openwrtv3/target/linux/generic/files/drivers/net/phy/swconfig_leds.c

557 lines
13 KiB
C
Raw Normal View History

/*
* swconfig_led.c: LED trigger support for the switch configuration API
*
* Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*/
#ifdef CONFIG_SWCONFIG_LEDS
#include <linux/leds.h>
#include <linux/ctype.h>
#include <linux/device.h>
#include <linux/workqueue.h>
#define SWCONFIG_LED_TIMER_INTERVAL (HZ / 10)
#define SWCONFIG_LED_NUM_PORTS 32
#define SWCONFIG_LED_PORT_SPEED_NA 0x01 /* unknown speed */
#define SWCONFIG_LED_PORT_SPEED_10 0x02 /* 10 Mbps */
#define SWCONFIG_LED_PORT_SPEED_100 0x04 /* 100 Mbps */
#define SWCONFIG_LED_PORT_SPEED_1000 0x08 /* 1000 Mbps */
#define SWCONFIG_LED_PORT_SPEED_ALL (SWCONFIG_LED_PORT_SPEED_NA | \
SWCONFIG_LED_PORT_SPEED_10 | \
SWCONFIG_LED_PORT_SPEED_100 | \
SWCONFIG_LED_PORT_SPEED_1000)
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
#define SWCONFIG_LED_MODE_LINK 0x01
#define SWCONFIG_LED_MODE_TX 0x02
#define SWCONFIG_LED_MODE_RX 0x04
#define SWCONFIG_LED_MODE_TXRX (SWCONFIG_LED_MODE_TX | \
SWCONFIG_LED_MODE_RX)
#define SWCONFIG_LED_MODE_ALL (SWCONFIG_LED_MODE_LINK | \
SWCONFIG_LED_MODE_TX | \
SWCONFIG_LED_MODE_RX)
struct switch_led_trigger {
struct led_trigger trig;
struct switch_dev *swdev;
struct delayed_work sw_led_work;
u32 port_mask;
u32 port_link;
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
unsigned long long port_tx_traffic[SWCONFIG_LED_NUM_PORTS];
unsigned long long port_rx_traffic[SWCONFIG_LED_NUM_PORTS];
u8 link_speed[SWCONFIG_LED_NUM_PORTS];
};
struct swconfig_trig_data {
struct led_classdev *led_cdev;
struct switch_dev *swdev;
rwlock_t lock;
u32 port_mask;
bool prev_link;
unsigned long prev_traffic;
enum led_brightness prev_brightness;
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
u8 mode;
u8 speed_mask;
};
static void
swconfig_trig_set_brightness(struct swconfig_trig_data *trig_data,
enum led_brightness brightness)
{
led_set_brightness(trig_data->led_cdev, brightness);
trig_data->prev_brightness = brightness;
}
static void
swconfig_trig_update_port_mask(struct led_trigger *trigger)
{
struct list_head *entry;
struct switch_led_trigger *sw_trig;
u32 port_mask;
if (!trigger)
return;
sw_trig = (void *) trigger;
port_mask = 0;
read_lock(&trigger->leddev_list_lock);
list_for_each(entry, &trigger->led_cdevs) {
struct led_classdev *led_cdev;
struct swconfig_trig_data *trig_data;
led_cdev = list_entry(entry, struct led_classdev, trig_list);
trig_data = led_cdev->trigger_data;
if (trig_data) {
read_lock(&trig_data->lock);
port_mask |= trig_data->port_mask;
read_unlock(&trig_data->lock);
}
}
read_unlock(&trigger->leddev_list_lock);
sw_trig->port_mask = port_mask;
if (port_mask)
schedule_delayed_work(&sw_trig->sw_led_work,
SWCONFIG_LED_TIMER_INTERVAL);
else
cancel_delayed_work_sync(&sw_trig->sw_led_work);
}
static ssize_t
swconfig_trig_port_mask_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct swconfig_trig_data *trig_data = led_cdev->trigger_data;
unsigned long port_mask;
int ret;
bool changed;
ret = kstrtoul(buf, 0, &port_mask);
if (ret)
return ret;
write_lock(&trig_data->lock);
changed = (trig_data->port_mask != port_mask);
trig_data->port_mask = port_mask;
write_unlock(&trig_data->lock);
if (changed) {
if (port_mask == 0)
swconfig_trig_set_brightness(trig_data, LED_OFF);
swconfig_trig_update_port_mask(led_cdev->trigger);
}
return size;
}
static ssize_t
swconfig_trig_port_mask_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct swconfig_trig_data *trig_data = led_cdev->trigger_data;
u32 port_mask;
read_lock(&trig_data->lock);
port_mask = trig_data->port_mask;
read_unlock(&trig_data->lock);
sprintf(buf, "%#x\n", port_mask);
return strlen(buf) + 1;
}
static DEVICE_ATTR(port_mask, 0644, swconfig_trig_port_mask_show,
swconfig_trig_port_mask_store);
/* speed_mask file handler - display value */
static ssize_t swconfig_trig_speed_mask_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct swconfig_trig_data *trig_data = led_cdev->trigger_data;
u8 speed_mask;
read_lock(&trig_data->lock);
speed_mask = trig_data->speed_mask;
read_unlock(&trig_data->lock);
sprintf(buf, "%#x\n", speed_mask);
return strlen(buf) + 1;
}
/* speed_mask file handler - store value */
static ssize_t swconfig_trig_speed_mask_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct swconfig_trig_data *trig_data = led_cdev->trigger_data;
u8 speed_mask;
int ret;
ret = kstrtou8(buf, 0, &speed_mask);
if (ret)
return ret;
write_lock(&trig_data->lock);
trig_data->speed_mask = speed_mask & SWCONFIG_LED_PORT_SPEED_ALL;
write_unlock(&trig_data->lock);
return size;
}
/* speed_mask special file */
static DEVICE_ATTR(speed_mask, 0644, swconfig_trig_speed_mask_show,
swconfig_trig_speed_mask_store);
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
static ssize_t swconfig_trig_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct swconfig_trig_data *trig_data = led_cdev->trigger_data;
u8 mode;
read_lock(&trig_data->lock);
mode = trig_data->mode;
read_unlock(&trig_data->lock);
if (mode == 0) {
strcpy(buf, "none\n");
} else {
if (mode & SWCONFIG_LED_MODE_LINK)
strcat(buf, "link ");
if (mode & SWCONFIG_LED_MODE_TX)
strcat(buf, "tx ");
if (mode & SWCONFIG_LED_MODE_RX)
strcat(buf, "rx ");
strcat(buf, "\n");
}
return strlen(buf)+1;
}
static ssize_t swconfig_trig_mode_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct swconfig_trig_data *trig_data = led_cdev->trigger_data;
char copybuf[128];
int new_mode = -1;
char *p, *token;
/* take a copy since we don't want to trash the inbound buffer when using strsep */
strncpy(copybuf, buf, sizeof(copybuf));
copybuf[sizeof(copybuf) - 1] = 0;
p = copybuf;
while ((token = strsep(&p, " \t\n")) != NULL) {
if (!*token)
continue;
if (new_mode < 0)
new_mode = 0;
if (!strcmp(token, "none"))
new_mode = 0;
else if (!strcmp(token, "tx"))
new_mode |= SWCONFIG_LED_MODE_TX;
else if (!strcmp(token, "rx"))
new_mode |= SWCONFIG_LED_MODE_RX;
else if (!strcmp(token, "link"))
new_mode |= SWCONFIG_LED_MODE_LINK;
else
return -EINVAL;
}
if (new_mode < 0)
return -EINVAL;
write_lock(&trig_data->lock);
trig_data->mode = (u8)new_mode;
write_unlock(&trig_data->lock);
return size;
}
/* mode special file */
static DEVICE_ATTR(mode, 0644, swconfig_trig_mode_show,
swconfig_trig_mode_store);
static void
swconfig_trig_activate(struct led_classdev *led_cdev)
{
struct switch_led_trigger *sw_trig;
struct swconfig_trig_data *trig_data;
int err;
if (led_cdev->trigger->activate != swconfig_trig_activate)
return;
trig_data = kzalloc(sizeof(struct swconfig_trig_data), GFP_KERNEL);
if (!trig_data)
return;
sw_trig = (void *) led_cdev->trigger;
rwlock_init(&trig_data->lock);
trig_data->led_cdev = led_cdev;
trig_data->swdev = sw_trig->swdev;
trig_data->speed_mask = SWCONFIG_LED_PORT_SPEED_ALL;
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
trig_data->mode = SWCONFIG_LED_MODE_ALL;
led_cdev->trigger_data = trig_data;
err = device_create_file(led_cdev->dev, &dev_attr_port_mask);
if (err)
goto err_free;
err = device_create_file(led_cdev->dev, &dev_attr_speed_mask);
if (err)
goto err_dev_free;
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
err = device_create_file(led_cdev->dev, &dev_attr_mode);
if (err)
goto err_mode_free;
return;
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
err_mode_free:
device_remove_file(led_cdev->dev, &dev_attr_speed_mask);
err_dev_free:
device_remove_file(led_cdev->dev, &dev_attr_port_mask);
err_free:
led_cdev->trigger_data = NULL;
kfree(trig_data);
}
static void
swconfig_trig_deactivate(struct led_classdev *led_cdev)
{
struct swconfig_trig_data *trig_data;
swconfig_trig_update_port_mask(led_cdev->trigger);
trig_data = (void *) led_cdev->trigger_data;
if (trig_data) {
device_remove_file(led_cdev->dev, &dev_attr_port_mask);
device_remove_file(led_cdev->dev, &dev_attr_speed_mask);
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
device_remove_file(led_cdev->dev, &dev_attr_mode);
kfree(trig_data);
}
}
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
/*
* link off -> led off (can't be any other reason to turn it on)
* link on:
* mode link: led on by default only if speed matches, else off
* mode txrx: blink only if speed matches, else off
*/
static void
swconfig_trig_led_event(struct switch_led_trigger *sw_trig,
struct led_classdev *led_cdev)
{
struct swconfig_trig_data *trig_data;
u32 port_mask;
bool link;
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
u8 speed_mask, mode;
enum led_brightness led_base, led_blink;
trig_data = led_cdev->trigger_data;
if (!trig_data)
return;
read_lock(&trig_data->lock);
port_mask = trig_data->port_mask;
speed_mask = trig_data->speed_mask;
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
mode = trig_data->mode;
read_unlock(&trig_data->lock);
link = !!(sw_trig->port_link & port_mask);
if (!link) {
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
if (trig_data->prev_brightness != LED_OFF)
swconfig_trig_set_brightness(trig_data, LED_OFF); /* and stop */
}
else {
unsigned long traffic;
int speedok; /* link speed flag */
int i;
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
led_base = LED_FULL;
led_blink = LED_OFF;
traffic = 0;
speedok = 0;
for (i = 0; i < SWCONFIG_LED_NUM_PORTS; i++) {
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
if (port_mask & (1 << i)) {
if (sw_trig->link_speed[i] & speed_mask) {
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
traffic += ((mode & SWCONFIG_LED_MODE_TX) ?
sw_trig->port_tx_traffic[i] : 0) +
((mode & SWCONFIG_LED_MODE_RX) ?
sw_trig->port_rx_traffic[i] : 0);
speedok = 1;
}
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
}
}
if (speedok) {
/* At least one port speed matches speed_mask */
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
if (!(mode & SWCONFIG_LED_MODE_LINK)) {
led_base = LED_OFF;
led_blink = LED_FULL;
}
if (trig_data->prev_brightness != led_base)
swconfig_trig_set_brightness(trig_data,
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
led_base);
else if (traffic != trig_data->prev_traffic)
swconfig_trig_set_brightness(trig_data,
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
led_blink);
} else if (trig_data->prev_brightness != LED_OFF)
swconfig_trig_set_brightness(trig_data, LED_OFF);
trig_data->prev_traffic = traffic;
}
trig_data->prev_link = link;
}
static void
swconfig_trig_update_leds(struct switch_led_trigger *sw_trig)
{
struct list_head *entry;
struct led_trigger *trigger;
trigger = &sw_trig->trig;
read_lock(&trigger->leddev_list_lock);
list_for_each(entry, &trigger->led_cdevs) {
struct led_classdev *led_cdev;
led_cdev = list_entry(entry, struct led_classdev, trig_list);
swconfig_trig_led_event(sw_trig, led_cdev);
}
read_unlock(&trigger->leddev_list_lock);
}
static void
swconfig_led_work_func(struct work_struct *work)
{
struct switch_led_trigger *sw_trig;
struct switch_dev *swdev;
u32 port_mask;
u32 link;
int i;
sw_trig = container_of(work, struct switch_led_trigger,
sw_led_work.work);
port_mask = sw_trig->port_mask;
swdev = sw_trig->swdev;
link = 0;
for (i = 0; i < SWCONFIG_LED_NUM_PORTS; i++) {
u32 port_bit;
sw_trig->link_speed[i] = 0;
port_bit = BIT(i);
if ((port_mask & port_bit) == 0)
continue;
if (swdev->ops->get_port_link) {
struct switch_port_link port_link;
memset(&port_link, '\0', sizeof(port_link));
swdev->ops->get_port_link(swdev, i, &port_link);
if (port_link.link) {
link |= port_bit;
switch (port_link.speed) {
case SWITCH_PORT_SPEED_UNKNOWN:
sw_trig->link_speed[i] =
SWCONFIG_LED_PORT_SPEED_NA;
break;
case SWITCH_PORT_SPEED_10:
sw_trig->link_speed[i] =
SWCONFIG_LED_PORT_SPEED_10;
break;
case SWITCH_PORT_SPEED_100:
sw_trig->link_speed[i] =
SWCONFIG_LED_PORT_SPEED_100;
break;
case SWITCH_PORT_SPEED_1000:
sw_trig->link_speed[i] =
SWCONFIG_LED_PORT_SPEED_1000;
break;
}
}
}
if (swdev->ops->get_port_stats) {
struct switch_port_stats port_stats;
memset(&port_stats, '\0', sizeof(port_stats));
swdev->ops->get_port_stats(swdev, i, &port_stats);
generic: swconfig: add mode led attribute Add sysfs 'mode' attribute to swconfig controlled LEDs. swconfig 'link state' LEDs blink in the presence of port traffic. This behaviour becomes more obvious as switches start to support get_port_stats() e.g. commits 0369e358916ef092a1644334f5dd1412051b68a4, 3056d09b4046e0eb0f6de0f3f5432cd9fa86fc51, 4ddbc43cc15c2fa128a2f169964ef7eb508cf2c5, 4d8a66d9346373c2a7fcac5bdae3f662a9dbd9df. This blinking can be confusing/distracting if the switch has other LEDs used to indicate traffic. Provide a 'mode' sysfs attribute that controls the blink on traffic behaviour. mode - either "none" (LED is off) or a space separated list of one or more: link: LED's normal state reflects whether the link is up (has carrier) or not tx: LED blinks on transmitted data rx: LED blinks on receive data Note that 'link' considers any port speed mask that may be applicable. e.g. if an LED is configured to indicate 1Gbit link speed and mode is set to 'link rx tx' but the port is connected at 100Mbit then the LED will not light or blink. A mode of 'tx rx' will blink in the presence of traffic only if the port matches the rate (if configured) This maintains compatibility with existing behaviour. Attribute is 'link tx rx' by default for backwards compatible behaviour. Many thanks to Thibaut Varene for providing a more sensible led_event routine after I had mangled the original, and other coding style hints. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Thibaut VARENE <hacks@slashdirt.org>
2018-02-13 13:53:49 +00:00
sw_trig->port_tx_traffic[i] = port_stats.tx_bytes;
sw_trig->port_rx_traffic[i] = port_stats.rx_bytes;
}
}
sw_trig->port_link = link;
swconfig_trig_update_leds(sw_trig);
schedule_delayed_work(&sw_trig->sw_led_work,
SWCONFIG_LED_TIMER_INTERVAL);
}
static int
swconfig_create_led_trigger(struct switch_dev *swdev)
{
struct switch_led_trigger *sw_trig;
int err;
if (!swdev->ops->get_port_link)
return 0;
sw_trig = kzalloc(sizeof(struct switch_led_trigger), GFP_KERNEL);
if (!sw_trig)
return -ENOMEM;
sw_trig->swdev = swdev;
sw_trig->trig.name = swdev->devname;
sw_trig->trig.activate = swconfig_trig_activate;
sw_trig->trig.deactivate = swconfig_trig_deactivate;
INIT_DELAYED_WORK(&sw_trig->sw_led_work, swconfig_led_work_func);
err = led_trigger_register(&sw_trig->trig);
if (err)
goto err_free;
swdev->led_trigger = sw_trig;
return 0;
err_free:
kfree(sw_trig);
return err;
}
static void
swconfig_destroy_led_trigger(struct switch_dev *swdev)
{
struct switch_led_trigger *sw_trig;
sw_trig = swdev->led_trigger;
if (sw_trig) {
cancel_delayed_work_sync(&sw_trig->sw_led_work);
led_trigger_unregister(&sw_trig->trig);
kfree(sw_trig);
}
}
#else /* SWCONFIG_LEDS */
static inline int
swconfig_create_led_trigger(struct switch_dev *swdev) { return 0; }
static inline void
swconfig_destroy_led_trigger(struct switch_dev *swdev) { }
#endif /* CONFIG_SWCONFIG_LEDS */