openwrtv3/target/linux/brcm2708/patches-4.4/0496-Fixes-i2c_bcm2708-Write-to-FIFO-correctly-v2-1574.patch

49 lines
1.8 KiB
Diff
Raw Normal View History

From 1b6ee2ac8f1d55cb7ceeaa606e3d4868cfde363d Mon Sep 17 00:00:00 2001
From: Simon Maes <simonn.maes@gmail.com>
Date: Mon, 29 Aug 2016 21:11:01 +0200
Subject: [PATCH] Fixes i2c_bcm2708: Write to FIFO correctly - v2 (#1574)
* i2c: fix i2c_bcm2708: Clear FIFO before sending data
Make sure FIFO gets cleared before trying to send
data in case of a repeated start (COMBINED=Y).
* i2c: fix i2c_bcm2708: Only write to FIFO when not full
Check if FIFO can accept data before writing.
To avoid a peripheral read on the last iteration of a loop,
both bcm2708_bsc_fifo_fill and ~drain are changed as well.
---
drivers/i2c/busses/i2c-bcm2708.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/i2c/busses/i2c-bcm2708.c
+++ b/drivers/i2c/busses/i2c-bcm2708.c
@@ -115,13 +115,13 @@ static inline void bcm2708_bsc_reset(str
static inline void bcm2708_bsc_fifo_drain(struct bcm2708_i2c *bi)
{
- while ((bcm2708_rd(bi, BSC_S) & BSC_S_RXD) && (bi->pos < bi->msg->len))
+ while ((bi->pos < bi->msg->len) && (bcm2708_rd(bi, BSC_S) & BSC_S_RXD))
bi->msg->buf[bi->pos++] = bcm2708_rd(bi, BSC_FIFO);
}
static inline void bcm2708_bsc_fifo_fill(struct bcm2708_i2c *bi)
{
- while ((bcm2708_rd(bi, BSC_S) & BSC_S_TXD) && (bi->pos < bi->msg->len))
+ while ((bi->pos < bi->msg->len) && (bcm2708_rd(bi, BSC_S) & BSC_S_TXD))
bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]);
}
@@ -155,6 +155,10 @@ static inline int bcm2708_bsc_setup(stru
if ( (bi->nmsgs > 1) &&
!(bi->msg[0].flags & I2C_M_RD) && (bi->msg[1].flags & I2C_M_RD) &&
(bi->msg[0].addr == bi->msg[1].addr) && (bi->msg[0].len <= 16)) {
+
+ /* Clear FIFO */
+ bcm2708_wr(bi, BSC_C, BSC_C_CLEAR_1);
+
/* Fill FIFO with entire write message (16 byte FIFO) */
while (bi->pos < bi->msg->len) {
bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]);