTS := bcm96358VW2
CFE_BOARD_ID := 96358VW2
CFE_CHIP_ID := 6358
endef
TARGET_DEVICES += 96358VW2-generic
define Device/96368MVNgr-generic
$(Device/bcm63xx)
DEVICE_TITLE := Generic 96368MVNgr
DEVICE_DTS := bcm96368MVNgr
CFE_BOARD_ID := 96368MVNgr
CFE_CHIP_ID := 6368
endef
TARGET_DEVICES += 96368MVNgr-generic
define Device/96368MVWG-generic
$(Device/bcm63xx)
DEVICE_TITLE := Generic 96368MVWG
DEVICE_DTS := bcm96368MVWG
CFE_BOARD_ID := 96368MVWG
CFE_CHIP_ID := 6368
endef
TARGET_DEVICES += 96368MVWG-generic
brcm63xx: add support for the Actiontec R1000H gateway SOC: Broadcom BCM6368 (2 * Broadcom BMIPS4350 V3.1 / 400 MHz) Flash size: 32MB (split 16/16 dual boot) RAM size: 64MB Wireless: BCM432x 802.11a/b/g/n(pci) Ethernet: Broadcom BCM53115 USB: 1 x USB 2.0 Known issues: - Unable to detect 53115 switch attached to MDIO. Not supported - No support for the cable port More info on the device and the research can be found at: http://www.actiontec.com/212.html Same FCC ID as: https://wikidevi.com/wiki/Actiontec_V1000H_(Telus) Signed-off-by: Anthony Sepa <anthonysepa@yahoo.ca> [jonas.gorski: fix commit subject/message] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-02-19 18:27:36 +00:00
### Actiontec ###
define Device/R1000H
$(Device/bcm63xx)
FILESYSTEMS := squashfs
DEVICE_TITLE := Actiontec R1000H
DEVICE_DTS := r1000h
CFE_BOARD_ID := 96368MVWG
CFE_CHIP_ID := 6368
FLASH_MB := 32
IMAGE_OFFSET := 0x20000
DEVICE_PACKAGES := \
$(USB2_PACKAGES) $(BRCMWL_PACKAGES)
endef
TARGET_DEVICES += R1000H
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
### ADB ###
define Device/A4001N
$(Device/bcm63xx)
DEVICE_TITLE := ADB P.DG A4001N
DEVICE_DTS := a4001n
CFE_BOARD_ID := 96328dg2x2
CFE_CHIP_ID := 6328
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
FLASH_MB := 8
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(USB2_PACKAGES) $(B43_PACKAGES)
endef
TARGET_DEVICES += A4001N
define Device/A4001N1
$(Device/bcm63xx)
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
IMAGES += sysupgrade.bin
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_TITLE := ADB P.DG A4001N1
DEVICE_DTS := a4001n1
CFE_BOARD_ID := 963281T_TEF
CFE_CHIP_ID := 6328
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
FLASH_MB := 16
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(USB2_PACKAGES) $(B43_PACKAGES)
endef
TARGET_DEVICES += A4001N1
brcm63xx: add support for Pirelli/ADB P.DG AV4202N This patch adds support for the ADB P.DG AV4202N aka Pirelli PRG AV4202N. Signed-off-by: Paul Wassi <p.wassi@gmx.at> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-12-23 23:24:44 +00:00
define Device/AV4202N
$(Device/bcm63xx)
IMAGE_OFFSET := 0x20000
DEVICE_TITLE := ADB P.DG AV4202N
DEVICE_DTS := av4202n
CFE_BOARD_ID := 96368_Swiss_S1
CFE_CHIP_ID := 6368
DEVICE_PACKAGES := \
$(USB2_PACKAGES) $(B43_PACKAGES)
endef
TARGET_DEVICES += AV4202N
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
### Alcatel ###
define Device/RG100A
$(Device/bcm63xx)
DEVICE_TITLE := Alcatel RG100A
DEVICE_DTS := rg100a
CFE_BOARD_ID := 96358VW2
CFE_CHIP_ID := 6358
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
BLOCK_SIZE := 0x20000
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(USB2_PACKAGES) $(B43_PACKAGES)
endef
TARGET_DEVICES += RG100A
### Asmax ###
define Device/AR1004G
$(Device/bcm63xx)
DEVICE_TITLE := Asmax AR 1004g
brcm63xx: fix invalid Asmax AR 1004g DTS reference Build profile for Asmax AR 1004g refers to an invalid DTS "rg100a". The correct DTS for this device is "ar1004g". Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
2017-04-21 00:36:18 +00:00
DEVICE_DTS := ar1004g
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
CFE_BOARD_ID := 96348GW-10
CFE_CHIP_ID := 6348
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += AR1004G
### Belkin ###
define Device/F5D7633
$(Device/bcm63xx)
DEVICE_TITLE := Belkin F5D7633
DEVICE_DTS := f5d7633
CFE_BOARD_ID := 96348GW-10
CFE_CHIP_ID := 6348
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
BLOCK_SIZE := 0x20000
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += F5D7633
### Broadcom ###
define Device/BCM96318REF
$(Device/bcm63xx)
IMAGES :=
DEVICE_TITLE := Broadcom BCM96318REF reference board
DEVICE_DTS := bcm96318ref
CFE_BOARD_ID := 96318REF
CFE_CHIP_ID := 6318
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES) \
kmod-bcm63xx-udc
endef
TARGET_DEVICES += BCM96318REF
define Device/BCM96318REF_P300
$(Device/bcm63xx)
IMAGES :=
DEVICE_TITLE := Broadcom BCM96318REF_P300 reference board
DEVICE_DTS := bcm96318ref_p300
CFE_BOARD_ID := 96318REF_P300
CFE_CHIP_ID := 6318
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES) \
kmod-bcm63xx-udc
endef
TARGET_DEVICES += BCM96318REF_P300
define Device/BCM963268BU_P300
$(Device/bcm63xx)
IMAGES :=
DEVICE_TITLE := Broadcom BCM963268BU_P300 reference board
DEVICE_DTS := bcm963268bu_p300
CFE_BOARD_ID := 963268BU_P300
CFE_CHIP_ID := 63268
DEVICE_PACKAGES := \
$(USB2_PACKAGES) \
kmod-bcm63xx-udc
endef
TARGET_DEVICES += BCM963268BU_P300
define Device/BCM963269BHR
$(Device/bcm63xx)
IMAGES :=
DEVICE_TITLE := Broadcom BCM963269BHR reference board
DEVICE_DTS := bcm963269bhr
CFE_BOARD_ID := 963269BHR
CFE_CHIP_ID := 63268
DEVICE_PACKAGES := \
$(USB2_PACKAGES) \
kmod-bcm63xx-udc
endef
TARGET_DEVICES += BCM963269BHR
### BT ###
define Device/HomeHub2A
$(Device/bcm63xx)
DEVICE_TITLE := BT Home Hub 2.0 A
DEVICE_DTS := homehub2a
CFE_BOARD_ID := HOMEHUB2A
CFE_CHIP_ID := 6358
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
BLOCK_SIZE := 0x20000
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += HomeHub2A
define Device/BTV2110
$(Device/bcm63xx)
DEVICE_TITLE := BT Voyager V2110
DEVICE_DTS := v2110
CFE_BOARD_ID := V2110
CFE_CHIP_ID := 6348
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --layoutver 5
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += BTV2110
define Device/BTV2500V
$(Device/bcm63xx)
DEVICE_TITLE := BT Voyager V2500V
DEVICE_DTS := v2500v-bb
CFE_BOARD_ID := V2500V_BB
CFE_CHIP_ID := 6348
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --layoutver 5
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += BTV2500V
### Comtrend ###
define Device/AR5381u
$(Device/bcm63xx)
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
IMAGES += sysupgrade.bin
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_TITLE := Comtrend AR-5381u
DEVICE_DTS := ar-5381u
CFE_BOARD_ID := 96328A-1241N
CFE_CHIP_ID := 6328
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
FLASH_MB := 16
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += AR5381u
define Device/AR5387un
$(Device/bcm63xx)
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
IMAGES += sysupgrade.bin
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_TITLE := Comtrend AR-5387un
DEVICE_DTS := ar-5387un
CFE_BOARD_ID := 96328A-1441N1
CFE_CHIP_ID := 6328
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
FLASH_MB := 16
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += AR5387un
define Device/CT-536_CT-5621
$(Device/bcm63xx)
DEVICE_TITLE := Comtrend CT-536+/CT-5621
DEVICE_DTS := ct536plus
CFE_BOARD_ID := 96348GW-11
CFE_CHIP_ID := 6348
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += CT-536_CT-5621
define Device/CT-5365
$(Device/bcm63xx)
DEVICE_TITLE := Comtrend CT-5365
DEVICE_DTS := ct-5365
CFE_BOARD_ID := 96348A-122
CFE_CHIP_ID := 6348
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += CT-5365
define Device/CT-6373
$(Device/bcm63xx)
DEVICE_TITLE := Comtrend CT-6373
DEVICE_DTS := ct-6373
CFE_BOARD_ID := CT6373-1
CFE_CHIP_ID := 6358
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += CT-6373
define Device/VR-3025u
$(Device/bcm63xx)
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
IMAGES += sysupgrade.bin
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_TITLE := Comtrend VR-3025u
DEVICE_DTS := vr-3025u
CFE_BOARD_ID := 96368M-1541N
CFE_CHIP_ID := 6368
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
BLOCK_SIZE := 0x20000
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
FLASH_MB := 32
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += VR-3025u
define Device/VR-3025un
$(Device/bcm63xx)
DEVICE_TITLE := Comtrend VR-3025un
DEVICE_DTS := vr-3025un
CFE_BOARD_ID := 96368M-1341N
CFE_CHIP_ID := 6368
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
FLASH_MB := 8
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += VR-3025un
define Device/VR-3026e
$(Device/bcm63xx)
DEVICE_TITLE := Comtrend VR-3026e
DEVICE_DTS := vr-3026e
CFE_BOARD_ID := 96368MT-1341N1
CFE_CHIP_ID := 6368
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
FLASH_MB := 8
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += VR-3026e
define Device/WAP-5813n
$(Device/bcm63xx)
DEVICE_TITLE := Comtrend WAP-5813n
DEVICE_DTS := wap-5813n
CFE_BOARD_ID := 96369R-1231N
CFE_CHIP_ID := 6368
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
FLASH_MB := 8
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += WAP-5813n
### D-Link ###
define Device/DSL2640B-B
$(Device/bcm63xx)
DEVICE_TITLE := D-Link DSL-2640B rev B2
DEVICE_DTS := dsl-2640b-b
CFE_BOARD_ID := D-4P-W
CFE_CHIP_ID := 6348
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += DSL2640B-B
define Device/DSL2640U
$(Device/bcm63xx)
DEVICE_TITLE := D-Link DSL-2640U/BRU/C
DEVICE_DTS := dsl-2640u
CFE_BOARD_ID := 96338W2_E7T
CFE_CHIP_ID := 6338
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += DSL2640U
define Device/DSL2650U
$(Device/bcm63xx)
DEVICE_TITLE := D-Link DSL-2650U
DEVICE_DTS := dsl-2650u
CFE_BOARD_ID := 96358VW2
CFE_CHIP_ID := 6358
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += DSL2650U
define Device/DSL274XB-C2
$(Device/bcm63xx)
DEVICE_TITLE := D-Link DSL-2740B/DSL-2741B rev C2
DEVICE_DTS := dsl-274xb-c
CFE_BOARD_ID := 96358GW
CFE_CHIP_ID := 6358
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += DSL274XB-C2
define Device/DSL274XB-C3
$(Device/bcm63xx)
DEVICE_TITLE := D-Link DSL-2740B/DSL-2741B rev C3
DEVICE_DTS := dsl-274xb-c
CFE_BOARD_ID := AW4139
CFE_CHIP_ID := 6358
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += DSL274XB-C3
brcm63xx: merge DSL-274X-F1 profiles The only difference is a field in the image tag header, so just define two images for it instead of treating them as separate devices. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-18 11:38:46 +00:00
define Device/DSL274XB-F1
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
$(Device/bcm63xx)
brcm63xx: merge DSL-274X-F1 profiles The only difference is a field in the image tag header, so just define two images for it instead of treating them as separate devices. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-18 11:38:46 +00:00
DEVICE_TITLE := D-Link DSL-2740B/DSL-2741B rev F1
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_DTS := dsl-274xb-f
CFE_BOARD_ID := AW4339U
CFE_CHIP_ID := 6328
brcm63xx: merge DSL-274X-F1 profiles The only difference is a field in the image tag header, so just define two images for it instead of treating them as separate devices. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-18 11:38:46 +00:00
IMAGES := cfe-EU.bin cfe-AU.bin
IMAGE/cfe-AU.bin := cfe-bin --signature2 "4.06.01.AUF1" --pad 4
IMAGE/cfe-EU.bin := cfe-bin --signature2 "4.06.01.EUF1" --pad 4
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(ATH9K_PACKAGES)
endef
brcm63xx: merge DSL-274X-F1 profiles The only difference is a field in the image tag header, so just define two images for it instead of treating them as separate devices. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-18 11:38:46 +00:00
TARGET_DEVICES += DSL274XB-F1
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
define Device/DSL275XB-D1
$(Device/bcm63xx)
DEVICE_TITLE := D-Link DSL-2750B/DSL-2751 rev D1
DEVICE_DTS := dsl-275xb-d
CFE_BOARD_ID := AW5200B
CFE_CHIP_ID := 6318
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
FLASH_MB := 8
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += DSL275XB-D1
define Device/DVAG3810BN
$(Device/bcm63xx)
DEVICE_TITLE := D-Link DVA-G3810BN/TL
DEVICE_DTS := dva-g3810bn_tl
CFE_BOARD_ID := 96358VW
CFE_CHIP_ID := 6358
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += DVAG3810BN
### Davolink ###
define Device/DV-201AMR
$(Device/bcm63xx)
IMAGES := cfe-old.bin
DEVICE_TITLE := Davolink DV-201AMR
DEVICE_DTS := dv-201amr
CFE_BOARD_ID := DV201AMR
CFE_CHIP_ID := 6348
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += DV-201AMR
### Dynalink ###
define Device/RTA770BW
$(Device/bcm63xx)
IMAGES =
DEVICE_TITLE := Dynalink RTA770BW (Siemens SE 515)
DEVICE_DTS := rta770bw
CFE_BOARD_ID := RTA770BW
CFE_CHIP_ID := 6345
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --layoutver 5
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += RTA770BW
define Device/RTA770W
$(Device/bcm63xx)
IMAGES =
DEVICE_TITLE := Dynalink RTA770W
DEVICE_DTS := rta770w
CFE_BOARD_ID := RTA770W
CFE_CHIP_ID := 6345
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --layoutver 5
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += RTA770W
define Device/RTA1025W_16
$(Device/bcm63xx)
DEVICE_TITLE := Dynalink RTA1025W
DEVICE_DTS := rta1025w
CFE_BOARD_ID := RTA1025W_16
CFE_CHIP_ID := 6348
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --layoutver 5
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += RTA1025W_16
define Device/RTA1320_16M
$(Device/bcm63xx)
DEVICE_TITLE := Dynalink RTA1320
DEVICE_DTS := rta1320
CFE_BOARD_ID := RTA1320_16M
CFE_CHIP_ID := 6338
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --layoutver 5
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
endef
TARGET_DEVICES += RTA1320_16M
### Huawei ###
define Device/HG520v
$(Device/bcm63xx)
DEVICE_TITLE := Huawei EchoLife HG520v
DEVICE_DTS := hg520v
CFE_BOARD_ID := HW6358GW_B
CFE_CHIP_ID := 6358
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --rsa-signature "EchoLife_HG520v"
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += HG520v
define Device/HG553
$(Device/bcm63xx)
DEVICE_TITLE := Huawei EchoLife HG553
DEVICE_DTS := hg553
CFE_BOARD_ID := HW553
CFE_CHIP_ID := 6358
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --rsa-signature "EchoLife_HG553" --tag-version 7
BLOCK_SIZE := 0x20000
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += HG553
define Device/HG556a-A
$(Device/bcm63xx)
DEVICE_TITLE := Huawei EchoLife HG556a rev A
DEVICE_DESCRIPTION = Build firmware images for Huawei HG556a version A (Atheros)
DEVICE_DTS := hg556a-a
CFE_BOARD_ID := HW556
CFE_CHIP_ID := 6358
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --rsa-signature "EchoLife_HG556a" --tag-version 8
IMAGE_OFFSET := 0x20000
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(ATH9K_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += HG556a-A
define Device/HG556a-B
$(Device/bcm63xx)
DEVICE_TITLE := Huawei EchoLife HG556a rev B
DEVICE_DESCRIPTION = Build firmware images for Huawei HG556a version B (Atheros)
DEVICE_DTS := hg556a-b
CFE_BOARD_ID := HW556
CFE_CHIP_ID := 6358
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --rsa-signature "EchoLife_HG556a" --tag-version 8
BLOCK_SIZE := 0x20000
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(ATH9K_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += HG556a-B
define Device/HG556a-C
$(Device/bcm63xx)
DEVICE_TITLE := Huawei EchoLife HG556a rev C
brcm63xx: fix typo image/Makefile This typo was introduced in c6990347 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-05 13:42:27 +00:00
DEVICE_DESCRIPTION = Build firmware images for Huawei HG556a version C (Ralink)
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_DTS := hg556a-c
CFE_BOARD_ID := HW556
CFE_CHIP_ID := 6358
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --rsa-signature "EchoLife_HG556a" --tag-version 8
BLOCK_SIZE := 0x20000
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(RT28_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += HG556a-C
define Device/HG622
$(Device/bcm63xx)
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
IMAGES += sysupgrade.bin
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_TITLE := Huawei EchoLife HG622
DEVICE_DTS := hg622
CFE_BOARD_ID := 96368MVWG_hg622
CFE_CHIP_ID := 6368
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --tag-version 7
BLOCK_SIZE := 0x20000
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
FLASH_MB := 16
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(RT28_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += HG622
define Device/HG655b
$(Device/bcm63xx)
DEVICE_TITLE := Huawei EchoLife HG655b
DEVICE_DTS := hg655b
CFE_BOARD_ID := HW65x
CFE_CHIP_ID := 6368
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --tag-version 7
IMAGE_OFFSET := 0x20000
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
FLASH_MB := 8
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(RT28_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += HG655b
### Inteno ###
define Device/VG50
$(Device/bcm63xx)
IMAGES :=
DEVICE_TITLE := Inteno VG50 Multi-WAN CPE
DEVICE_DTS := vg50
CFE_BOARD_ID := VW6339GU
CFE_CHIP_ID := 63268
DEVICE_PACKAGES := \
$(USB2_PACKAGES)
endef
TARGET_DEVICES += VG50
### Inventel ###
define Device/livebox
$(Device/bcm63xx_redboot)
DEVICE_TITLE := Inventel Livebox 1
DEVICE_DTS := livebox-blue-5g
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB1_PACKAGES)
endef
TARGET_DEVICES += livebox
### Netgear ###
define Device/CVG834G
$(Device/bcm33xx)
DEVICE_TITLE := Netgear CVG834G
DEVICE_DTS := cvg834g
HCS_MAGIC_BYTES := 0xa020
HCS_REV_MIN := 0001
HCS_REV_MAJ := 0022
endef
TARGET_DEVICES += CVG834G
define Device/DG834GT_PN
$(Device/bcm63xx)
DEVICE_TITLE := Netgear DG834GT/PN
DEVICE_DTS := dg834gtpn
CFE_BOARD_ID := 96348GW-10
CFE_CHIP_ID := 6348
DEVICE_PACKAGES := \
$(ATH5K_PACKAGES)
endef
TARGET_DEVICES += DG834GT_PN
define Device/DG834GTv4
$(Device/bcm63xx)
IMAGES :=
DEVICE_TITLE := Netgear DG834G v4
DEVICE_DTS := dg834g_v4
CFE_BOARD_ID := 96348W3
CFE_CHIP_ID := 6348
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += DG834GTv4
define Device/DGND3700v1
$(Device/bcm63xx_netgear)
IMAGES := factory.chk sysupgrade.bin
DEVICE_TITLE := Netgear DGND3700 v1
DEVICE_DTS := dgnd3700v1
CFE_BOARD_ID := 96368MVWG
CFE_CHIP_ID := 6368
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
BLOCK_SIZE := 0x20000
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
NETGEAR_BOARD_ID := U12L144T01_NETGEAR_NEWLED
NETGEAR_REGION := 1
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += DGND3700v1
define Device/DGND3800B
$(Device/bcm63xx_netgear)
IMAGES := factory.chk sysupgrade.bin
DEVICE_TITLE := Netgear DGND3800B
DEVICE_DTS := dgnd3700v1
CFE_BOARD_ID := 96368MVWG
CFE_CHIP_ID := 6368
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
BLOCK_SIZE := 0x20000
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
NETGEAR_BOARD_ID := U12L144T11_NETGEAR_NEWLED
NETGEAR_REGION := 1
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += DGND3800B
brcm63xx: add initial support for Netgear EVG2000 This patch adds support for the Netgear EVG2000 VoIP Gateway to the bcm63xx targets. This device was not sold to the general public, but rather is/was provided by telcos to customers in Sweden, Australia, Singapore and other parts of asia. Known issues: - Unable to detect 53115 switch. This appear to be a problem with probing for the PHY using MDIO and results in error 5. Doesn't seem to be a problem with the configuration, and could use someone with experience to have a look at it. - Uses the b43 driver as using the OpenWRT/LEDE broadcom-wl driver fails to load the firmware for the 4322, so 802.11n is not supported. More info on the device and the research can be found at: https://wiki.openwrt.org/toh/netgear/evg2000 https://wikidevi.com/wiki/Netgear_EVG2000 https://github.com/Xotic750/mirror-lede/tree/evg2000 https://forum.openwrt.org/viewtopic.php?id=63950 Signed-off-by: Graham Fairweather <xotic750@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-22 22:56:23 +00:00
define Device/EVG2000
$(Device/bcm63xx_netgear)
IMAGES := factory.chk sysupgrade.bin
DEVICE_TITLE := Netgear EVG2000
DEVICE_DTS := evg2000
CFE_BOARD_ID := 96369PVG
CFE_CHIP_ID := 6368
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
BLOCK_SIZE := 0x20000
brcm63xx: add initial support for Netgear EVG2000 This patch adds support for the Netgear EVG2000 VoIP Gateway to the bcm63xx targets. This device was not sold to the general public, but rather is/was provided by telcos to customers in Sweden, Australia, Singapore and other parts of asia. Known issues: - Unable to detect 53115 switch. This appear to be a problem with probing for the PHY using MDIO and results in error 5. Doesn't seem to be a problem with the configuration, and could use someone with experience to have a look at it. - Uses the b43 driver as using the OpenWRT/LEDE broadcom-wl driver fails to load the firmware for the 4322, so 802.11n is not supported. More info on the device and the research can be found at: https://wiki.openwrt.org/toh/netgear/evg2000 https://wikidevi.com/wiki/Netgear_EVG2000 https://github.com/Xotic750/mirror-lede/tree/evg2000 https://forum.openwrt.org/viewtopic.php?id=63950 Signed-off-by: Graham Fairweather <xotic750@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-22 22:56:23 +00:00
NETGEAR_BOARD_ID := U12H154T90_NETGEAR
NETGEAR_REGION := 1
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += EVG2000
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
### NuCom ###
define Device/R5010UNv2
$(Device/bcm63xx)
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
IMAGES += sysupgrade.bin
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_TITLE := NuCom R5010UN v2
DEVICE_DTS := r5010unv2
CFE_BOARD_ID := 96328ang
CFE_CHIP_ID := 6328
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
FLASH_MB := 16
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += R5010UNv2
brcm63xx: Add Observa VH4032N support Add support for the Observa Telecom VH4032N router. This is another BCM6368 router, 128 MB RAM, 32MB flash and 3 USB host ports. The wifi chip is an onboard Broadcom BCM43222. Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> [jonas.gorski: use gpio-hog instead of abusing ephy-reset] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-12-03 14:51:05 +00:00
### Observa ###
define Device/VH4032N
$(Device/bcm63xx)
IMAGES += sysupgrade.bin
DEVICE_TITLE := Observa VH4032N
DEVICE_DTS := vh4032n
CFE_BOARD_ID := 96368VVW
CFE_CHIP_ID := 6368
BLOCK_SIZE := 0x20000
FLASH_MB := 32
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += VH4032N
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
### Pirelli ###
define Device/A226G
$(Device/bcm63xx)
DEVICE_TITLE := Pirelli A226G
DEVICE_DTS := a226g
CFE_BOARD_ID := DWV-S0
CFE_CHIP_ID := 6358
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --signature2 IMAGE --tag-version 8
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += A226G
define Device/A226M
$(Device/bcm63xx)
DEVICE_TITLE := Pirelli A226M
DEVICE_DTS := a226m
CFE_BOARD_ID := DWV-S0
CFE_CHIP_ID := 6358
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --signature2 IMAGE --tag-version 8
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(USB2_PACKAGES)
endef
TARGET_DEVICES += A226M
define Device/A226M-FWB
$(Device/bcm63xx)
DEVICE_TITLE := Pirelli A226M-FWB
DEVICE_DTS := a226m-fwb
CFE_BOARD_ID := DWV-S0
CFE_CHIP_ID := 6358
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --signature2 IMAGE --tag-version 8
BLOCK_SIZE := 0x20000
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(USB2_PACKAGES)
endef
TARGET_DEVICES += A226M-FWB
define Device/AGPF-S0
$(Device/bcm63xx)
DEVICE_TITLE := Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
DEVICE_DTS := agpf-s0
CFE_BOARD_ID := AGPF-S0
CFE_CHIP_ID := 6358
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --signature2 IMAGE --tag-version 8
BLOCK_SIZE := 0x20000
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += AGPF-S0
### Sagem ###
define Device/FAST2404
$(Device/bcm63xx)
DEVICE_TITLE := Sagem F@ST2404
DEVICE_DTS := fast2404
CFE_BOARD_ID := F@ST2404
CFE_CHIP_ID := 6348
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += FAST2404
define Device/FAST2504n
$(Device/bcm63xx)
DEVICE_TITLE := Sagem F@ST2504n
DEVICE_DTS := fast2504n
CFE_BOARD_ID := F@ST2504n
CFE_CHIP_ID := 6362
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += FAST2504n
define Device/FAST2604
$(Device/bcm63xx)
DEVICE_TITLE := Sagem F@ST2604
DEVICE_DTS := fast2604
CFE_BOARD_ID := F@ST2604
CFE_CHIP_ID := 6348
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += FAST2604
define Device/FAST2704N
$(Device/bcm63xx)
DEVICE_TITLE := Sagem F@ST2704N
DEVICE_DTS := fast2704n
CFE_BOARD_ID := F@ST2704N
CFE_CHIP_ID := 6318
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
FLASH_MB := 8
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += FAST2704N
define Device/FAST2704V2
$(Device/bcm63xx)
DEVICE_TITLE := Sagem F@ST2704V2
DEVICE_DTS := fast2704v2
CFE_BOARD_ID := F@ST2704V2
CFE_CHIP_ID := 6328
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
FLASH_MB := 8
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += FAST2704V2
### SFR ###
define Device/NEUFBOX4-SER
$(Device/bcm63xx)
DEVICE_TITLE := SFR Neufbox4 (Sercomm)
DEVICE_DTS := nb4-ser-r0
CFE_BOARD_ID := 96358VW
CFE_CHIP_ID := 6358
brcm63xx: image: trim revision code used for --rsa-signature The imagetag RSA signature field may not exceed 20 characters, so trim the Git hash portion from the REVISION variable in order to ensure that the resulting string fits within this field. The current revision values may be longer than 20 chars, especially when building within a dirty tree. In this case, the revision will look like "r2435+75-b4aa3c8" which, combined with the "LEDE-" prefix, is 21 chars long. Fixes the following error spotted by the buildbots: Error: RSA Signature (rsa_signature,r) too long. make[4]: *** [.../lede-brcm63xx-generic-NEUFBOX6-squashfs-cfe.bin] Error 1 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-14 16:10:52 +00:00
CFE_EXTRAS += --rsa-signature "LEDE-$(firstword $(subst -,$(space),$(REVISION)))"
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += NEUFBOX4-SER
define Device/NEUFBOX4-FXC
$(Device/bcm63xx)
DEVICE_TITLE := SFR Neufbox4 (Foxconn)
DEVICE_DTS := nb4-fxc-r1
CFE_BOARD_ID := 96358VW
CFE_CHIP_ID := 6358
brcm63xx: image: trim revision code used for --rsa-signature The imagetag RSA signature field may not exceed 20 characters, so trim the Git hash portion from the REVISION variable in order to ensure that the resulting string fits within this field. The current revision values may be longer than 20 chars, especially when building within a dirty tree. In this case, the revision will look like "r2435+75-b4aa3c8" which, combined with the "LEDE-" prefix, is 21 chars long. Fixes the following error spotted by the buildbots: Error: RSA Signature (rsa_signature,r) too long. make[4]: *** [.../lede-brcm63xx-generic-NEUFBOX6-squashfs-cfe.bin] Error 1 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-14 16:10:52 +00:00
CFE_EXTRAS += --rsa-signature "LEDE-$(firstword $(subst -,$(space),$(REVISION)))"
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += NEUFBOX4-FXC
define Device/NEUFBOX6
$(Device/bcm63xx)
DEVICE_TITLE := SFR Neufbox6
DEVICE_DTS := nb6-ser-r0
CFE_BOARD_ID := NB6-SER-r0
CFE_CHIP_ID := 6362
brcm63xx: image: trim revision code used for --rsa-signature The imagetag RSA signature field may not exceed 20 characters, so trim the Git hash portion from the REVISION variable in order to ensure that the resulting string fits within this field. The current revision values may be longer than 20 chars, especially when building within a dirty tree. In this case, the revision will look like "r2435+75-b4aa3c8" which, combined with the "LEDE-" prefix, is 21 chars long. Fixes the following error spotted by the buildbots: Error: RSA Signature (rsa_signature,r) too long. make[4]: *** [.../lede-brcm63xx-generic-NEUFBOX6-squashfs-cfe.bin] Error 1 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-14 16:10:52 +00:00
CFE_EXTRAS += --rsa-signature "LEDE-$(firstword $(subst -,$(space),$(REVISION)))"
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += NEUFBOX6
### T-Com ###
define Device/SPW303V
$(Device/bcm63xx)
IMAGES := factory.bin sysupgrade.bin
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
IMAGE/factory.bin := cfe-spw303v-bin --pad 4 | spw303v-bin | xor-image
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
IMAGE/sysupgrade.bin := cfe-spw303v-bin | spw303v-bin
DEVICE_TITLE := T-Com Speedport W 303V
DEVICE_DTS := spw303v
CFE_BOARD_ID := 96358-502V
CFE_CHIP_ID := 6358
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += SPW303V
define Device/SPW500V
$(Device/bcm63xx)
DEVICE_TITLE := T-Com Speedport W 500V
DEVICE_DTS := spw500v
CFE_BOARD_ID := 96348GW
CFE_CHIP_ID := 6348
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += SPW500V
### Tecom ###
define Device/GW6000
$(Device/bcm63xx)
DEVICE_TITLE := Tecom GW6000
DEVICE_DTS := gw6000
CFE_BOARD_ID := 96348GW
CFE_CHIP_ID := 6348
DEVICE_PACKAGES := \
$(BRCMWL_PACKAGES) $(USB1_PACKAGES)
endef
TARGET_DEVICES += GW6000
define Device/GW6200
$(Device/bcm63xx)
DEVICE_TITLE := Tecom GW6200
DEVICE_DTS := gw6200
CFE_BOARD_ID := 96348GW
CFE_CHIP_ID := 6348
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --rsa-signature "$(shell printf '\x99')"
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(BRCMWL_PACKAGES) $(USB1_PACKAGES)
endef
TARGET_DEVICES += GW6200
### Telsey ###
brcm63xx: CPVA502+: fix image generation Fix typo, erase pointless option and allow to build the image. Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
2017-02-14 15:36:55 +00:00
define Device/CPVA502PLUS
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
$(Device/bcm63xx)
DEVICE_TITLE := Telsey CPVA502+
DEVICE_DTS := cpva502plus
CFE_BOARD_ID := CPVA502+
CFE_CHIP_ID := 6348
brcm63xx: CPVA502+: fix image generation Fix typo, erase pointless option and allow to build the image. Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
2017-02-14 15:36:55 +00:00
CFE_EXTRAS += --signature "Telsey Tlc" --signature2 "99.99.999"
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
brcm63xx: CPVA502+: fix image generation Fix typo, erase pointless option and allow to build the image. Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
2017-02-14 15:36:55 +00:00
TARGET_DEVICES += CPVA502PLUS
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
define Device/CPA-ZNTE60T
$(Device/bcm63xx)
DEVICE_TITLE := Telsey CPVA642-type (CPA-ZNTE60T)
DEVICE_DTS := cpva642
CFE_BOARD_ID := CPVA642
CFE_CHIP_ID := 6358
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --signature "Telsey Tlc" --signature2 "99.99.999" --second-image-flag "0"
brcm63xx: add sysupgrade images Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 11:53:45 +00:00
FLASH_MB := 8
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(RT63_PACKAGES) $(USB2_PACKAGES)
endef
TARGET_DEVICES += CPA-ZNTE60T
define Device/MAGIC
$(Device/bcm63xx)
IMAGES :=
DEVICE_TITLE := Telsey MAGIC (Alice W-Gate)
DEVICE_DTS := magic
CFE_BOARD_ID := MAGIC
CFE_CHIP_ID := 6348
DEVICE_PACKAGES := \
$(RT63_PACKAGES)
endef
TARGET_DEVICES += MAGIC
### TP-Link ###
define Device/TD-W8900GB
$(Device/bcm63xx)
DEVICE_TITLE := TP-Link TD-W8900GB
DEVICE_DTS := td-w8900gb
CFE_BOARD_ID := 96348GW-11
CFE_CHIP_ID := 6348
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --rsa-signature "$(shell printf 'PRID\x89\x10\x00\x02')"
IMAGE_OFFSET := 0x20000
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += TD-W8900GB
### USRobotics ###
define Device/USR9108
$(Device/bcm63xx)
DEVICE_TITLE := USRobotics 9108
DEVICE_DTS := usr9108
CFE_BOARD_ID := 96348GW-A
CFE_CHIP_ID := 6348
DEVICE_PACKAGES := \
$(B43_PACKAGES) $(USB1_PACKAGES)
endef
TARGET_DEVICES += USR9108
### ZyXEL ###
define Device/P870HW-51a_v2
$(Device/bcm63xx)
IMAGES := factory.bin
IMAGE/factory.bin := cfe-bin | zyxel-bin
DEVICE_TITLE := ZyXEL P870HW-51a v2
DEVICE_DTS := p870hw-51a-v2
CFE_BOARD_ID := 96368VVW
CFE_CHIP_ID := 6368
brcm63xx: simplify block size and image offset options Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-21 12:17:02 +00:00
CFE_EXTRAS += --rsa-signature "ZyXEL" --signature "ZyXEL_0001"
brcm63xx: move profiles definitions to image/Makefile This switches brcm63xx to the new profile definition system in image/Makefile Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-24 19:09:19 +00:00
DEVICE_PACKAGES := \
$(B43_PACKAGES)
endef
TARGET_DEVICES += P870HW-51a_v2
Reference in a new issue Copy permalink