openwrtv3/target/linux/ipq806x/patches-4.1/703-stmmac-add-fixed-link-device-tree-support.patch

From 3a95f75867be562cb919ff23a738f70357188fbd Mon Sep 17 00:00:00 2001
From: Mathieu Olivari <mathieu@codeaurora.org>
Date: Fri, 8 May 2015 16:02:03 -0700
Subject: [PATCH 3/8] stmmac: add fixed-link device-tree support

In case DT is used, this change adds the ability to the stmmac driver to
detect a fixed-link PHY, instanciate it, and use it during
phy_connect().

Fixed link PHYs DT usage is described in:
Documentation/devicetree/bindings/net/fixed-link.txt

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c     |  2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 12 +++++++++++-
 2 files changed, 12 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -856,7 +856,7 @@ static int stmmac_init_phy(struct net_de
 	 * device as well.
 	 * Note: phydev->phy_id is the result of reading the UID PHY registers.
 	 */
-	if (phydev->phy_id == 0) {
+	if (!priv->plat->phy_node && phydev->phy_id == 0) {
 		phy_disconnect(phydev);
 		return -ENODEV;
 	}
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -177,6 +177,14 @@ static int stmmac_probe_config_dt(struct
 	/* If we find a phy-handle property, use it as the PHY */
 	plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
 
+	/* If phy-handle is not specified, check if we have a fixed-phy */
+	if (!plat->phy_node && of_phy_is_fixed_link(np)) {
+		if ((of_phy_register_fixed_link(np) < 0))
+			return -ENODEV;
+
+		plat->phy_node = of_node_get(np);
+	}
+
 	/* "snps,phy-addr" is not a standard property. Mark it as deprecated
 	 * and warn of its use. Remove this when phy node support is added.
 	 */
@@ -243,7 +251,7 @@ static int stmmac_probe_config_dt(struct
 				       GFP_KERNEL);
 		if (!dma_cfg) {
 			ret = -ENOMEM;
-			goto err;
+			goto err2;
 		}
 		plat->dma_cfg = dma_cfg;
 		of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
@@ -263,6 +271,8 @@ static int stmmac_probe_config_dt(struct
 
 	return 0;
 
+err2:
+	of_node_put(np);
 err:
 	return ret;
 }