openwrtv3/target/linux/ifxmips/files/drivers/char/danube_led.c

198 lines
4.8 KiB
C
Raw Normal View History

/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*
* Copyright (C) 2006 infineon
* Copyright (C) 2007 John Crispin <blogic@openwrt.org>
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/version.h>
#include <linux/types.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
#include <linux/errno.h>
#include <asm/danube/danube.h>
#include <asm/danube/danube_gpio.h>
#include <asm/danube/danube_pmu.h>
#define DANUBE_LED_CLK_EDGE DANUBE_LED_FALLING
//#define DANUBE_LED_CLK_EDGE DANUBE_LED_RISING
#define DANUBE_LED_SPEED DANUBE_LED_8HZ
#define DANUBE_LED_GPIO_PORT 0
static int danube_led_major;
void
danube_led_set (unsigned int led)
{
led &= 0xffffff;
writel(readl(DANUBE_LED_CPU0) | led, DANUBE_LED_CPU0);
}
EXPORT_SYMBOL(danube_led_set);
void
danube_led_clear (unsigned int led)
{
led = ~(led & 0xffffff);
writel(readl(DANUBE_LED_CPU0) & led, DANUBE_LED_CPU0);
}
EXPORT_SYMBOL(danube_led_clear);
void
danube_led_blink_set (unsigned int led)
{
led &= 0xffffff;
writel(readl(DANUBE_LED_CON0) | led, DANUBE_LED_CON0);
}
EXPORT_SYMBOL(danube_led_blink_set);
void
danube_led_blink_clear (unsigned int led)
{
led = ~(led & 0xffffff);
writel(readl(DANUBE_LED_CON0) & led, DANUBE_LED_CON0);
}
EXPORT_SYMBOL(danube_led_blink_clear);
void
danube_led_setup_gpio (void)
{
int i = 0;
/* we need to setup pins SH,D,ST (4,5,6) */
for (i = 4; i < 7; i++)
{
danube_port_set_altsel0(DANUBE_LED_GPIO_PORT, i);
danube_port_clear_altsel1(DANUBE_LED_GPIO_PORT, i);
danube_port_set_dir_out(DANUBE_LED_GPIO_PORT, i);
danube_port_set_open_drain(DANUBE_LED_GPIO_PORT, i);
}
}
static int
led_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
int ret = -EINVAL;
switch ( cmd )
{
}
return ret;
}
static int
led_open (struct inode *inode, struct file *file)
{
return 0;
}
static int
led_release (struct inode *inode, struct file *file)
{
return 0;
}
static struct file_operations danube_led_fops = {
.owner = THIS_MODULE,
.ioctl = led_ioctl,
.open = led_open,
.release = led_release
};
/*
Map for LED on reference board
WLAN_READ LED11 OUT1 15
WARNING LED12 OUT2 14
FXS1_LINK LED13 OUT3 13
FXS2_LINK LED14 OUT4 12
FXO_ACT LED15 OUT5 11
USB_LINK LED16 OUT6 10
ADSL2_LINK LED19 OUT7 9
BT_LINK LED17 OUT8 8
SD_LINK LED20 OUT9 7
ADSL2_TRAFFIC LED31 OUT16 0
Map for hardware relay on reference board
USB Power On OUT11 5
RELAY OUT12 4
*/
int __init
danube_led_init (void)
{
int ret = 0;
danube_led_setup_gpio();
writel(0, DANUBE_LED_AR);
writel(0, DANUBE_LED_CPU0);
writel(0, DANUBE_LED_CPU1);
writel(LED_CON0_SWU, DANUBE_LED_CON0);
writel(0, DANUBE_LED_CON1);
/* setup the clock edge that the shift register is triggered on */
writel(readl(DANUBE_LED_CON0) & ~DANUBE_LED_EDGE_MASK, DANUBE_LED_CON0);
writel(readl(DANUBE_LED_CON0) | DANUBE_LED_CLK_EDGE, DANUBE_LED_CON0);
/* per default leds 15-0 are set */
writel(DANUBE_LED_GROUP1 | DANUBE_LED_GROUP0, DANUBE_LED_CON1);
/* leds are update periodically by the FPID */
writel(readl(DANUBE_LED_CON1) & ~DANUBE_LED_UPD_MASK, DANUBE_LED_CON1);
writel(readl(DANUBE_LED_CON1) | DANUBE_LED_UPD_SRC_FPI, DANUBE_LED_CON1);
/* set led update speed */
writel(readl(DANUBE_LED_CON1) & ~DANUBE_LED_MASK, DANUBE_LED_CON1);
writel(readl(DANUBE_LED_CON1) | DANUBE_LED_SPEED, DANUBE_LED_CON1);
/* adsl 0 and 1 leds are updated by the arc */
writel(readl(DANUBE_LED_CON0) | DANUBE_LED_ADSL_SRC, DANUBE_LED_CON0);
/* per default, the leds are turned on */
danube_pmu_enable(DANUBE_PMU_PWDCR_LED);
danube_led_major = register_chrdev(0, "danube_led", &danube_led_fops);
if (!danube_led_major)
{
printk("danube_led: Error! Could not register device. %d\n", danube_led_major);
ret = -EINVAL;
goto out;
}
printk(KERN_INFO "danube_led : device registered on major %d\n", danube_led_major);
out:
return ret;
}
void __exit
danube_led_exit (void)
{
unregister_chrdev(danube_led_major, "danube_led");
}
module_init(danube_led_init);
module_exit(danube_led_exit);