openwrtv3/target/linux/brcm2708/patches-4.1/0002-Add-bcm2708_gpio-driver.patch

From c7eee1285590f15010feaf91970b9e3447e757f4 Mon Sep 17 00:00:00 2001
From: popcornmix <popcornmix@gmail.com>
Date: Wed, 8 Oct 2014 18:50:05 +0100
Subject: [PATCH 002/222] Add bcm2708_gpio driver

Signed-off-by: popcornmix <popcornmix@gmail.com>

bcm2708: Add extension to configure internal pulls

The bcm2708 gpio controller supports internal pulls to be used as pull-up,
pull-down or being entirely disabled. As it can be useful for a driver to
change the pull configuration from it's default pull-down state, add an
extension which allows configuring the pull per gpio.

Signed-off-by: Julian Scheel <julian@jusst.de>

bcm2708-gpio: Revert the use of pinctrl_request_gpio

In non-DT systems, pinctrl_request_gpio always fails causing
"requests probe deferral" messages. In DT systems, it isn't useful
because the reference counting is independent of the normal pinctrl
pin reservations.

gpio: Only clear the currently occurring interrupt. Avoids losing interrupts

See: linux #760

bcm2708_gpio: Avoid calling irq_unmask for all interrupts

When setting up the interrupts, specify that the handle_simple_irq
handler should be used. This leaves interrupt acknowledgement to
the caller, and prevents irq_unmask from being called for all
interrupts.

Issue: linux #760
---
 arch/arm/mach-bcm2708/Kconfig             |   8 +
 arch/arm/mach-bcm2708/Makefile            |   1 +
 arch/arm/mach-bcm2708/bcm2708.c           |  25 ++
 arch/arm/mach-bcm2708/bcm2708_gpio.c      | 426 ++++++++++++++++++++++++++++++
 arch/arm/mach-bcm2708/include/mach/gpio.h |  17 ++
 arch/arm/mach-bcm2709/bcm2709.c           |  25 ++
 include/linux/platform_data/bcm2708.h     |  23 ++
 7 files changed, 525 insertions(+)
 create mode 100644 arch/arm/mach-bcm2708/bcm2708_gpio.c
 create mode 100644 arch/arm/mach-bcm2708/include/mach/gpio.h
 create mode 100644 include/linux/platform_data/bcm2708.h

--- a/arch/arm/mach-bcm2708/Kconfig
+++ b/arch/arm/mach-bcm2708/Kconfig
@@ -20,6 +20,14 @@ config BCM2708_DT
 	help
 	  Enable Device Tree support for BCM2708
 
+config BCM2708_GPIO
+	bool "BCM2708 gpio support"
+	depends on MACH_BCM2708
+	select ARCH_REQUIRE_GPIOLIB
+        default y
+	help
+	  Include support for the Broadcom(R) BCM2708 gpio.
+
 config BCM2708_NOL2CACHE
 	bool "Videocore L2 cache disable"
 	depends on MACH_BCM2708
--- a/arch/arm/mach-bcm2708/Makefile
+++ b/arch/arm/mach-bcm2708/Makefile
@@ -3,3 +3,4 @@
 #
 
 obj-$(CONFIG_MACH_BCM2708) 	+= bcm2708.o armctrl.o
+obj-$(CONFIG_BCM2708_GPIO)	+= bcm2708_gpio.o
--- a/arch/arm/mach-bcm2708/bcm2708.c
+++ b/arch/arm/mach-bcm2708/bcm2708.c
@@ -298,6 +298,31 @@ static struct platform_device bcm2708_vc
 		},
 };
 
+#ifdef CONFIG_BCM2708_GPIO
+#define BCM_GPIO_DRIVER_NAME "bcm2708_gpio"
+
+static struct resource bcm2708_gpio_resources[] = {
+	[0] = {			/* general purpose I/O */
+	       .start = GPIO_BASE,
+	       .end = GPIO_BASE + SZ_4K - 1,
+	       .flags = IORESOURCE_MEM,
+	       },
+};
+
+static u64 gpio_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
+
+static struct platform_device bcm2708_gpio_device = {
+	.name = BCM_GPIO_DRIVER_NAME,
+	.id = -1,		/* only one VideoCore I/O area */
+	.resource = bcm2708_gpio_resources,
+	.num_resources = ARRAY_SIZE(bcm2708_gpio_resources),
+	.dev = {
+		.dma_mask = &gpio_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
+		},
+};
+#endif
+
 int __init bcm_register_device(struct platform_device *pdev)
 {
 	int ret;
--- /dev/null
+++ b/arch/arm/mach-bcm2708/bcm2708_gpio.c
@@ -0,0 +1,426 @@
+/*
+ *  linux/arch/arm/mach-bcm2708/bcm2708_gpio.c
+ *
+ *  Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <mach/gpio.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <mach/platform.h>
+#include <linux/pinctrl/consumer.h>
+
+#include <linux/platform_data/bcm2708.h>
+
+#define BCM_GPIO_DRIVER_NAME "bcm2708_gpio"
+#define DRIVER_NAME BCM_GPIO_DRIVER_NAME
+#define BCM_GPIO_USE_IRQ 1
+
+#define GPIOFSEL(x)  (0x00+(x)*4)
+#define GPIOSET(x)   (0x1c+(x)*4)
+#define GPIOCLR(x)   (0x28+(x)*4)
+#define GPIOLEV(x)   (0x34+(x)*4)
+#define GPIOEDS(x)   (0x40+(x)*4)
+#define GPIOREN(x)   (0x4c+(x)*4)
+#define GPIOFEN(x)   (0x58+(x)*4)
+#define GPIOHEN(x)   (0x64+(x)*4)
+#define GPIOLEN(x)   (0x70+(x)*4)
+#define GPIOAREN(x)  (0x7c+(x)*4)
+#define GPIOAFEN(x)  (0x88+(x)*4)
+#define GPIOUD(x)    (0x94+(x)*4)
+#define GPIOUDCLK(x) (0x98+(x)*4)
+
+#define GPIO_BANKS 2
+
+enum { GPIO_FSEL_INPUT, GPIO_FSEL_OUTPUT,
+	GPIO_FSEL_ALT5, GPIO_FSEL_ALT_4,
+	GPIO_FSEL_ALT0, GPIO_FSEL_ALT1,
+	GPIO_FSEL_ALT2, GPIO_FSEL_ALT3,
+};
+
+	/* Each of the two spinlocks protects a different set of hardware
+	 * regiters and data structurs. This decouples the code of the IRQ from
+	 * the GPIO code. This also makes the case of a GPIO routine call from
+	 * the IRQ code simpler.
+	 */
+static DEFINE_SPINLOCK(lock);	/* GPIO registers */
+
+struct bcm2708_gpio {
+	struct list_head list;
+	void __iomem *base;
+	struct gpio_chip gc;
+	unsigned long rising[(BCM2708_NR_GPIOS + 31) / 32];
+	unsigned long falling[(BCM2708_NR_GPIOS + 31) / 32];
+	unsigned long high[(BCM2708_NR_GPIOS + 31) / 32];
+	unsigned long low[(BCM2708_NR_GPIOS + 31) / 32];
+};
+
+static int bcm2708_set_function(struct gpio_chip *gc, unsigned offset,
+				int function)
+{
+	struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc);
+	unsigned long flags;
+	unsigned gpiodir;
+	unsigned gpio_bank = offset / 10;
+	unsigned gpio_field_offset = (offset - 10 * gpio_bank) * 3;
+
+//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_set_function %p (%d,%d)\n", gc, offset, function);
+	if (offset >= BCM2708_NR_GPIOS)
+		return -EINVAL;
+
+	spin_lock_irqsave(&lock, flags);
+
+	gpiodir = readl(gpio->base + GPIOFSEL(gpio_bank));
+	gpiodir &= ~(7 << gpio_field_offset);
+	gpiodir |= function << gpio_field_offset;
+	writel(gpiodir, gpio->base + GPIOFSEL(gpio_bank));
+	spin_unlock_irqrestore(&lock, flags);
+	gpiodir = readl(gpio->base + GPIOFSEL(gpio_bank));
+
+	return 0;
+}
+
+static int bcm2708_gpio_dir_in(struct gpio_chip *gc, unsigned offset)
+{
+	return bcm2708_set_function(gc, offset, GPIO_FSEL_INPUT);
+}
+
+static void bcm2708_gpio_set(struct gpio_chip *gc, unsigned offset, int value);
+static int bcm2708_gpio_dir_out(struct gpio_chip *gc, unsigned offset,
+				int value)
+{
+	int ret;
+	ret = bcm2708_set_function(gc, offset, GPIO_FSEL_OUTPUT);
+	if (ret >= 0)
+		bcm2708_gpio_set(gc, offset, value);
+	return ret;
+}
+
+static int bcm2708_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc);
+	unsigned gpio_bank = offset / 32;
+	unsigned gpio_field_offset = (offset - 32 * gpio_bank);
+	unsigned lev;
+
+	if (offset >= BCM2708_NR_GPIOS)
+		return 0;
+	lev = readl(gpio->base + GPIOLEV(gpio_bank));
+//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_get %p (%d)=%d\n", gc, offset, 0x1 & (lev>>gpio_field_offset));
+	return 0x1 & (lev >> gpio_field_offset);
+}
+
+static void bcm2708_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc);
+	unsigned gpio_bank = offset / 32;
+	unsigned gpio_field_offset = (offset - 32 * gpio_bank);
+//printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_set %p (%d=%d)\n", gc, offset, value);
+	if (offset >= BCM2708_NR_GPIOS)
+		return;
+	if (value)
+		writel(1 << gpio_field_offset, gpio->base + GPIOSET(gpio_bank));
+	else
+		writel(1 << gpio_field_offset, gpio->base + GPIOCLR(gpio_bank));
+}
+
+/**********************
+ * extension to configure pullups
+ */
+int bcm2708_gpio_setpull(struct gpio_chip *gc, unsigned offset,
+		bcm2708_gpio_pull_t value)
+{
+	struct bcm2708_gpio *gpio = container_of(gc, struct bcm2708_gpio, gc);
+	unsigned gpio_bank = offset / 32;
+	unsigned gpio_field_offset = (offset - 32 * gpio_bank);
+
+	if (offset >= BCM2708_NR_GPIOS)
+		return -EINVAL;
+
+	switch (value) {
+	case BCM2708_PULL_UP:
+		writel(2, gpio->base + GPIOUD(0));
+		break;
+	case BCM2708_PULL_DOWN:
+		writel(1, gpio->base + GPIOUD(0));
+		break;
+	case BCM2708_PULL_OFF:
+		writel(0, gpio->base + GPIOUD(0));
+		break;
+	}
+
+	udelay(5);
+	writel(1 << gpio_field_offset, gpio->base + GPIOUDCLK(gpio_bank));
+	udelay(5);
+	writel(0, gpio->base + GPIOUD(0));
+	writel(0 << gpio_field_offset, gpio->base + GPIOUDCLK(gpio_bank));
+
+	return 0;
+}
+EXPORT_SYMBOL(bcm2708_gpio_setpull);
+
+/*************************************************************************************************************************
+ * bcm2708 GPIO IRQ
+ */
+
+#if BCM_GPIO_USE_IRQ
+
+static int bcm2708_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+	return gpio_to_irq(gpio);
+}
+
+static int bcm2708_gpio_irq_set_type(struct irq_data *d, unsigned type)
+{
+	unsigned irq = d->irq;
+	struct bcm2708_gpio *gpio = irq_get_chip_data(irq);
+	unsigned gn = irq_to_gpio(irq);
+	unsigned gb = gn / 32;
+	unsigned go = gn % 32;
+
+	gpio->rising[gb]  &= ~(1 << go);
+	gpio->falling[gb] &= ~(1 << go);
+	gpio->high[gb]    &= ~(1 << go);
+	gpio->low[gb]     &= ~(1 << go);
+
+	if (type & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+		return -EINVAL;
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		gpio->rising[gb] |= (1 << go);
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		gpio->falling[gb] |= (1 << go);
+	if (type & IRQ_TYPE_LEVEL_HIGH)
+		gpio->high[gb] |= (1 << go);
+	if (type & IRQ_TYPE_LEVEL_LOW)
+		gpio->low[gb] |= (1 << go);
+	return 0;
+}
+
+static void bcm2708_gpio_irq_mask(struct irq_data *d)
+{
+	unsigned irq = d->irq;
+	struct bcm2708_gpio *gpio = irq_get_chip_data(irq);
+	unsigned gn = irq_to_gpio(irq);
+	unsigned gb = gn / 32;
+	unsigned long rising  = readl(gpio->base + GPIOREN(gb));
+	unsigned long falling = readl(gpio->base + GPIOFEN(gb));
+	unsigned long high    = readl(gpio->base + GPIOHEN(gb));
+	unsigned long low     = readl(gpio->base + GPIOLEN(gb));
+
+	gn = gn % 32;
+
+	writel(rising  & ~(1 << gn), gpio->base + GPIOREN(gb));
+	writel(falling & ~(1 << gn), gpio->base + GPIOFEN(gb));
+	writel(high    & ~(1 << gn), gpio->base + GPIOHEN(gb));
+	writel(low     & ~(1 << gn), gpio->base + GPIOLEN(gb));
+}
+
+static void bcm2708_gpio_irq_unmask(struct irq_data *d)
+{
+	unsigned irq = d->irq;
+	struct bcm2708_gpio *gpio = irq_get_chip_data(irq);
+	unsigned gn = irq_to_gpio(irq);
+	unsigned gb = gn / 32;
+	unsigned go = gn % 32;
+	unsigned long rising  = readl(gpio->base + GPIOREN(gb));
+	unsigned long falling = readl(gpio->base + GPIOFEN(gb));
+	unsigned long high    = readl(gpio->base + GPIOHEN(gb));
+	unsigned long low     = readl(gpio->base + GPIOLEN(gb));
+
+	if (gpio->rising[gb] & (1 << go)) {
+		writel(rising |  (1 << go), gpio->base + GPIOREN(gb));
+	} else {
+		writel(rising & ~(1 << go), gpio->base + GPIOREN(gb));
+	}
+
+	if (gpio->falling[gb] & (1 << go)) {
+		writel(falling |  (1 << go), gpio->base + GPIOFEN(gb));
+	} else {
+		writel(falling & ~(1 << go), gpio->base + GPIOFEN(gb));
+	}
+
+	if (gpio->high[gb] & (1 << go)) {
+		writel(high |  (1 << go), gpio->base + GPIOHEN(gb));
+	} else {
+		writel(high & ~(1 << go), gpio->base + GPIOHEN(gb));
+	}
+
+	if (gpio->low[gb] & (1 << go)) {
+		writel(low |  (1 << go), gpio->base + GPIOLEN(gb));
+	} else {
+		writel(low & ~(1 << go), gpio->base + GPIOLEN(gb));
+	}
+}
+
+static struct irq_chip bcm2708_irqchip = {
+	.name = "GPIO",
+	.irq_enable = bcm2708_gpio_irq_unmask,
+	.irq_disable = bcm2708_gpio_irq_mask,
+	.irq_unmask = bcm2708_gpio_irq_unmask,
+	.irq_mask = bcm2708_gpio_irq_mask,
+	.irq_set_type = bcm2708_gpio_irq_set_type,
+};
+
+static irqreturn_t bcm2708_gpio_interrupt(int irq, void *dev_id)
+{
+	unsigned long edsr;
+	unsigned bank;
+	int i;
+	unsigned gpio;
+	unsigned level_bits;
+	struct bcm2708_gpio *gpio_data = dev_id;
+
+	for (bank = 0; bank < GPIO_BANKS; bank++) {
+		edsr = readl(__io_address(GPIO_BASE) + GPIOEDS(bank));
+		level_bits = gpio_data->high[bank] | gpio_data->low[bank];
+
+		for_each_set_bit(i, &edsr, 32) {
+			gpio = i + bank * 32;
+			/* ack edge triggered IRQs immediately */
+			if (!(level_bits & (1<<i)))
+				writel(1<<i,
+				       __io_address(GPIO_BASE) + GPIOEDS(bank));
+			generic_handle_irq(gpio_to_irq(gpio));
+			/* ack level triggered IRQ after handling them */
+			if (level_bits & (1<<i))
+				writel(1<<i,
+				       __io_address(GPIO_BASE) + GPIOEDS(bank));
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+static struct irqaction bcm2708_gpio_irq = {
+	.name = "BCM2708 GPIO catchall handler",
+	.flags = IRQF_TIMER | IRQF_IRQPOLL,
+	.handler = bcm2708_gpio_interrupt,
+};
+
+static void bcm2708_gpio_irq_init(struct bcm2708_gpio *ucb)
+{
+	unsigned irq;
+
+	ucb->gc.to_irq = bcm2708_gpio_to_irq;
+
+	for (irq = GPIO_IRQ_START; irq < (GPIO_IRQ_START + GPIO_IRQS); irq++) {
+		irq_set_chip_data(irq, ucb);
+		irq_set_chip_and_handler(irq, &bcm2708_irqchip,
+					 handle_simple_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	bcm2708_gpio_irq.dev_id = ucb;
+	setup_irq(IRQ_GPIO3, &bcm2708_gpio_irq);
+}
+
+#else
+
+static void bcm2708_gpio_irq_init(struct bcm2708_gpio *ucb)
+{
+}
+
+#endif /* #if BCM_GPIO_USE_IRQ ***************************************************************************************************************** */
+
+static int bcm2708_gpio_probe(struct platform_device *dev)
+{
+	struct bcm2708_gpio *ucb;
+	struct resource *res;
+	int bank;
+	int err = 0;
+
+	printk(KERN_INFO DRIVER_NAME ": bcm2708_gpio_probe %p\n", dev);
+
+	ucb = kzalloc(sizeof(*ucb), GFP_KERNEL);
+	if (NULL == ucb) {
+		printk(KERN_ERR DRIVER_NAME ": failed to allocate "
+		       "mailbox memory\n");
+		err = -ENOMEM;
+		goto err;
+	}
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+
+	platform_set_drvdata(dev, ucb);
+	ucb->base = __io_address(GPIO_BASE);
+
+	ucb->gc.label = "bcm2708_gpio";
+	ucb->gc.base = 0;
+	ucb->gc.ngpio = BCM2708_NR_GPIOS;
+	ucb->gc.owner = THIS_MODULE;
+
+	ucb->gc.direction_input = bcm2708_gpio_dir_in;
+	ucb->gc.direction_output = bcm2708_gpio_dir_out;
+	ucb->gc.get = bcm2708_gpio_get;
+	ucb->gc.set = bcm2708_gpio_set;
+	ucb->gc.can_sleep = 0;
+
+	for (bank = 0; bank < GPIO_BANKS; bank++) {
+		writel(0, ucb->base + GPIOREN(bank));
+		writel(0, ucb->base + GPIOFEN(bank));
+		writel(0, ucb->base + GPIOHEN(bank));
+		writel(0, ucb->base + GPIOLEN(bank));
+		writel(0, ucb->base + GPIOAREN(bank));
+		writel(0, ucb->base + GPIOAFEN(bank));
+		writel(~0, ucb->base + GPIOEDS(bank));
+	}
+
+	bcm2708_gpio_irq_init(ucb);
+
+	err = gpiochip_add(&ucb->gc);
+
+err:
+	return err;
+
+}
+
+static int bcm2708_gpio_remove(struct platform_device *dev)
+{
+	int err = 0;
+	struct bcm2708_gpio *ucb = platform_get_drvdata(dev);
+
+	printk(KERN_ERR DRIVER_NAME ": bcm2708_gpio_remove %p\n", dev);
+
+	gpiochip_remove(&ucb->gc);
+
+	platform_set_drvdata(dev, NULL);
+	kfree(ucb);
+
+	return err;
+}
+
+static struct platform_driver bcm2708_gpio_driver = {
+	.probe = bcm2708_gpio_probe,
+	.remove = bcm2708_gpio_remove,
+	.driver = {
+		   .name = "bcm2708_gpio"},
+};
+
+static int __init bcm2708_gpio_init(void)
+{
+	return platform_driver_register(&bcm2708_gpio_driver);
+}
+
+static void __exit bcm2708_gpio_exit(void)
+{
+	platform_driver_unregister(&bcm2708_gpio_driver);
+}
+
+module_init(bcm2708_gpio_init);
+module_exit(bcm2708_gpio_exit);
+
+MODULE_DESCRIPTION("Broadcom BCM2708 GPIO driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/arch/arm/mach-bcm2708/include/mach/gpio.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-bcm2708/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#define BCM2708_NR_GPIOS 54 // number of gpio lines
+
+#define gpio_to_irq(x)	((x) + GPIO_IRQ_START)
+#define irq_to_gpio(x)	((x) - GPIO_IRQ_START)
+
+#endif
--- a/arch/arm/mach-bcm2709/bcm2709.c
+++ b/arch/arm/mach-bcm2709/bcm2709.c
@@ -329,6 +329,31 @@ static struct platform_device bcm2708_vc
 		},
 };
 
+#ifdef CONFIG_BCM2708_GPIO
+#define BCM_GPIO_DRIVER_NAME "bcm2708_gpio"
+
+static struct resource bcm2708_gpio_resources[] = {
+	[0] = {			/* general purpose I/O */
+	       .start = GPIO_BASE,
+	       .end = GPIO_BASE + SZ_4K - 1,
+	       .flags = IORESOURCE_MEM,
+	       },
+};
+
+static u64 gpio_dmamask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON);
+
+static struct platform_device bcm2708_gpio_device = {
+	.name = BCM_GPIO_DRIVER_NAME,
+	.id = -1,		/* only one VideoCore I/O area */
+	.resource = bcm2708_gpio_resources,
+	.num_resources = ARRAY_SIZE(bcm2708_gpio_resources),
+	.dev = {
+		.dma_mask = &gpio_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(DMA_MASK_BITS_COMMON),
+		},
+};
+#endif
+
 int __init bcm_register_device(struct platform_device *pdev)
 {
 	int ret;
--- /dev/null
+++ b/include/linux/platform_data/bcm2708.h
@@ -0,0 +1,23 @@
+/*
+ * include/linux/platform_data/bcm2708.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (C) 2014 Julian Scheel <julian@jusst.de>
+ *
+ */
+#ifndef __BCM2708_H_
+#define __BCM2708_H_
+
+typedef enum {
+	BCM2708_PULL_OFF,
+	BCM2708_PULL_UP,
+	BCM2708_PULL_DOWN
+} bcm2708_gpio_pull_t;
+
+extern int bcm2708_gpio_setpull(struct gpio_chip *gc, unsigned offset,
+		bcm2708_gpio_pull_t value);
+
+#endif