openwrtv3/target/linux/ramips/dts/TEW-692GR.dts

152 lines
2.5 KiB
Text
Raw Normal View History

/dts-v1/;
#include "rt3883.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "TEW-692GR", "ralink,rt3883-soc";
model = "TRENDnet TEW-692GR";
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x0030000>;
label = "u-boot";
read-only;
};
partition@30000 {
reg = <0x00030000 0x00010000>;
label = "u-boot-env";
read-only;
};
factory: partition@40000 {
reg = <0x00040000 0x00010000>;
label = "factory";
read-only;
};
partition@50000 {
reg = <0x00050000 0x007b0000>;
label = "firmware";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio1 2 1>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
wps {
label = "tew-692gr:orange:wps";
gpios = <&gpio0 9 1>;
};
wps2 {
label = "tew-692gr:green:wps";
gpios = <&gpio1 4 1>;
};
};
};
&gpio1 {
status = "okay";
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "spi", "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
status = "okay";
mtd-mac-address = <&factory 0x4>;
port@0 {
phy-handle = <&phy0>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
qca,ar8327-initvals = <
0x04 0x07600000 /* PORT0 PAD MODE CTRL */
0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
0x50 0xc437c437 /* LED Control Register 0 */
0x54 0xc337c337 /* LED Control Register 1 */
0x58 0x00000000 /* LED Control Register 2 */
0x5c 0x03ffff00 /* LED Control Register 3 */
0x7c 0x0000007e /* PORT0_STATUS */
0x94 0x0000007e /* PORT6 STATUS */
>;
};
};
};
&pci {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pci_pins>;
pci_pins: pci {
pci {
ralink,group = "pci";
ralink,function = "pci-fnc";
};
};
host-bridge {
pci-bridge@1 {
status = "okay";
wifi@0,0 {
compatible = "pci0,0";
reg = < 0x10000 0 0 0 0 >;
ralink,2ghz = <0>;
};
};
};
};
&wmac {
status = "okay";
ralink,mtd-eeprom = <&factory 0x0>;
ralink,5ghz = <0>;
mtd-mac-address = <&factory 0x4>;
mtd-mac-address-increment = <3>;
};