KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/at91/image/Makefile

78 lines
1.6 KiB
Makefile
Raw Normal View History

at91: remove SAMA5D3 from Default image build. As the Default profile option is a legacy subtarget, the dtb for the sama5d3_xplained board DTS is not built and image generation fails. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> SVN-Revision: 48351
2016-01-19 10:15:20 +00:00
#
at91: upgrade to kernel 3.8.7 and use devicetree This upgrades the AT91 target to 3.8.7, and migrates to device tree. This allows a single kernel to be built for most at91 variants which simplifies things quite a bit. The immediate result is that all subtargets are nuked, and any boards without dts files are no longer supported, though the target now includes more boards than before. The adc driver was also nuked as 3.8.7 includes a new one under the IIO subsystem. Signed-off-by: Adam Porter <porter.adam@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36452
2013-04-26 16:55:40 +00:00
# Copyright (C) 2006-2013 OpenWrt.org
Added initial support for at91 plaform (HCG) SVN-Revision: 6508
2007-03-04 17:29:44 +00:00
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
at91: convert boards to generic build target Evaluation boards are left in component form to ease flashing using vendor tooling and instructions. These boards also do not include the EOF marker in the UBIFS as the bootloaders are recent and easily upgradeable. The end product boards use factory.bin images based on the dts layout and include EOF markers as bootloader UBI support is not determined. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-05-03 21:15:20 +00:00
KERNEL_LOADADDR := 0x20008000
at91: AT91SAM9G20-EK fixes From 272f548fe8d0b811e0589e535f650f0507f6bccd Mon Sep 17 00:00:00 2001 From: Owen Kirby <osk@exegin.com> Date: Fri, 11 Apr 2014 17:59:55 -0700 Subject: [PATCH 2/3] [at91] AT91SAM9G20-EK fixes. While testing the 3.10 kernel update, I found that the out-of-the-box device tree for the the AT91SAM9G20EK uses a UBIFS rootfs and stores the DTB separately from the zImage. Signed-off-by: Owen Kirby <osk@exegin.com> SVN-Revision: 40597
2014-04-29 21:02:05 +00:00
at91: fix image building with CONFIG_TARGET_MULTI_PROFILE The current image build code has a number of race conditions and interface contract violations in the custom image build steps: - Build/install-zImage, solely used by at91, relies on $(PROFILE_SANITIZED) which is not available when building with CONFIG_TARGET_MULTI_PROFILE - Build/at91-sdcard, which may run concurrently, creates scratch files at fixed locations and manipulates target files directly which can lead to file corruption and other unexpected failures Rename the install-zImage macro to at91-install-zImage and move it to the at91 image Makefile since this target is the sole user. Also utilize "$@" as output file name and switch the usage of $(PROFILE_SANITIZED) to $(DEVICE_NAME) in order to fix naming under multi profile builds. Fix the at91-sdcard macro to construct scratch file paths relative to "$@", which is guaranteed to be unique and store the final artifact output in "$@" as well, instead of inside $(BIN_DIR). The generic image build code takes care of moving a build steps "$@" output to the final destination in a concurrency-safe manner. Finally remove the broken install-zImage from the generic image-commands Makefile. Fixes: d7a679a036 ("at91: Install zImage.") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-02-13 15:12:08 +00:00
define Build/at91-install-zImage
$(CP) $(KDIR)/zImage $@
endef
at91: convert boards to generic build target Evaluation boards are left in component form to ease flashing using vendor tooling and instructions. These boards also do not include the EOF marker in the UBIFS as the bootloaders are recent and easily upgradeable. The end product boards use factory.bin images based on the dts layout and include EOF markers as bootloader UBI support is not determined. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-05-03 21:15:20 +00:00
ifeq ($(SUBTARGET),legacy)
include ./legacy.mk
endif
at91: Renaming subtarget sama5d3 to sama5 Renaming at91 subtarget sama5d3 to sama5 and using at91-sama5d3_xplained as a target device in sama5 subtarget.This will enable to add other sama5d2 & sama5d4 target devices in sama5 subtraget.This will avoid code duplication when sama5d2 & sama5d4 added as different subtarget. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-13 18:51:13 +00:00
ifeq ($(SUBTARGET),sama5)
include ./sama5.mk
at91: convert boards to generic build target Evaluation boards are left in component form to ease flashing using vendor tooling and instructions. These boards also do not include the EOF marker in the UBIFS as the bootloaders are recent and easily upgradeable. The end product boards use factory.bin images based on the dts layout and include EOF markers as bootloader UBI support is not determined. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-05-03 21:15:20 +00:00
endif
at91: add SAMA5D3-Xplained board UBI parameters to makefile. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> SVN-Revision: 44604
2015-03-05 20:24:57 +00:00
at91: convert boards to generic build target Evaluation boards are left in component form to ease flashing using vendor tooling and instructions. These boards also do not include the EOF marker in the UBIFS as the bootloaders are recent and easily upgradeable. The end product boards use factory.bin images based on the dts layout and include EOF markers as bootloader UBI support is not determined. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-05-03 21:15:20 +00:00
define Device/Default
at91: separate MKUBIFS opts to defaults in the sub target Instead of applying global defaults based on selected board, transition to using a per board setting for UBIFS and UBINIZE. Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
2017-06-01 22:04:52 +00:00
$(Device/default-nand)
at91: convert boards to generic build target Evaluation boards are left in component form to ease flashing using vendor tooling and instructions. These boards also do not include the EOF marker in the UBIFS as the bootloaders are recent and easily upgradeable. The end product boards use factory.bin images based on the dts layout and include EOF markers as bootloader UBI support is not determined. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-05-03 21:15:20 +00:00
PROFILES := Default
FILESYSTEMS := squashfs ubifs
DEVICE_DTS := $(1)
KERNEL_NAME := zImage
KERNEL_SIZE := 4096k
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma
at91: fix legacy build The build system took the DTB_SIZE definition from Default and not from production-dtb under some conditions. Move the size definitions to Default now as it is only used in production-dtb anyway. Thanks Mathias Kresin for helping me with this. Fixes: c2f052acaeb ("at91: convert boards to generic build target") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-16 19:36:17 +00:00
DTB_SIZE := 128k
at91: upgrade to kernel 3.8.7 and use devicetree This upgrades the AT91 target to 3.8.7, and migrates to device tree. This allows a single kernel to be built for most at91 variants which simplifies things quite a bit. The immediate result is that all subtargets are nuked, and any boards without dts files are no longer supported, though the target now includes more boards than before. The adc driver was also nuked as 3.8.7 includes a new one under the IIO subsystem. Signed-off-by: Adam Porter <porter.adam@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36452
2013-04-26 16:55:40 +00:00
endef
at91: convert boards to generic build target Evaluation boards are left in component form to ease flashing using vendor tooling and instructions. These boards also do not include the EOF marker in the UBIFS as the bootloaders are recent and easily upgradeable. The end product boards use factory.bin images based on the dts layout and include EOF markers as bootloader UBI support is not determined. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-05-03 21:15:20 +00:00
define Device/dtb
KERNEL := kernel-bin | lzma | uImage lzma
at91: upgrade to kernel 3.8.7 and use devicetree This upgrades the AT91 target to 3.8.7, and migrates to device tree. This allows a single kernel to be built for most at91 variants which simplifies things quite a bit. The immediate result is that all subtargets are nuked, and any boards without dts files are no longer supported, though the target now includes more boards than before. The adc driver was also nuked as 3.8.7 includes a new one under the IIO subsystem. Signed-off-by: Adam Porter <porter.adam@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36452
2013-04-26 16:55:40 +00:00
endef
at91: convert boards to generic build target Evaluation boards are left in component form to ease flashing using vendor tooling and instructions. These boards also do not include the EOF marker in the UBIFS as the bootloaders are recent and easily upgradeable. The end product boards use factory.bin images based on the dts layout and include EOF markers as bootloader UBI support is not determined. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-05-03 21:15:20 +00:00
define Device/evaluation
KERNEL_INSTALL := 1
KERNEL_SUFFIX := -uImage
IMAGES := root.ubi
IMAGE/root.ubi := append-ubi
at91: AT91SAM9G20-EK fixes From 272f548fe8d0b811e0589e535f650f0507f6bccd Mon Sep 17 00:00:00 2001 From: Owen Kirby <osk@exegin.com> Date: Fri, 11 Apr 2014 17:59:55 -0700 Subject: [PATCH 2/3] [at91] AT91SAM9G20-EK fixes. While testing the 3.10 kernel update, I found that the out-of-the-box device tree for the the AT91SAM9G20EK uses a UBIFS rootfs and stores the DTB separately from the zImage. Signed-off-by: Owen Kirby <osk@exegin.com> SVN-Revision: 40597
2014-04-29 21:02:05 +00:00
endef
at91: Install zImage. Installing zImage to bin folder of device target. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-13 18:51:15 +00:00
define Device/evaluation-zImage
IMAGES += zImage
at91: fix image building with CONFIG_TARGET_MULTI_PROFILE The current image build code has a number of race conditions and interface contract violations in the custom image build steps: - Build/install-zImage, solely used by at91, relies on $(PROFILE_SANITIZED) which is not available when building with CONFIG_TARGET_MULTI_PROFILE - Build/at91-sdcard, which may run concurrently, creates scratch files at fixed locations and manipulates target files directly which can lead to file corruption and other unexpected failures Rename the install-zImage macro to at91-install-zImage and move it to the at91 image Makefile since this target is the sole user. Also utilize "$@" as output file name and switch the usage of $(PROFILE_SANITIZED) to $(DEVICE_NAME) in order to fix naming under multi profile builds. Fix the at91-sdcard macro to construct scratch file paths relative to "$@", which is guaranteed to be unique and store the final artifact output in "$@" as well, instead of inside $(BIN_DIR). The generic image build code takes care of moving a build steps "$@" output to the final destination in a concurrency-safe manner. Finally remove the broken install-zImage from the generic image-commands Makefile. Fixes: d7a679a036 ("at91: Install zImage.") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-02-13 15:12:08 +00:00
IMAGE/zImage := at91-install-zImage
at91: Install zImage. Installing zImage to bin folder of device target. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-13 18:51:15 +00:00
endef
at91: convert boards to generic build target Evaluation boards are left in component form to ease flashing using vendor tooling and instructions. These boards also do not include the EOF marker in the UBIFS as the bootloaders are recent and easily upgradeable. The end product boards use factory.bin images based on the dts layout and include EOF markers as bootloader UBI support is not determined. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-05-03 21:15:20 +00:00
define Device/evaluation-dtb
$(Device/evaluation)
$(Device/dtb)
at91: Install zImage. Installing zImage to bin folder of device target. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
2017-09-13 18:51:15 +00:00
$(Device/evaluation-zImage)
at91: convert boards to generic build target Evaluation boards are left in component form to ease flashing using vendor tooling and instructions. These boards also do not include the EOF marker in the UBIFS as the bootloaders are recent and easily upgradeable. The end product boards use factory.bin images based on the dts layout and include EOF markers as bootloader UBI support is not determined. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-05-03 21:15:20 +00:00
IMAGES += dtb
IMAGE/dtb := install-dtb
Added initial support for at91 plaform (HCG) SVN-Revision: 6508
2007-03-04 17:29:44 +00:00
endef
at91: add support for the WB45N module from Laird This module from Laird includes the following: - CPU Atmel SoC ARM926EJS - Wifi AR6003 - Bluetooth CSR8510 - RAM 64MB LPDDR - FLASH 128MB The flash is a dual image layout, kernel a/b, rootfs a/b, and a user partition. Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
2016-06-10 19:07:32 +00:00
define Device/evaluation-fit
$(Device/evaluation)
KERNEL_SUFFIX := -fit-uImage.itb
KERNEL := kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
endef
at91: convert boards to generic build target Evaluation boards are left in component form to ease flashing using vendor tooling and instructions. These boards also do not include the EOF marker in the UBIFS as the bootloaders are recent and easily upgradeable. The end product boards use factory.bin images based on the dts layout and include EOF markers as bootloader UBI support is not determined. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-05-03 21:15:20 +00:00
define Device/production
UBINIZE_OPTS := -E 5
IMAGES := factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
Added initial support for at91 plaform (HCG) SVN-Revision: 6508
2007-03-04 17:29:44 +00:00
endef
at91: convert boards to generic build target Evaluation boards are left in component form to ease flashing using vendor tooling and instructions. These boards also do not include the EOF marker in the UBIFS as the bootloaders are recent and easily upgradeable. The end product boards use factory.bin images based on the dts layout and include EOF markers as bootloader UBI support is not determined. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-05-03 21:15:20 +00:00
define Device/production-dtb
$(Device/production)
$(Device/dtb)
IMAGE/factory.bin := append-dtb | pad-to $$$$(DTB_SIZE) \
| append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
Added initial support for at91 plaform (HCG) SVN-Revision: 6508
2007-03-04 17:29:44 +00:00
endef
$(eval $(call BuildImage))
Reference in a new issue Copy permalink