KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/ramips/image/mt7620.mk

712 lines
18 KiB
Makefile
Raw Normal View History

ramips: move different subtarget image generation to separate makefiles to improve maintainability - all subtarget specific defines are in their own files - common defines left in main Makefile - each subtarget makefile idefed with SUBTARGET - all subtargets compile tested - few seems to be broken/unneeded things marked with FIXME Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49104
2016-04-01 07:11:48 +00:00
#
# MT7620A Profiles
#
ramips: add support for D-Link DWR-116-A1/2 The DWR-116-A1/2 Wireless Router is based on the MT7620N SoC. Specification: MediaTek MT7620N (580 Mhz) 32 MB of RAM 8 MB of FLASH 802.11bgn radio 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN) 2x external, non-detachable antennas UART (J1 in A1, JP1 in A2) header on PCB (57600 8n1) 6x LED (GPIO-controlled), 2x button JBOOT bootloader Known issues: WAN LED is drived by uartl tx pin. I decide to use this pin as uartlite tx pin. Installation: Apply factory image via http web-gui. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2018-01-20 08:27:03 +00:00
DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD TPLINK_HVERSION \
DLINK_ROM_ID DLINK_FAMILY_MEMBER DLINK_FIRMWARE_SIZE
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
define Build/elecom-header
cp $@ $(KDIR)/v_0.0.0.bin
ramips: add support for ELECOM WRH-300CR ELECOM WRH-300CR is MT7620N based very small Wi-Fi router with 64MiB DDR2 SDRAM, 16MiB SPI Flash, one fast ethernet port, and (internal but easy-to-access) UART. it also has internal USB hub and USB card reader which provide one USB port, one SD card slot, and one microSD card slot. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> SVN-Revision: 49211
2016-04-21 19:46:59 +00:00
( \
build: use mkhash to replace various quirky md5sum/openssl calls Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-25 15:40:05 +00:00
mkhash md5 $(KDIR)/v_0.0.0.bin && \
ramips: add support for ELECOM WRH-300CR ELECOM WRH-300CR is MT7620N based very small Wi-Fi router with 64MiB DDR2 SDRAM, 16MiB SPI Flash, one fast ethernet port, and (internal but easy-to-access) UART. it also has internal USB hub and USB card reader which provide one USB port, one SD card slot, and one microSD card slot. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> SVN-Revision: 49211
2016-04-21 19:46:59 +00:00
echo 458 \
build: use mkhash to replace various quirky md5sum/openssl calls Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-25 15:40:05 +00:00
) | mkhash md5 > $(KDIR)/v_0.0.0.md5
mt7620: image.mk: make elecom-header reproducible elecom-header adds a timestamp dependency. Replace the timestamps with SOURCE_DATE_EPOCH [0] variable. [0] https://reproducible-builds.org/specs/source-date-epoch/ Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2017-11-03 01:45:45 +00:00
$(STAGING_DIR_HOST)/bin/tar -c \
$(if $(SOURCE_DATE_EPOCH),--mtime=@$(SOURCE_DATE_EPOCH)) \
-f $@ -C $(KDIR) v_0.0.0.bin v_0.0.0.md5
ramips: add support for ELECOM WRH-300CR ELECOM WRH-300CR is MT7620N based very small Wi-Fi router with 64MiB DDR2 SDRAM, 16MiB SPI Flash, one fast ethernet port, and (internal but easy-to-access) UART. it also has internal USB hub and USB card reader which provide one USB port, one SD card slot, and one microSD card slot. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> SVN-Revision: 49211
2016-04-21 19:46:59 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/ai-br100
DTS := AI-BR100
IMAGE_SIZE := 7936k
DEVICE_TITLE := Aigale Ai-BR100
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += ai-br100
ramips: add support for ALFA Network AC1200RM ALFA Network AC1200RM is an AC1200 router, with 5-port FE switch and USB 2.0 port. Device is based on MediaTek MT7620A + MT7612EN. Specification: - MT7620A (580 MHz) - 64 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 5x 10/100 Mbps Ethernet with passive PoE output in WAN and LAN4 - 2T2R 2.4 GHz (MT7620A) - 2T2R 5 GHz (MT7612EN) - 1x USB 2.0 - 9x LED (8 driven by GPIO) - 1x button (reset) - DC jack for main power input (12-24 V) - 2x UART, I2C, I2S and LED headers Flash instruction (do it under U-Boot, using UART and TFTP server): Select option "2: Load system code then write to Flash via TFTP" and use "sysupgrade" image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-10-14 08:44:39 +00:00
define Device/alfa-network_ac1200rm
DTS := AC1200RM
IMAGE_SIZE := 16064k
DEVICE_TITLE := ALFA Network AC1200RM
ramips: add U-Boot env support for ALFA Network AC1200RM Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-02-26 22:00:07 +00:00
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci uboot-envtools
ramips: add support for ALFA Network AC1200RM ALFA Network AC1200RM is an AC1200 router, with 5-port FE switch and USB 2.0 port. Device is based on MediaTek MT7620A + MT7612EN. Specification: - MT7620A (580 MHz) - 64 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 5x 10/100 Mbps Ethernet with passive PoE output in WAN and LAN4 - 2T2R 2.4 GHz (MT7620A) - 2T2R 5 GHz (MT7612EN) - 1x USB 2.0 - 9x LED (8 driven by GPIO) - 1x button (reset) - DC jack for main power input (12-24 V) - 2x UART, I2C, I2S and LED headers Flash instruction (do it under U-Boot, using UART and TFTP server): Select option "2: Load system code then write to Flash via TFTP" and use "sysupgrade" image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-10-14 08:44:39 +00:00
endef
TARGET_DEVICES += alfa-network_ac1200rm
ramips: image: simplify TP-Link Archer devices definitions Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-06-23 21:20:53 +00:00
define Device/Archer
build: add mktplinkfw2 hardcoded values to makefile This patch adds all the board-specific values currently hardcoded in mktplinkfw2.c back to the respective device declarations in the makefiles. The rationale is to avoid modifying the source code every time a new board or board variant is added. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2017-10-03 10:46:09 +00:00
TPLINK_HWREVADD := 0
TPLINK_HVERSION := 3
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
KERNEL := $(KERNEL_DTB)
build: add mktplinkfw2 hardcoded values to makefile This patch adds all the board-specific values currently hardcoded in mktplinkfw2.c back to the respective device declarations in the makefiles. The rationale is to avoid modifying the source code every time a new board or board variant is added. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2017-10-03 10:46:09 +00:00
KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-v2-header -e
IMAGE/factory.bin := tplink-v2-image -e
IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata
ramips: image: simplify TP-Link Archer devices definitions Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-06-23 21:20:53 +00:00
endef
define Device/ArcherC20i
$(Device/Archer)
DTS := ArcherC20i
SUPPORTED_DEVICES := c20i
build: add mktplinkfw2 hardcoded values to makefile This patch adds all the board-specific values currently hardcoded in mktplinkfw2.c back to the respective device declarations in the makefiles. The rationale is to avoid modifying the source code every time a new board or board variant is added. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2017-10-03 10:46:09 +00:00
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0xc2000001
TPLINK_HWREV := 58
ramips: add factory firmware for Tp-Link C20i/C50 TP-Link firmware doesn't accept sysupgrade.bin with metadata. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2017-05-05 15:07:28 +00:00
IMAGES += factory.bin
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
DEVICE_TITLE := TP-Link ArcherC20i
endef
TARGET_DEVICES += ArcherC20i
ramips: move different subtarget image generation to separate makefiles to improve maintainability - all subtarget specific defines are in their own files - common defines left in main Makefile - each subtarget makefile idefed with SUBTARGET - all subtargets compile tested - few seems to be broken/unneeded things marked with FIXME Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 49104
2016-04-01 07:11:48 +00:00
ramips: Archer C50v1: support US and EU versions For the Archer C50v1, the EU and US versions are differentiated by their respective HW additional version (0x0 for US, 0x2 for EU). The stock web interface checks this field before flashing, making it impossible to flash the current (US) factory image on EU hardware. However the bootloader does not check this field, making it possible to use a single sysupgrade image for both hardware. This patch adds the necessary build bits to generate both EU and US factory images, and renames the target as "Archer C50v1" since there are as of now 3 different versions of Archer C50 (all with different CPUs). Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-07-28 11:00:54 +00:00
define Device/ArcherC50v1
ramips: image: simplify TP-Link Archer devices definitions Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-06-23 21:20:53 +00:00
$(Device/Archer)
ramips/image: Add Archer C50 to mt7620 Makefile Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-06-12 21:46:35 +00:00
DTS := ArcherC50
ramips: fix image validation errors The name from the Device define will be used in the metadata. Due to typos/different spelling, this name might not match the one exported in /lib/ramips.sh. Fix all name mismatches which were found by checking if the name used in the metadata exists in /lib/ramips.sh. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-01 06:37:03 +00:00
SUPPORTED_DEVICES := c50
build: add mktplinkfw2 hardcoded values to makefile This patch adds all the board-specific values currently hardcoded in mktplinkfw2.c back to the respective device declarations in the makefiles. The rationale is to avoid modifying the source code every time a new board or board variant is added. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2017-10-03 10:46:09 +00:00
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0xc7500001
TPLINK_HWREV := 69
ramips: Archer C50v1: support US and EU versions For the Archer C50v1, the EU and US versions are differentiated by their respective HW additional version (0x0 for US, 0x2 for EU). The stock web interface checks this field before flashing, making it impossible to flash the current (US) factory image on EU hardware. However the bootloader does not check this field, making it possible to use a single sysupgrade image for both hardware. This patch adds the necessary build bits to generate both EU and US factory images, and renames the target as "Archer C50v1" since there are as of now 3 different versions of Archer C50 (all with different CPUs). Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-07-28 11:00:54 +00:00
IMAGES += factory-us.bin factory-eu.bin
build: add mktplinkfw2 hardcoded values to makefile This patch adds all the board-specific values currently hardcoded in mktplinkfw2.c back to the respective device declarations in the makefiles. The rationale is to avoid modifying the source code every time a new board or board variant is added. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2017-10-03 10:46:09 +00:00
IMAGE/factory-us.bin := tplink-v2-image -e -w 0
IMAGE/factory-eu.bin := tplink-v2-image -e -w 2
ramips: Archer C50v1: support US and EU versions For the Archer C50v1, the EU and US versions are differentiated by their respective HW additional version (0x0 for US, 0x2 for EU). The stock web interface checks this field before flashing, making it impossible to flash the current (US) factory image on EU hardware. However the bootloader does not check this field, making it possible to use a single sysupgrade image for both hardware. This patch adds the necessary build bits to generate both EU and US factory images, and renames the target as "Archer C50v1" since there are as of now 3 different versions of Archer C50 (all with different CPUs). Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-07-28 11:00:54 +00:00
DEVICE_TITLE := TP-Link ArcherC50v1
ramips/image: Add Archer C50 to mt7620 Makefile Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-06-12 21:46:35 +00:00
endef
ramips: Archer C50v1: support US and EU versions For the Archer C50v1, the EU and US versions are differentiated by their respective HW additional version (0x0 for US, 0x2 for EU). The stock web interface checks this field before flashing, making it impossible to flash the current (US) factory image on EU hardware. However the bootloader does not check this field, making it possible to use a single sysupgrade image for both hardware. This patch adds the necessary build bits to generate both EU and US factory images, and renames the target as "Archer C50v1" since there are as of now 3 different versions of Archer C50 (all with different CPUs). Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-07-28 11:00:54 +00:00
TARGET_DEVICES += ArcherC50v1
ramips/image: Add Archer C50 to mt7620 Makefile Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-06-12 21:46:35 +00:00
ramips: Add support to TP-Link Archer MR200 CPU: MT7620N 580MHz Flash: 8MB RAM: 64MB build-in modem 3G/4G four ethernet port 10/100Mbps Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-09-24 19:41:43 +00:00
define Device/ArcherMR200
ramips: image: simplify TP-Link Archer devices definitions Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-06-23 21:20:53 +00:00
$(Device/Archer)
ramips: Add support to TP-Link Archer MR200 CPU: MT7620N 580MHz Flash: 8MB RAM: 64MB build-in modem 3G/4G four ethernet port 10/100Mbps Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-09-24 19:41:43 +00:00
DTS := ArcherMR200
ramips: fix tplink image building fix sysupgrade firmware on MR200 Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-12-23 17:04:16 +00:00
SUPPORTED_DEVICES := mr200
build: add mktplinkfw2 hardcoded values to makefile This patch adds all the board-specific values currently hardcoded in mktplinkfw2.c back to the respective device declarations in the makefiles. The rationale is to avoid modifying the source code every time a new board or board variant is added. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2017-10-03 10:46:09 +00:00
TPLINK_FLASHLAYOUT := 8MLmtk
TPLINK_HWID := 0xd7500001
TPLINK_HWREV := 0x4a
Move enablemodem from ramips to new package adb-enablemodem and make it used also by TL-MR6400 Signed-off-by: Filip Moc <lede@moc6.cz>
2017-05-25 19:55:32 +00:00
DEVICE_PACKAGES := kmod-usb2 kmod-usb-net kmod-usb-net-rndis kmod-usb-serial kmod-usb-serial-option adb-enablemodem
ramips: Add support to TP-Link Archer MR200 CPU: MT7620N 580MHz Flash: 8MB RAM: 64MB build-in modem 3G/4G four ethernet port 10/100Mbps Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-09-24 19:41:43 +00:00
DEVICE_TITLE := TP-Link ArcherMR200
endef
TARGET_DEVICES += ArcherMR200
ramips: add support for YUKAI Engineering Inc. BOCCO BOCCO is a communication robot provided by YUKAI Engineering Inc. SoC: MT7620A MEM: 256MB Flash: 8MB NAND: 512MB (non support) Include Sound DAC and AMP. No Wired Ethernet. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
2018-02-22 16:58:23 +00:00
define Device/bocco
DTS := BOCCO
DEVICE_TITLE := YUKAI Engineering BOCCO
DEVICE_PACKAGES := kmod-sound-core kmod-sound-mt7620 kmod-i2c-ralink
endef
TARGET_DEVICES += bocco
ramips: add support for the HNET C108 The HNET C108 (http://www.szhwtech88.com/Product-product-cid-100-id-4374.html) is a mifi based on MT7602A, which has the following specifications: * CPU: MT7620A * 1x 10/100Mbps Ethernet. * 16 MB Flash. * 64 MB RAM. * 1x USB 2.0 port. Only power is connected, this port is meant for charging other devices. * 1x mini-PCIe slots. * 1x SIM slots. * 1x 2.4Ghz WIFI. * 1x button. * 6000 mAh battery. * 5x controllable LEDs. Works: * Wifi. * Switch. * mini-PCIe slot. Only tested with a USB device (a modem). * SIM slot. * Sysupgrade. * Button (reset). Not working (also applies to the factory firmware): * Wifi LED. It is always switched on, there is no relation to the up/down state or activity of the wireless interface. Not tested: * SD card reader. Notes: * The C108 has no dedicated status LED. I therefore set the LAN LED as status LED. Installation: The router comes pre-installed with OpenWRT, including a variant of Luci. The initial firmware install can be done through this UI, following normal procedure. I.e., access the UI and update the firmware using the sysupgrade-image. Remember to select that you do not want to keep existing settings. Recovery: If you brick the device, the C108 supports recovery using TFTP. Keep the reset button pressed for ~5sec when booting to trigger TFTP. Set the address of the network interface on your machine to 10.10.10.3/24, and rename your image file to Kernal.bin. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
2017-09-06 09:14:16 +00:00
define Device/c108
DTS := C108
IMAGE_SIZE := 16777216
DEVICE_TITLE := HNET C108
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620
endef
TARGET_DEVICES += c108
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/cf-wr800n
DTS := CF-WR800N
DEVICE_TITLE := Comfast CF-WR800N
endef
TARGET_DEVICES += cf-wr800n
define Device/cs-qr10
DTS := CS-QR10
DEVICE_TITLE := Planex CS-QR10
ramips: fix Planex CS-QR10 device packages Add kmod-sound-core, it is a dependency of kmod-sound-mt7620 and will not be autoselected. Remove kmod-i2c-core, it will be autoselected by kmod-i2c-ralink. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-11-18 11:19:00 +00:00
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci \
kmod-sound-core kmod-sound-mt7620 \
kmod-i2c-ralink kmod-sdhci-mt7620
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
endef
TARGET_DEVICES += cs-qr10
define Device/d240
DTS := D240
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Sanlinking Technologies D240
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76-core kmod-mt76x2 kmod-sdhci-mt7620
endef
TARGET_DEVICES += d240
define Device/db-wrt01
DTS := DB-WRT01
DEVICE_TITLE := Planex DB-WRT01
endef
TARGET_DEVICES += db-wrt01
define Device/dch-m225
DTS := DCH-M225
BLOCKSIZE := 4k
IMAGES += factory.bin
IMAGE_SIZE := 6848k
IMAGE/sysupgrade.bin := \
append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs | \
seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := \
append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
append-rootfs | pad-rootfs -x 64 | \
seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
seama-seal -m "signature=wapn22_dlink.2013gui_dap1320b" | \
check-size $$$$(IMAGE_SIZE)
DEVICE_TITLE := D-Link DCH-M225
ramips: fix DCH-M225 support Setting the pins of the UARTF group to GPIO+I2S at the time the I2C driver loads is to late for the wps GPIO button. The gpio-keys driver fails to load since the pin used by the wps button is not yet set to GPIO. The wps button with the rfkill keycode is essential for this wireless only board. Add the missing sound and I2C kernel modules corresponding to the device nodes. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-11-18 10:59:22 +00:00
DEVICE_PACKAGES := kmod-mt76 kmod-sound-core kmod-sound-mt7620 kmod-i2c-ralink
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
endef
TARGET_DEVICES += dch-m225
define Device/dir-810l
DTS := DIR-810L
IMAGE_SIZE := 6720k
DEVICE_TITLE := D-Link DIR-810L
endef
TARGET_DEVICES += dir-810l
ramips: add support for D-Link DWR-116-A1/2 The DWR-116-A1/2 Wireless Router is based on the MT7620N SoC. Specification: MediaTek MT7620N (580 Mhz) 32 MB of RAM 8 MB of FLASH 802.11bgn radio 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN) 2x external, non-detachable antennas UART (J1 in A1, JP1 in A2) header on PCB (57600 8n1) 6x LED (GPIO-controlled), 2x button JBOOT bootloader Known issues: WAN LED is drived by uartl tx pin. I decide to use this pin as uartlite tx pin. Installation: Apply factory image via http web-gui. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2018-01-20 08:27:03 +00:00
define Device/dlink_dwr-116-a1
DTS := DWR-116-A1
DEVICE_TITLE := D-Link DWR-116 A1/A2
DEVICE_PACKAGES := kmod-usb2 jboot-tools
DLINK_ROM_ID := DLK6E3803001
DLINK_FAMILY_MEMBER := 0x6E38
DLINK_FIRMWARE_SIZE := 0x7E0000
KERNEL := $(KERNEL_DTB)
IMAGES += factory.bin
IMAGE/sysupgrade.bin := mkdlinkfw | pad-rootfs | append-metadata
IMAGE/factory.bin := mkdlinkfw | pad-rootfs | mkdlinkfw-factory
endef
TARGET_DEVICES += dlink_dwr-116-a1
ramips: add support for D-Link DWR-118-A2 The DWR-118-A2 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 128 MB of RAM - 16 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7612EN) - 4x 10/100 Mbps Ethernet (1 WAN and 3 LAN) - 1x 10/100/1000 Mbps Marvell Ethernet PHY (1 LAN) - 2x external, non-detachable antennas - 1x USB 2.0 - UART (J1) header on PCB (57600 8n1) - 7x LED (5x GPIO-controlled), 2x button - JBOOT bootloader Known issues: - GELAN not working - flash is very slow The status led has been assigned to the dwr-118-a2:green:internet led. At the end of the boot it is switched off and is available for other operation. Work correctly also during sysupgrade operation. Installation: Apply factory image via http web-gui or JBOOT recovery page How to revert to OEM firmware: - push the reset button and turn on the power. Wait until LED start blinking (~10sec.) - upload original factory image via JBOOT http (IP: 192.168.123.254) Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2018-04-19 17:34:22 +00:00
define Device/dlink_dwr-118-a2
DTS := DWR-118-A2
DEVICE_TITLE := D-Link DWR-118 A2
DEVICE_PACKAGES := kmod-usb2 jboot-tools kmod-mt76
DLINK_ROM_ID := DLK6E3814001
DLINK_FAMILY_MEMBER := 0x6E38
DLINK_FIRMWARE_SIZE := 0xFE0000
KERNEL := $(KERNEL_DTB)
IMAGES += factory.bin
IMAGE/sysupgrade.bin := mkdlinkfw | pad-rootfs | append-metadata
IMAGE/factory.bin := mkdlinkfw | pad-rootfs | mkdlinkfw-factory
endef
TARGET_DEVICES += dlink_dwr-118-a2
ramips: add support for DLINK DWR-921-C1 The DWR-921-C1 Wireless Routers with LTE embedded modem is based on the MT7620N SoC. Specification: * MediaTek MT7620N (580 Mhz) * 64 MB of RAM * 16 MB of FLASH * 802.11bgn radio * 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN) * 2x external, detachable (LTE) antennas * UART header on PCB (57600 8n1) * 6x LED (GPIO-controlled) * 1x bi-color Signal Strength LED (GPIO-controlled) * 2x button * JBOOT bootloader The status led has been assigned to the dwr-921-c1:green:sigstrength (lte signal strength) led. At the end of the boot it is switched off and is available for lte operation. Work correctly also during sysupgrade operation. Installation: Apply factory image via d-link http web-gui. How to revert to OEM firmware: 1.) Push the reset button and turn on the power. Wait until LED start blinking (~10sec.) 2.) Upload original factory image via JBOOT http (IP: 192.168.123.254) 3.) If http doesn't work, it can be done with curl command: curl -F FN=@XXXXX.bin http://192.168.123.254/upg where XXXXX.bin is name of firmware file. Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
2018-03-10 09:34:38 +00:00
define Device/dlink_dwr-921-c1
DTS := DWR-921-C1
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := D-Link DWR-921 C1
DLINK_ROM_ID := DLK6E2414001
DLINK_FAMILY_MEMBER := 0x6E24
DLINK_FIRMWARE_SIZE := 0xFE0000
KERNEL := $(KERNEL_DTB)
IMAGES += factory.bin
IMAGE/sysupgrade.bin := mkdlinkfw | pad-rootfs | append-metadata
IMAGE/factory.bin := mkdlinkfw | pad-rootfs | mkdlinkfw-factory
DEVICE_PACKAGES := jboot-tools \
kmod-usb2 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
endef
TARGET_DEVICES += dlink_dwr-921-c1
ramips: add support for DLINK DWR-921-C3 The DWR-921-C3 Wireless Routers with LTE embedded modem is based on the MT7620N SoC. Specification: * MediaTek MT7620N (580 Mhz) * 64 MB of RAM * 16 MB of FLASH * 802.11bgn radio * 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN) * 2x external, detachable (LTE) antennas * UART header on PCB (57600 8n1) * 6x LED (GPIO-controlled) * 1x bi-color Signal Strength LED (GPIO-controlled) * 2x button * JBOOT bootloader Installation: Apply factory image via d-link http web-gui. How to revert to OEM firmware: 1.) Push the reset button and turn on the power. Wait until LED start blinking (~10sec.) 2.) Upload original factory image via JBOOT http (IP: 192.168.123.254) 3.) If http doesn't work, it can be done with curl command: curl -F FN=@XXXXX.bin http://192.168.123.254/upg where XXXXX.bin is name of firmware file. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2018-03-22 20:47:17 +00:00
define Device/dlink_dwr-921-c3
$(Device/dlink_dwr-921-c1)
DEVICE_TITLE := D-Link DWR-921 C3
DLINK_ROM_ID := DLK6E2414009
SUPPORTED_DEVICES := dlink,dwr-921-c1
endef
TARGET_DEVICES += dlink_dwr-921-c3
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/e1700
DTS := E1700
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
umedia-header 0x013326
DEVICE_TITLE := Linksys E1700
endef
TARGET_DEVICES += e1700
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
define Device/ex2700
ramips: cleanup mt7620 Netgear image code 1. Reuse functions defined in `image-commands.mk` 2. Rename fakeroot image Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2017-01-23 13:41:15 +00:00
NETGEAR_HW_ID := 29764623+4+0+32+2x2+0
NETGEAR_BOARD_ID := EX2700
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
DTS := EX2700
ramips: set blocksize for 4MB devices Set the blocksize for devices having only 4MB of flash for ramips devices already using the new image build code. Informations about the used flash chip are gathered from the OpenWrt wiki, wikidevi, forums, OEM bootlogs or the compatible property in the device tree source file. The en25q32b from the AirLive Air3GII does not have 4k support in the kernel. For the following boards no information about the used flash chip could be found and a 64k blocksize is assumed: - Ralink V11ST-FE - Ralink AP-RT3052-V22RW-2X2 - MediaTek MT7628 EVB - MediaTek MT7621 EVB - UPVEL UR-326N4G - Buffalo WZR-AGL300NH Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-03 07:56:35 +00:00
BLOCKSIZE := 4k
image: specify max image size in Kilobyte/Megabyte Use the k and m unit suffix to be consistent with the blocksize. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-04 07:58:02 +00:00
IMAGE_SIZE := $(ralink_default_fw_size_4M)
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
IMAGES += factory.bin
build: consolidate fake uImage header build commands Merge the two existing functions and use a parameter for the type header field. It updates the syntax of the former mpc85xx fake ramdisk header command to be compatible with mkimage from u-boot 2018.03 and fixes the build error spotted by the build bot. Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-04-20 04:30:46 +00:00
KERNEL := $(KERNEL_DTB) | uImage lzma | pad-offset 64k 64 | append-uImage-fakehdr filesystem
ramips: add size checks/append metadata where missing Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-26 09:43:34 +00:00
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
ramips: cleanup mt7620 Netgear image code 1. Reuse functions defined in `image-commands.mk` 2. Rename fakeroot image Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2017-01-23 13:41:15 +00:00
netgear-dni
ramips: remove kmod-mt76* from EX2700 images These modules are not needed by the EX2700, since it does not have an external wifi chip (MT7620A is covered by rt2x00). Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2017-03-01 17:44:03 +00:00
DEVICE_PACKAGES := -kmod-mt76
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
DEVICE_TITLE := Netgear EX2700
endef
TARGET_DEVICES += ex2700
ramips: Add support for Netgear EX3800 The Netgear EX3800 is essentially an EX3700 with a mains output socket. Both devices use the exact same firmware image (original firmware is named EX3700-EX3800-version.chk). This patch adds suport by renaming the EX3700 device to EX3700/EX3800 and updating the necessary glue. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-07-30 10:17:44 +00:00
define Device/ex3700-ex3800
ramips: add support for Netgear EX3700 Specifications: * SoC: MT7620A * RAM: 64 MB DDR * Flash: 8MB NOR SPI flash * WiFi: MT7612E (5Ghz) and builtin MT7620A (2.4GHz) * LAN: 1x100M The -factory images can be flashed from the device's web interface or via nmrpflash. Co-authored-by: Paul Oranje <por@xs4all.nl> Signed-off-by: Paul Oranje <por@xs4all.nl> Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2017-03-03 14:36:51 +00:00
NETGEAR_BOARD_ID := U12H319T00_NETGEAR
DTS := EX3700
BLOCKSIZE := 4k
IMAGE_SIZE := 7744k
ramips: EX3700: rename factory.bin to factory.chk The stock firmware upgrade interface requires the file to end with a .chk extension. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-07-30 10:02:55 +00:00
IMAGES += factory.chk
IMAGE/factory.chk := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | netgear-chk
ramips: add support for Netgear EX3700 Specifications: * SoC: MT7620A * RAM: 64 MB DDR * Flash: 8MB NOR SPI flash * WiFi: MT7612E (5Ghz) and builtin MT7620A (2.4GHz) * LAN: 1x100M The -factory images can be flashed from the device's web interface or via nmrpflash. Co-authored-by: Paul Oranje <por@xs4all.nl> Signed-off-by: Paul Oranje <por@xs4all.nl> Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2017-03-03 14:36:51 +00:00
DEVICE_PACKAGES := -kmod-mt76 kmod-mt76x2
ramips: Add support for Netgear EX3800 The Netgear EX3800 is essentially an EX3700 with a mains output socket. Both devices use the exact same firmware image (original firmware is named EX3700-EX3800-version.chk). This patch adds suport by renaming the EX3700 device to EX3700/EX3800 and updating the necessary glue. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-07-30 10:17:44 +00:00
DEVICE_TITLE := Netgear EX3700/EX3800
SUPPORTED_DEVICES := ex3700
ramips: add support for Netgear EX3700 Specifications: * SoC: MT7620A * RAM: 64 MB DDR * Flash: 8MB NOR SPI flash * WiFi: MT7612E (5Ghz) and builtin MT7620A (2.4GHz) * LAN: 1x100M The -factory images can be flashed from the device's web interface or via nmrpflash. Co-authored-by: Paul Oranje <por@xs4all.nl> Signed-off-by: Paul Oranje <por@xs4all.nl> Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2017-03-03 14:36:51 +00:00
endef
ramips: Add support for Netgear EX3800 The Netgear EX3800 is essentially an EX3700 with a mains output socket. Both devices use the exact same firmware image (original firmware is named EX3700-EX3800-version.chk). This patch adds suport by renaming the EX3700 device to EX3700/EX3800 and updating the necessary glue. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-07-30 10:17:44 +00:00
TARGET_DEVICES += ex3700-ex3800
ramips: add support for Netgear EX3700 Specifications: * SoC: MT7620A * RAM: 64 MB DDR * Flash: 8MB NOR SPI flash * WiFi: MT7612E (5Ghz) and builtin MT7620A (2.4GHz) * LAN: 1x100M The -factory images can be flashed from the device's web interface or via nmrpflash. Co-authored-by: Paul Oranje <por@xs4all.nl> Signed-off-by: Paul Oranje <por@xs4all.nl> Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2017-03-03 14:36:51 +00:00
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/gl-mt300a
DTS := GL-MT300A
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := GL-Inet GL-MT300A
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += gl-mt300a
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
ramips: add support for Kimax U25AWF-H1 Kimax U-25AWF-H1 is is a 2,5" HDD Enclosure with Wi-Fi/Eth conection and battery, based on MediaTek MT7620A. Patch rewritten from: https://forum.openwrt.org/viewtopic.php?pid=305643 Specification: - MT7620A CPU - 64 MB of RAM - 16 MB of FLASH - 802.11bgn WiFi - 1x 10/100 Mbps Ethernet - USB 2.0 Host - UART for serial console Flash instruction: 1. Download lede-ramips-mt7620-u25awf-h1-squashfs-sysupgrade.bin 2. Open webinterface a upgrade 3. After boot connect via ethernet to ip 192.168.1.1 Signed-off-by: Daniel Kucera <daniel.kucera@gmail.com> [fix reset button gpio, don't add a lan/wan vlan config for single port board, add -H1 suffix do make sure that this revision of the board is supported/tested] Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-19 08:46:44 +00:00
define Device/u25awf-h1
DTS := U25AWF-H1
IMAGE_SIZE := 16064k
DEVICE_TITLE := Kimax U25AWF-H1
endef
TARGET_DEVICES += u25awf-h1
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/gl-mt300n
DTS := GL-MT300N
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
IMAGE_SIZE := $(ralink_default_fw_size_16M)
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
DEVICE_TITLE := GL-Inet GL-MT300N
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += gl-mt300n
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/gl-mt750
DTS := GL-MT750
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := GL-Inet GL-MT750
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += gl-mt750
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/hc5661
DTS := HC5661
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := HiWiFi HC5661
DEVICE_PACKAGES := kmod-usb2 kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += hc5661
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/hc5761
DTS := HC5761
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := HiWiFi HC5761
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += hc5761
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/hc5861
DTS := HC5861
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := HiWiFi HC5861
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += hc5861
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
ramips: add support for Blueendless Kimax U35WF Blueendless Kimax U35WF is a 3,5" HDD Enclosure with Wi-Fi and Ethernet Patch rewritten from: https://forum.openwrt.org/viewtopic.php?id=66908 Based on: https://github.com/lede-project/source/pull/965 Specification: - SoC: MediaTek MT7620N - CPU/Speed: 580 MHz - Flash-Chip: KH25L12835F Spi Flash - Flash size: 16 MiB - RAM: 64 MiB - LAN: 1x 100 Mbps Ethernet - WiFi SoC-integrated: 802.11bgn - 1x USB 2.0 - UART: for serial console Installation: 1. Download sysupgrade.bin 2. Open vendor web interface 3. Choose to upgrade firmware 3. After reboot connect via ethernet at 192.168.1.1 Signed-off-by: Ademar Arvati Filho <arvati@hotmail.com>
2018-07-04 01:29:36 +00:00
define Device/kimax_u35wf
DTS := U35WF
IMAGE_SIZE := 16064k
DEVICE_TITLE := Kimax U35WF
endef
TARGET_DEVICES += kimax_u35wf
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/kng_rc
DTS := kng_rc
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := ZyXEL Keenetic Viva
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-switch-rtl8366-smi kmod-switch-rtl8367b
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to 64k | check-size $$$$(IMAGE_SIZE) | \
zyimage -d 8997 -v "ZyXEL Keenetic Viva"
ramips: sync image filename with boardname Use <manufacturer>_<modelname> as image name for board using the devicetree compat string as boardname. Replace the underline of the device define, to keep the SUPPORTED_DEVICES in sync with a devicetree compat string based boardname. Override the default SUPPORTED_DEVICES for board which are having an userspace boardname with an underline. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-16 23:30:21 +00:00
SUPPORTED_DEVICES := kng_rc
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += kng_rc
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/kn_rc
DTS := kn_rc
DEVICE_TITLE := ZyXEL Keenetic Omni
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
IMAGES += factory.bin
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pad-to 64k | check-size $$$$(IMAGE_SIZE) | \
zyimage -d 4882 -v "ZyXEL Keenetic Omni"
ramips: sync image filename with boardname Use <manufacturer>_<modelname> as image name for board using the devicetree compat string as boardname. Replace the underline of the device define, to keep the SUPPORTED_DEVICES in sync with a devicetree compat string based boardname. Override the default SUPPORTED_DEVICES for board which are having an userspace boardname with an underline. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-16 23:30:21 +00:00
SUPPORTED_DEVICES := kn_rc
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += kn_rc
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/kn_rf
DTS := kn_rf
DEVICE_TITLE := ZyXEL Keenetic Omni II
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
IMAGES += factory.bin
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pad-to 64k | check-size $$$$(IMAGE_SIZE) | \
zyimage -d 2102034 -v "ZyXEL Keenetic Omni II"
ramips: sync image filename with boardname Use <manufacturer>_<modelname> as image name for board using the devicetree compat string as boardname. Replace the underline of the device define, to keep the SUPPORTED_DEVICES in sync with a devicetree compat string based boardname. Override the default SUPPORTED_DEVICES for board which are having an userspace boardname with an underline. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-16 23:30:21 +00:00
SUPPORTED_DEVICES := kn_rf
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += kn_rf
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
define Device/microwrt
DTS := MicroWRT
image: specify max image size in Kilobyte/Megabyte Use the k and m unit suffix to be consistent with the blocksize. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-04 07:58:02 +00:00
IMAGE_SIZE := 16128k
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
DEVICE_TITLE := Microduino MicroWRT
endef
TARGET_DEVICES += microwrt
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/miwifi-mini
DTS := MIWIFI-MINI
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Xiaomi MiWiFi Mini
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += miwifi-mini
define Device/mlw221
DTS := MLW221
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Kingston MLW221
endef
TARGET_DEVICES += mlw221
define Device/mlwg2
DTS := MLWG2
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Kingston MLWG2
endef
TARGET_DEVICES += mlwg2
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
define Device/mt7620a
DTS := MT7620a
DEVICE_TITLE := MediaTek MT7620a EVB
endef
TARGET_DEVICES += mt7620a
define Device/mt7620a_mt7530
DTS := MT7620a_MT7530
DEVICE_TITLE := MediaTek MT7620a + MT7530 EVB
ramips: sync image filename with boardname Use <manufacturer>_<modelname> as image name for board using the devicetree compat string as boardname. Replace the underline of the device define, to keep the SUPPORTED_DEVICES in sync with a devicetree compat string based boardname. Override the default SUPPORTED_DEVICES for board which are having an userspace boardname with an underline. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-16 23:30:21 +00:00
SUPPORTED_DEVICES := mt7620a_mt7530
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
TARGET_DEVICES += mt7620a_mt7530
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/mt7620a_mt7610e
DTS := MT7620a_MT7610e
DEVICE_TITLE := MediaTek MT7620a + MT7610e EVB
ramips: sync image filename with boardname Use <manufacturer>_<modelname> as image name for board using the devicetree compat string as boardname. Replace the underline of the device define, to keep the SUPPORTED_DEVICES in sync with a devicetree compat string based boardname. Override the default SUPPORTED_DEVICES for board which are having an userspace boardname with an underline. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-16 23:30:21 +00:00
SUPPORTED_DEVICES := mt7620a_mt7610e
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
endef
TARGET_DEVICES += mt7620a_mt7610e
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
define Device/mt7620a_v22sg
DTS := MT7620a_V22SG
DEVICE_TITLE := MediaTek MT7620a V22SG
ramips: sync image filename with boardname Use <manufacturer>_<modelname> as image name for board using the devicetree compat string as boardname. Replace the underline of the device define, to keep the SUPPORTED_DEVICES in sync with a devicetree compat string based boardname. Override the default SUPPORTED_DEVICES for board which are having an userspace boardname with an underline. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-16 23:30:21 +00:00
SUPPORTED_DEVICES := mt7620a_v22sg
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
TARGET_DEVICES += mt7620a_v22sg
define Device/mzk-750dhp
DTS := MZK-750DHP
DEVICE_TITLE := Planex MZK-750DHP
DEVICE_PACKAGES := kmod-mt76
endef
TARGET_DEVICES += mzk-750dhp
define Device/mzk-ex300np
DTS := MZK-EX300NP
DEVICE_TITLE := Planex MZK-EX300NP
endef
TARGET_DEVICES += mzk-ex300np
define Device/mzk-ex750np
DTS := MZK-EX750NP
DEVICE_TITLE := Planex MZK-EX750NP
DEVICE_PACKAGES := kmod-mt76
endef
TARGET_DEVICES += mzk-ex750np
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/na930
DTS := NA930
IMAGE_SIZE := 20m
DEVICE_TITLE := Sercomm NA930
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += na930
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
define Device/oy-0001
DTS := OY-0001
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Oh Yeah OY-0001
endef
TARGET_DEVICES += oy-0001
define Device/psg1208
DTS := PSG1208
DEVICE_TITLE := Phicomm PSG1208
DEVICE_PACKAGES := kmod-mt76
endef
TARGET_DEVICES += psg1208
ramips: rename PSG1218 to match label Fix previous commit to be less ambigous: PSG1218 rev.A = 5 ports, external PA, heatsinks PSG1218 rev.B = 4 ports, internal PA, no heatsinks Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-04-21 00:47:44 +00:00
define Device/psg1218a
DTS := PSG1218A
DEVICE_TITLE := Phicomm PSG1218 rev.Ax
ramips: split Phicomm PSG1218 and PSG1218K2C PSG1218 got only 4 Ethernet ports and WAN on port 3 while PSG1218K2C got 5 Ethernet ports and WAN on port 4 Switch to use kmod-kt76x2 instead of kmod-mt76 for both devices while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-04-20 22:53:03 +00:00
DEVICE_PACKAGES := kmod-mt76x2
ramips: add former board names to PSG1218 variants Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-04-21 12:51:58 +00:00
SUPPORTED_DEVICES += psg1218
ramips: Add support for Phicomm K2 PSG1218 - CPU: MT7620A 580MHz - Flash: 8MB - RAM: 64MB - External PA+LNA on both WLAN2.4 and WLAN5 - 4x LAN ethernet and 1x WAN ethernet Signed-off-by: Xuefu Lin <xuefulin@gmail.com>
2016-09-30 11:41:12 +00:00
endef
ramips: rename PSG1218 to match label Fix previous commit to be less ambigous: PSG1218 rev.A = 5 ports, external PA, heatsinks PSG1218 rev.B = 4 ports, internal PA, no heatsinks Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-04-21 00:47:44 +00:00
TARGET_DEVICES += psg1218a
ramips: Add support for Phicomm K2 PSG1218 - CPU: MT7620A 580MHz - Flash: 8MB - RAM: 64MB - External PA+LNA on both WLAN2.4 and WLAN5 - 4x LAN ethernet and 1x WAN ethernet Signed-off-by: Xuefu Lin <xuefulin@gmail.com>
2016-09-30 11:41:12 +00:00
ramips: rename PSG1218 to match label Fix previous commit to be less ambigous: PSG1218 rev.A = 5 ports, external PA, heatsinks PSG1218 rev.B = 4 ports, internal PA, no heatsinks Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-04-21 00:47:44 +00:00
define Device/psg1218b
DTS := PSG1218B
DEVICE_TITLE := Phicomm PSG1218 rev.Bx
ramips: split Phicomm PSG1218 and PSG1218K2C PSG1218 got only 4 Ethernet ports and WAN on port 3 while PSG1218K2C got 5 Ethernet ports and WAN on port 4 Switch to use kmod-kt76x2 instead of kmod-mt76 for both devices while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-04-20 22:53:03 +00:00
DEVICE_PACKAGES := kmod-mt76x2
ramips: add former board names to PSG1218 variants Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-04-21 12:51:58 +00:00
SUPPORTED_DEVICES += psg1218
ramips: split Phicomm PSG1218 and PSG1218K2C PSG1218 got only 4 Ethernet ports and WAN on port 3 while PSG1218K2C got 5 Ethernet ports and WAN on port 4 Switch to use kmod-kt76x2 instead of kmod-mt76 for both devices while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-04-20 22:53:03 +00:00
endef
ramips: rename PSG1218 to match label Fix previous commit to be less ambigous: PSG1218 rev.A = 5 ports, external PA, heatsinks PSG1218 rev.B = 4 ports, internal PA, no heatsinks Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-04-21 00:47:44 +00:00
TARGET_DEVICES += psg1218b
ramips: split Phicomm PSG1218 and PSG1218K2C PSG1218 got only 4 Ethernet ports and WAN on port 3 while PSG1218K2C got 5 Ethernet ports and WAN on port 4 Switch to use kmod-kt76x2 instead of kmod-mt76 for both devices while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-04-20 22:53:03 +00:00
ramips: Add support for Phicomm K2G Specification: - SoC: MediaTek MT7620A - Flash: 8 MB - RAM: 64 MB - Ethernet: 4 FE ports and 1 GE port (RTL8211F on port 5) - Wireless radio: MT7620 for 2.4G and MT7612E for 5G, both equipped with external PA. - UART: 1 x UART on PCB - 57600 8N1 Flash instruction: The U-boot is based on Ralink SDK so we can flash the firmware using UART: 1. Configure PC with a static IP address and setup an TFTP server. 2. Put the firmware into the tftp directory. 3. Connect the UART line as described on the PCB. 4. Power up the device and press 2, follow the instruction to set device and tftp server IP address and input the firmware file name. U-boot will then load the firmware and write it into the flash. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-06-20 16:56:38 +00:00
define Device/phicomm_k2g
DTS := K2G
IMAGE_SIZE := 7552k
DEVICE_TITLE := Phicomm K2G
DEVICE_PACKAGES := kmod-mt76x2
endef
TARGET_DEVICES += phicomm_k2g
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/rp-n53
DTS := RP-N53
DEVICE_TITLE := Asus RP-N53
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += rp-n53
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
ramips: add support for Asus RT-N11P / RT-N12+ / RT-N12E b1 This is a variant of the MT7620N-based Asus routers. Specifications: - MT7620N (580 MHz) - 32 MB RAM - 8 MB Flash - 5x 10/100Mbps Ethernet (built-in switch) - 2.4 GHz WLAN - 2x external, non-detachable antennas - UART (J2) header on PCB (115200 8n1) Flash instructions: 1. Configure PC with static IP 192.168.1.75/24 2. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds. All 4 LEDs will start to blink, which is when the router will accept firmware files via TFTP. No known limitations on firmware filenames, just send it with a TFTP client to 192.168.1.1. 3. Router will download file from server, write it to flash and reboot. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2017-12-06 14:43:55 +00:00
define Device/rt-n12p
DTS := RT-N12-PLUS
DEVICE_TITLE := Asus RT-N11P/RT-N12+/RT-N12Eb1
endef
TARGET_DEVICES += rt-n12p
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/rt-n14u
DTS := RT-N14U
DEVICE_TITLE := Asus RT-N14u
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += rt-n14u
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
ramips: add support for Asus RT-AC51U Specification: - SoC: MediaTek MT7620A (580 MHz) - RAM: 64 MiB (Winbond W9751G6JB-25) - Flash: 16 MiB (Spansion S25FL128SAIF00) - LAN: x4 100M - WAN: x1 100M - Others: USB 2.0, reset button, wps button and 9 LEDs Issues: - 5 GHz band is not functional (missing driver support) Installation: Asus windows recovery tool: - install the Asus firmware restoration utility - unplug the router, hold the reset button while powering it on - release when the power LED flashes slowly - specify a static IP on your computer: IP address: 192.168.1.75; Subnet mask 255.255.255.0 - Start the Asus firmware restoration utility, specify the sysupgrade image, and press upload TFTP Recovery method: - set computer to a static ip, 192.168.1.75 - connect computer to the LAN 1 port of the router - hold the reset button while powering on the router for a few seconds - send firmware image using a tftp client; i.e from linux: $ tftp tftp> binary tftp> connect 192.168.1.1 tftp> put lede-ramips-mt7620-rt-ac51u-squashfs-sysupgrade.bin tftp> quit Signed-off-by: Ørjan Malde <foxyred333@gmail.com>
2017-05-05 15:54:26 +00:00
define Device/rt-ac51u
DTS := RT-AC51U
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := Asus RT-AC51U
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ehci kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += rt-ac51u
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/tiny-ac
DTS := TINY-AC
DEVICE_TITLE := Dovado Tiny AC
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += tiny-ac
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
ramips: fix BR-6478ACv2 support The wholesale changes introduced in commit f9b8328 missed this DTS file because it hadn't been merged yet. This patch brings it in line to match the other mt7620a devices' DTS files. Additionally, the Internet LED is now labeled correctly and set to unused by default, since the WAN interface is not known in every configuration. Using sysupgrade between images before and after this commit will require the -F flag. Tested-by: Rohan Murch <rohan.murch@gmail.com> Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> [drop internet led default setting] Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-06 17:52:28 +00:00
define Device/edimax_br-6478ac-v2
ramips: add support for Edimax BR-6478AC v2 Roll-up of patches by Rohan Murch, Hans Ulli Kroll, and James McKenzie. Taken from https://forum.openwrt.org/viewtopic.php?id=67192 and updated. Specification: - System-On-Chip: MT7620A - CPU/Speed: 580 MHz - Flash-Chip: Macronix MX25L6405D - Flash size: 8192 KiB - RAM: 64 MiB - Wireless No1: SoC-integrated: MT7620A 2.4GHz 802.11bgn - Wireless No2: On-board chip: MT7612E 5GHz 802.11ac - Switch: Mediatek MT7530W Gigabit Switch - USB: Yes 1 x 2.0 Installation: 1. Download sysupgrade.bin 2. Open vendor web interface 3. Choose to upgrade firmware 4. After reboot connect via ethernet at 192.168.1.1 Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2018-07-16 14:19:19 +00:00
DTS := BR-6478AC-V2
DEVICE_TITLE := Edimax BR-6478AC V2
BLOCKSIZE := 64k
IMAGE_SIZE := 7616k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
edimax-header -s CSYS -m RN68 -f 0x70000 -S 0x01100000 | pad-rootfs | \
append-metadata | check-size $$$$(IMAGE_SIZE)
ramips: fix BR-6478ACv2 support The wholesale changes introduced in commit f9b8328 missed this DTS file because it hadn't been merged yet. This patch brings it in line to match the other mt7620a devices' DTS files. Additionally, the Internet LED is now labeled correctly and set to unused by default, since the WAN interface is not known in every configuration. Using sysupgrade between images before and after this commit will require the -F flag. Tested-by: Rohan Murch <rohan.murch@gmail.com> Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> [drop internet led default setting] Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-06 17:52:28 +00:00
DEVICE_PACKAGES := kmod-mt76 kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
ramips: add support for Edimax BR-6478AC v2 Roll-up of patches by Rohan Murch, Hans Ulli Kroll, and James McKenzie. Taken from https://forum.openwrt.org/viewtopic.php?id=67192 and updated. Specification: - System-On-Chip: MT7620A - CPU/Speed: 580 MHz - Flash-Chip: Macronix MX25L6405D - Flash size: 8192 KiB - RAM: 64 MiB - Wireless No1: SoC-integrated: MT7620A 2.4GHz 802.11bgn - Wireless No2: On-board chip: MT7612E 5GHz 802.11ac - Switch: Mediatek MT7530W Gigabit Switch - USB: Yes 1 x 2.0 Installation: 1. Download sysupgrade.bin 2. Open vendor web interface 3. Choose to upgrade firmware 4. After reboot connect via ethernet at 192.168.1.1 Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2018-07-16 14:19:19 +00:00
endef
ramips: fix BR-6478ACv2 support The wholesale changes introduced in commit f9b8328 missed this DTS file because it hadn't been merged yet. This patch brings it in line to match the other mt7620a devices' DTS files. Additionally, the Internet LED is now labeled correctly and set to unused by default, since the WAN interface is not known in every configuration. Using sysupgrade between images before and after this commit will require the -F flag. Tested-by: Rohan Murch <rohan.murch@gmail.com> Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> [drop internet led default setting] Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-06 17:52:28 +00:00
TARGET_DEVICES += edimax_br-6478ac-v2
ramips: add support for Edimax BR-6478AC v2 Roll-up of patches by Rohan Murch, Hans Ulli Kroll, and James McKenzie. Taken from https://forum.openwrt.org/viewtopic.php?id=67192 and updated. Specification: - System-On-Chip: MT7620A - CPU/Speed: 580 MHz - Flash-Chip: Macronix MX25L6405D - Flash size: 8192 KiB - RAM: 64 MiB - Wireless No1: SoC-integrated: MT7620A 2.4GHz 802.11bgn - Wireless No2: On-board chip: MT7612E 5GHz 802.11ac - Switch: Mediatek MT7530W Gigabit Switch - USB: Yes 1 x 2.0 Installation: 1. Download sysupgrade.bin 2. Open vendor web interface 3. Choose to upgrade firmware 4. After reboot connect via ethernet at 192.168.1.1 Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2018-07-16 14:19:19 +00:00
ramips: add support for TP-Link Archer C2 Specification: - System-On-Chip: MT7620A - CPU/Speed: 580 MHz - Flash-Chip: Winbond 25Q64BVSIG - Flash size: 8192 KiB - RAM: 64 MiB - Wireless No1: SoC-integrated: MT7620A 2.4GHz 802.11bgn - Wireless No2: On-board chip: MT7610EN 5GHz 802.11ac - Switch: RTL8367RB Gigabit Switch - USB: Yes 1 x 2.0 Preparing a TFTP recovery image for initial flashing: Currently the only method to install openwrt for the first time is via TFTP download in u-boot. After first install you can use regular updates. WARNING: This method also overwrites the bootloader partition! Create a TFTP recovery image: 1) Download a stock TP-Link Firmware file here: https://www.tp-link.com/en/download/Archer-C2_V1.html#Firmware 2) Extract u-boot from the binary file: #> dd if=c2v1_stock_firmware.bin of=c2v1_uboot.bin bs=1 skip=512 count=131072 3) Now merge the sysupgrade image and the u-boot into one binary: #> cat c2v1_uboot.bin openwrt-squashfs-sysupgrade.bin > ArcherC2V1_tp_recovery.bin The resulting image can be flashed via TFTP recovery mode. Flash instructions: 1) To flash the recovery image, start a TFTP server from IP address 192.168.0.66 and serve the recovery image named ArcherC2V1_tp_recovery.bin. 2) Connect your device to the LAN port, then press the WPS/Reset button and power it up. Keep pressing the WPS/Reset button for 10 seconds. It will try to download the recovery image and flash it. It can take up to 20-25 minutes to finish. When it reaches 100%, the router will reboot itself. Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Franz Flasch <franz.flasch@gmx.at>
2018-05-17 09:57:00 +00:00
define Device/tplink_c2-v1
$(Device/Archer)
DTS := ArcherC2-v1
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0xc7500001
TPLINK_HWREV := 50
IMAGES += factory.bin
DEVICE_TITLE := TP-Link Archer C2 v1
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-switch-rtl8366-smi kmod-switch-rtl8367b
endef
TARGET_DEVICES += tplink_c2-v1
ramips: rename TP-Link Archer C20 to TP-Link Archer C20 v1 This changes device name from "TP-Link Archer C20" to "TP-Link Archer C20 v1" because of TPLINK released new TP-Link Archer C20 v4. Additionally migration to the generic board detection has been made. Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
2018-01-13 07:16:20 +00:00
define Device/tplink_c20-v1
$(Device/Archer)
DTS := ArcherC20v1
SUPPORTED_DEVICES := c20v1
TPLINK_FLASHLAYOUT := 8Mmtk
TPLINK_HWID := 0xc2000001
TPLINK_HWREV := 0x44
TPLINK_HWREVADD := 0x1
IMAGES += factory.bin
DEVICE_TITLE := TP-Link ArcherC20 v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += tplink_c20-v1
ramips: add support for Vonets VAR11N-300 The VAR11N-300 is a tiny wireless-N device with a hardwired Ethernet cable, one extra Ethernet port, and an internal antenna, based on the MediaTek MT7620n chipset. Specs: - MT7620n WiSoC @ 600MHz - 32 MB SDRAM - 4 MB SPI flash - 2T2R 2.4GHz WiFi-N - 1 attached 10/100 Ethernet cable (LAN) - 1 10/100 Ethernet port (WAN) - 1 attached USB / barrel 5vdc power cable - 5 LEDs (see notes below) - 1 reset button - 1 UART (3 pads on board) Installation: The stock firmware does not support uploading new firmware directly, only checking the manufacturer's site for updates. This process may be possible to spoof, but the update check uses some kind of homebrew encryption that I didn't investigate. Instead, you can install via a backdoor: 1. Set up a TFTP server to serve the firmware binary (lede-ramips-mt7620-var11n-300-squashfs-sysupgrade.bin) 2. Factory reset the device by holding the reset button for a few seconds. 3. Open the web interface (default IP: 192.168.253.254) 4. Log in with the "super admin" credentials: username `vonets`, password `vonets26642519`. 5. On the "Operative Status" page, click the text "System Uptime", then quickly click the uptime value. 6. If successful, an alert dialog will appear reading "Ated start", and the device will now accept telnet connections. If the alert does not appear, repeat step 5 until it works (the timing is a bit tricky). 7. Telnet to the device using credentials "admin / admin" 8. Retrieve the firmware binary from the tftp server: `tftp -l lede.bin -r lede-ramips-mt7620-var11n-300-squashfs-sysupgrade.bin -g <tftp-server-ip>` 9. Write the firmware to flash: `mtd_write write lede.bin /dev/mtd4` 10. Reboot Tested: - LAN / WAN ethernet - WiFi - LAN / WAN / status LED GPIOs (see notes below) - Reset button - Sysupgrade Notes: LEDs: The board has 5 LEDs - two green LEDs for LAN / WAN activity, one blue LED for WiFi, and a pair of "status" LEDs connected to the same GPIO (the blue LED lights when the GPIO is low, and the green when it's high). I was unable to determine how to operate the WiFi LED, as it does not appear to be controlled by a GPIO directly. Recovery: The default U-boot installation will only boot from flash due to a missing environment block. I generated a valid 4KB env block using U-boot's `fw_setenv` tool and wrote it to flash at 0x30000 using an external programmer. After this, it was possible to enter the U-boot commandline interface and download a new image via TFTP (`tftpboot 81b00000 <image-filename>`), but while I could boot this image sucessfully (`bootm`), writing it to flash (`cp.linux`) just corrupted the flash chip. The sysupgrade file can be written to flash at 0x50000 using an external programmer. Signed-off-by: Andrew Crawley <acrawley@gmail.com>
2017-11-23 23:52:13 +00:00
define Device/vonets_var11n-300
DTS := VAR11N-300
IMAGE_SIZE := $(ralink_default_fw_size_4M)
BLOCKSIZE := 4k
DEVICE_TITLE := Vonets VAR11N-300
endef
TARGET_DEVICES += vonets_var11n-300
ramips: add support for Ravpower WD03 The RavPower WD03 is a battery powered SD card reader and a USB port. Specifications: SOC: MediaTek MT7620N BATTERY: 6000mah WLAN: 802.11bgn LAN: 1x 10/100 Mbps Ethernet USB: 1x USB 2.0 (Type-A) RAM: PM Tech PMD708416CTR-5CN 32 MB FLASH: Holtek HT66F40 - 8 MB Flash LED: Power button and 4 leds to indicate power level of the battery (could not get control of that) INPUT: Power, reset button OTHER: USB SD-Card reader with card detect on GPIO#42 Tested and working: - Ethernet - 2.4 GHz WiFi (Correct MAC-address) - installation from tftp - OpenWRT sysupgrade (Preserving and non-preserving) - LEDs - Buttons Installation: - Download the sysupgrade image - Place it in the root of a clean TFTP server running on your computer. - Rename the image to "kernel" — be sure there is no file extension. - Plug the WD03 into your computer via ethernet. - Set your computer to use 10.10.10.254 as its IP address. - With your WD03 shut down, hold down the power button until the first white LED lights up. - Push and hold the reset button and release the power button. Continue holding the reset button for 30 seconds or until it begins searching for files on your TFTP server, whichever comes first. - The WD03 (10.10.10.128) will look for your computer at 10.10.10.254 and install the kernel file. Once it has finished installation of the kernel file, it will search for a (nonexistent) rootfs file — when it begins searching for this file, shut down the WD03 by holding the power button normally. - Start up your WD03 normally. Signed-off-by: Matthias Badaire <mbadaire@gmail.com>
2018-04-15 20:34:05 +00:00
define Device/ravpower_wd03
DTS := WD03
IMAGE_SIZE := $(ralink_default_fw_size_8M)
DEVICE_TITLE := Ravpower WD03
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-usb-ehci
endef
TARGET_DEVICES += ravpower_wd03
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/whr-1166d
DTS := WHR-1166D
IMAGE_SIZE := 15040k
DEVICE_TITLE := Buffalo WHR-1166D
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += whr-1166d
define Device/whr-300hp2
DTS := WHR-300HP2
IMAGE_SIZE := 6848k
DEVICE_TITLE := Buffalo WHR-300HP2
endef
TARGET_DEVICES += whr-300hp2
define Device/whr-600d
DTS := WHR-600D
IMAGE_SIZE := 6848k
DEVICE_TITLE := Buffalo WHR-600D
endef
TARGET_DEVICES += whr-600d
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
define Device/wmr-300
DTS := WMR-300
DEVICE_TITLE := Buffalo WMR-300
endef
TARGET_DEVICES += wmr-300
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/wn3000rpv3
NETGEAR_HW_ID := 29764836+8+0+32+2x2+0
NETGEAR_BOARD_ID := WN3000RPv3
DTS := WN3000RPV3
BLOCKSIZE := 4k
IMAGES += factory.bin
build: consolidate fake uImage header build commands Merge the two existing functions and use a parameter for the type header field. It updates the syntax of the former mpc85xx fake ramdisk header command to be compatible with mkimage from u-boot 2018.03 and fixes the build error spotted by the build bot. Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-04-20 04:30:46 +00:00
KERNEL := $(KERNEL_DTB) | uImage lzma | pad-offset 64k 64 | append-uImage-fakehdr filesystem
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
netgear-dni
DEVICE_TITLE := Netgear WN3000RPv3
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += wn3000rpv3
define Device/wrh-300cr
DTS := WRH-300CR
IMAGE_SIZE := $(ralink_default_fw_size_16M)
IMAGES += factory.bin
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
elecom-header
DEVICE_TITLE := Elecom WRH-300CR
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += wrh-300cr
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
define Device/wrtnode
DTS := WRTNODE
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := WRTNode
endef
TARGET_DEVICES += wrtnode
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/wt3020-4M
DTS := WT3020-4M
BLOCKSIZE := 4k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
IMAGES += factory.bin
ramips: add former used board names to metadata We need to keep the former used (unmodified) boardname in the metadata. Otherwise an upgrade from an board using the old boardname will be refused. Fixes: a75ce960ac1b ("ramips: use different board names for variants") Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-01 10:27:46 +00:00
SUPPORTED_DEVICES += wt3020
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
poray-header -B WT3020 -F 4M
DEVICE_TITLE := Nexx WT3020 (4MB)
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += wt3020-4M
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/wt3020-8M
DTS := WT3020-8M
IMAGES += factory.bin
ramips: add former used board names to metadata We need to keep the former used (unmodified) boardname in the metadata. Otherwise an upgrade from an board using the old boardname will be refused. Fixes: a75ce960ac1b ("ramips: use different board names for variants") Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-01 10:27:46 +00:00
SUPPORTED_DEVICES += wt3020
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
poray-header -B WT3020 -F 8M
DEVICE_TITLE := Nexx WT3020 (8MB)
ramips: fix default usb support for nexx wt3020-8M the nexx wt3020-8M has a usb 2.0 port, add usb 2.0 support packages to its default package list. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-10-21 21:53:49 +00:00
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += wt3020-8M
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/y1
DTS := Y1
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
IMAGE_SIZE := $(ralink_default_fw_size_16M)
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
DEVICE_TITLE := Lenovo Y1
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += y1
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/y1s
DTS := Y1S
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
IMAGE_SIZE := $(ralink_default_fw_size_16M)
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
DEVICE_TITLE := Lenovo Y1S
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += y1s
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
define Device/youku-yk1
DTS := YOUKU-YK1
ramips: fix Youku-YK1 support Remove the ephy-pins from the ethernet device tree node. The ephy-pins are useed to controll the ePHY LEDs and this board doesn't have these. Instead one of the ePHY pins is used in GPIO mode to control the WAN LED. Use the switch LED trigger to control the WAN LED. Move the power LED handling to diag.sh to show the boot status via this LED. Add the missing kernel packages for USB and microSD card reader to the default package selection. Fix the maximum image size value. The board has a 32MByte flash chip. Fixes: FS#1055 Signed-off-by: Edmunt Pienkowsky <roed@onet.eu> [make the commit message more verbose, remove GPIO pinmux for pins not used as GPIOs] Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-21 09:07:43 +00:00
IMAGE_SIZE := $(ralink_default_fw_size_32M)
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
DEVICE_TITLE := YOUKU YK1
ramips: fix Youku-YK1 support Remove the ephy-pins from the ethernet device tree node. The ephy-pins are useed to controll the ePHY LEDs and this board doesn't have these. Instead one of the ePHY pins is used in GPIO mode to control the WAN LED. Use the switch LED trigger to control the WAN LED. Move the power LED handling to diag.sh to show the boot status via this LED. Add the missing kernel packages for USB and microSD card reader to the default package selection. Fix the maximum image size value. The board has a 32MByte flash chip. Fixes: FS#1055 Signed-off-by: Edmunt Pienkowsky <roed@onet.eu> [make the commit message more verbose, remove GPIO pinmux for pins not used as GPIOs] Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-21 09:07:43 +00:00
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
endef
TARGET_DEVICES += youku-yk1
ramips: Add support for ZBT WE1026-5G The ZBT WE1026-5G (http://www.zbtlink.com/products/router/WE1026-5G.html) is the follow-up to the ZBT WE1026 and is based on MT7620. For the previous WE1026, the ZBT WE826 image could be used. However, as the name implies, the -5G comes equipped with a 5GHz wifi radio. As the WE826 only has a 2.4GHz radio, the addition of 5GHz means that a separate image is needed for the WE1026-5G. I suspect that this image will also work on the previous WE1026, but I don't have a device to test with. The WE1026-5G has following specifications: * CPU: MT7620A * 1x 10/100Mbps Ethernet. * 16 MB Flash. * 64 MB RAM. * 1x USB 2.0 port. * 1x mini-PCIe slots. * 1x SIM slots. * 1x 2.4Ghz WIFI. * 1x 5GHz wifi (MT7612) * 1x button. * 3x controllable LEDs. Works: * Wifi. * Switch. * mini-PCIe slot. Only tested with a USB device (a modem). * SIM slot. * Sysupgrade. * Button (reset). Not working: * The 5GHz WIFI LED is completely dead. I suspect the issue is the same as on other devices with Mediatek 5Ghz wifi-cards/chips. The LED is controlled by the driver, and mt76 (currently) does not support this. Not tested: * SD card reader. Notes: * The modem (labeled 3G/4G) and power LEDs are controlled by the hardware. * There is a 32MB version of this device available, but I do not have access to it. I have therefor only added support for the 16MB version, but added all the required infrastructure to make adding support for the 32MB version easy. Installation: The router comes pre-installed with OpenWRT, including a variant of Luci. The initial firmware install can be done through this UI, following normal procedure. I.e., access the UI and update the firmware using the sysupgrade-image. Remember to select that you do not want to keep existing settings. Recovery: If you brick the device, the WE1026-5G supports recovery using HTTP. Keep the reset button pressed for ~5sec when booting to start the web server. Set the address of the network interface on your machine to 192.168.1.2/24, and point your browser to 192.168.1.1 to access the recovery UI. From the recovery UI you can upload a firmware image. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
2017-09-10 12:44:47 +00:00
define Device/we1026-5g-16m
DTS := WE1026-5G-16M
IMAGE_SIZE := 16777216
SUPPORTED_DEVICES += we1026-5g-16m
DEVICE_TITLE := Zbtlink ZBT-WE1026-5G (16M)
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-sdhci-mt7620
endef
TARGET_DEVICES += we1026-5g-16m
ramips: add suport for ZBT APE522II The ZBT APE522II is a dual-radio outdoor CPE based on the MT7620a SoC. It has 64 MB RAM, 8 MB flash, 2 Fast Ethernet ports via internal switch (one with 802.3af 48V PoE support), a 802.11b/g/n SoC 2.4 GHz radio and an 802.11a/n/ac MT7612E-based 5 GHz radio. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2016-06-23 08:58:08 +00:00
define Device/zbt-ape522ii
DTS := ZBT-APE522II
DEVICE_TITLE := Zbtlink ZBT-APE522II
DEVICE_PACKAGES := kmod-mt76
endef
TARGET_DEVICES += zbt-ape522ii
ramips: Add support for ZBT-CPE102 - CPU: MT7620N 580MHz - Flash: 8MB - RAM: 64MB - build-in minipcie slot for modem 3G/4G - one ethernet port 10/100Mbps Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2016-09-25 19:09:31 +00:00
define Device/zbt-cpe102
DTS := ZBT-CPE102
DEVICE_TITLE := Zbtlink ZBT-CPE102
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
TARGET_DEVICES += zbt-cpe102
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
define Device/zbt-wa05
DTS := ZBT-WA05
DEVICE_TITLE := Zbtlink ZBT-WA05
endef
TARGET_DEVICES += zbt-wa05
ramips: add support for Zbtlink ZBT-WE2026 This patch adds support for the Zbtlink ZBT-WE2026. Specification: - SoC: MediaTek MT7620N (580MHz) - RAM: 64 MiB - Flash: 8 MiB SPI - LAN: 4x100M - WAN: 1x100M Installation through bootloader webserver: - With the power unplugged press and hold reset button. - Plug power and hold reset button until LED starts to blink. - Install sysupgrade image using web interface on 192.168.1.1. Signed-off-by: Vaclav Svoboda <svoboda@neng.cz>
2017-03-15 08:37:05 +00:00
define Device/zbt-we2026
DTS := ZBT-WE2026
DEVICE_TITLE := Zbtlink ZBT-WE2026
endef
TARGET_DEVICES += zbt-we2026
ramips: add ZBT-WE826 32MB variant The ZBT-WG826 is available with 16 or 32 MByte of flash. Split the device tree source file, rename the currently supported 16 MByte version and add the 32 MByte variant. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-12 05:53:56 +00:00
define Device/zbt-we826-16M
DTS := ZBT-WE826-16M
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
IMAGE_SIZE := $(ralink_default_fw_size_16M)
ramips: add ZBT-WE826 32MB variant The ZBT-WG826 is available with 16 or 32 MByte of flash. Split the device tree source file, rename the currently supported 16 MByte version and add the 32 MByte variant. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-12 05:53:56 +00:00
SUPPORTED_DEVICES += zbt-we826
DEVICE_TITLE := Zbtlink ZBT-WE826 (16M)
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-sdhci-mt7620
endef
ramips: add ZBT-WE826 32MB variant The ZBT-WG826 is available with 16 or 32 MByte of flash. Split the device tree source file, rename the currently supported 16 MByte version and add the 32 MByte variant. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-12 05:53:56 +00:00
TARGET_DEVICES += zbt-we826-16M
define Device/zbt-we826-32M
DTS := ZBT-WE826-32M
IMAGE_SIZE := $(ralink_default_fw_size_32M)
DEVICE_TITLE := Zbtlink ZBT-WE826 (32M)
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76 kmod-sdhci-mt7620
endef
TARGET_DEVICES += zbt-we826-32M
ramips: convert mt7620 to new image building code Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 12:04:40 +00:00
define Device/zbt-wr8305rt
DTS := ZBT-WR8305RT
DEVICE_TITLE := Zbtlink ZBT-WR8305RT
endef
TARGET_DEVICES += zbt-wr8305rt
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
define Device/zte-q7
DTS := ZTE-Q7
DEVICE_TITLE := ZTE Q7
ramips: add support for Sanlinking D240 The Sanlinking Technologies D240 (http://www.sanlinking.com/en/29-dual-4g-wifi-router.html) is basically the same device as the ZBT WE826, so adding support for it in LEDE is straight forward. The differences is that the D240 has two mini-PCIe slots (instead of one), blue LEDs and supports PoE. Specification: * CPU: MT7620A * 1x 10/100Mbps POE (802.3af/802.3at) Ethernet, 4x 10/100Mbps. * 16 MB Flash. * 128 MB RAM. * 1x USB 2.0 port. * 2x mini-PCIe slots. * 2x SIM slots. * 1x 2.4Ghz WIFI. * 1x button. Wifi, USB, switch and both mini-PCIe slots are working. I have not been able to test the SD card reader. The device comes pre-installed with an older version of OpenWRT, including Luci. In order to install LEDE, you need to follow the existing procedure for updating OpenWRT/LEDE using Luci. I.e., you need to access the UI and update the firmware using the sysupgrade-image. Remember to select that you do not want to keep existing settings. The default router address is 192.168.10.1 and username/password admin/root (at least on my devices). If you brick the device, the procedure for recovery is the same as for the WE826. Please see the wiki page for that device for instructions. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
2017-02-04 20:28:52 +00:00
endef
ramips: sort mt7620 image file alphabetical Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 23:07:19 +00:00
TARGET_DEVICES += zte-q7
Reference in a new issue Copy permalink