openwrtv3/target/linux/ramips/patches-3.10/0016-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch

64 lines
1.9 KiB
Diff
Raw Normal View History

From 011f4bdba0dd4d1dff6d33b1a65541fc4f09c78e Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 24 May 2013 21:28:08 +0200
Subject: [PATCH 16/25] MIPS: ralink: mt7620: fix usb issue during frequency
scaling
If the USB HCD is running and the cpu is scaled too low, then the USB stops
working. Increase the idle speed of the core to fix this if the kernel is
built with USB support.
The values are taken from the Ralink SDK Kernel.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/include/asm/mach-ralink/mt7620.h | 1 +
arch/mips/ralink/mt7620.c | 19 +++++++++++++++++++
2 files changed, 20 insertions(+)
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -20,6 +20,7 @@
#define SYSC_REG_CHIP_REV 0x0c
#define SYSC_REG_SYSTEM_CONFIG0 0x10
#define SYSC_REG_SYSTEM_CONFIG1 0x14
+#define SYSC_REG_CPU_SYS_CLKCFG 0x3c
#define SYSC_REG_CPLL_CONFIG0 0x54
#define SYSC_REG_CPLL_CONFIG1 0x58
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -20,6 +20,12 @@
#include "common.h"
+/* clock scaling */
+#define CLKCFG_FDIV_MASK 0x1f00
+#define CLKCFG_FDIV_USB_VAL 0x0300
+#define CLKCFG_FFRAC_MASK 0x001f
+#define CLKCFG_FFRAC_USB_VAL 0x0003
+
/* does the board have sdram or ddram */
static int dram_type;
@@ -170,6 +176,19 @@ void __init ralink_clk_init(void)
ralink_clk_add("10000500.uart", 40000000);
ralink_clk_add("10000b00.spi", 40000000);
ralink_clk_add("10000c00.uartlite", 40000000);
+
+ if (IS_ENABLED(CONFIG_USB)) {
+ /*
+ * When the CPU goes into sleep mode, the BUS clock will be too low for
+ * USB to function properly
+ */
+ u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+ val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK);
+ val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL;
+
+ rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG);
+ }
}
void __init ralink_of_remap(void)