openwrtv3/target/linux/cns3xxx/files/drivers/usb/dwc/otg_cil.c

3832 lines
115 KiB
C
Raw Normal View History

/* ==========================================================================
* $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $
* $Revision: #147 $
* $Date: 2008/10/16 $
* $Change: 1117667 $
*
* Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
* "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
* otherwise expressly agreed to in writing between Synopsys and you.
*
* The Software IS NOT an item of Licensed Software or Licensed Product under
* any End User Software License Agreement or Agreement for Licensed Product
* with Synopsys or any supplement thereto. You are permitted to use and
* redistribute this Software in source and binary forms, with or without
* modification, provided that redistributions of source code must retain this
* notice. You may not view, use, disclose, copy or distribute this file or
* any information contained herein except pursuant to this license grant from
* Synopsys. If you do not agree with this notice, including the disclaimer
* below, then you are not authorized to use the Software.
*
* THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
* ========================================================================== */
/** @file
*
* The Core Interface Layer provides basic services for accessing and
* managing the DWC_otg hardware. These services are used by both the
* Host Controller Driver and the Peripheral Controller Driver.
*
* The CIL manages the memory map for the core so that the HCD and PCD
* don't have to do this separately. It also handles basic tasks like
* reading/writing the registers and data FIFOs in the controller.
* Some of the data access functions provide encapsulation of several
* operations required to perform a task, such as writing multiple
* registers to start a transfer. Finally, the CIL performs basic
* services that are not specific to either the host or device modes
* of operation. These services include management of the OTG Host
* Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
* Diagnostic API is also provided to allow testing of the controller
* hardware.
*
* The Core Interface Layer has the following requirements:
* - Provides basic controller operations.
* - Minimal use of OS services.
* - The OS services used will be abstracted by using inline functions
* or macros.
*
*/
#include <asm/unaligned.h>
#include <linux/dma-mapping.h>
#ifdef DEBUG
#include <linux/jiffies.h>
#endif
#include "otg_plat.h"
#include "otg_regs.h"
#include "otg_cil.h"
#include "otg_pcd.h"
/**
* This function is called to initialize the DWC_otg CSR data
* structures. The register addresses in the device and host
* structures are initialized from the base address supplied by the
* caller. The calling function must make the OS calls to get the
* base address of the DWC_otg controller registers. The core_params
* argument holds the parameters that specify how the core should be
* configured.
*
* @param[in] reg_base_addr Base address of DWC_otg core registers
* @param[in] core_params Pointer to the core configuration parameters
*
*/
dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *reg_base_addr,
dwc_otg_core_params_t *core_params)
{
dwc_otg_core_if_t *core_if = 0;
dwc_otg_dev_if_t *dev_if = 0;
dwc_otg_host_if_t *host_if = 0;
uint8_t *reg_base = (uint8_t *)reg_base_addr;
int i = 0;
DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, reg_base_addr, core_params);
core_if = kmalloc(sizeof(dwc_otg_core_if_t), GFP_KERNEL);
if (core_if == 0) {
DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_core_if_t failed\n");
return 0;
}
memset(core_if, 0, sizeof(dwc_otg_core_if_t));
core_if->core_params = core_params;
core_if->core_global_regs = (dwc_otg_core_global_regs_t *)reg_base;
/*
* Allocate the Device Mode structures.
*/
dev_if = kmalloc(sizeof(dwc_otg_dev_if_t), GFP_KERNEL);
if (dev_if == 0) {
DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
kfree(core_if);
return 0;
}
dev_if->dev_global_regs =
(dwc_otg_device_global_regs_t *)(reg_base + DWC_DEV_GLOBAL_REG_OFFSET);
for (i=0; i<MAX_EPS_CHANNELS; i++)
{
dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
(reg_base + DWC_DEV_IN_EP_REG_OFFSET +
(i * DWC_EP_REG_OFFSET));
dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *)
(reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
(i * DWC_EP_REG_OFFSET));
DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n",
i, &dev_if->in_ep_regs[i]->diepctl);
DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n",
i, &dev_if->out_ep_regs[i]->doepctl);
}
dev_if->speed = 0; // unknown
core_if->dev_if = dev_if;
/*
* Allocate the Host Mode structures.
*/
host_if = kmalloc(sizeof(dwc_otg_host_if_t), GFP_KERNEL);
if (host_if == 0) {
DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_host_if_t failed\n");
kfree(dev_if);
kfree(core_if);
return 0;
}
host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
(reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);
host_if->hprt0 = (uint32_t*)(reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);
for (i=0; i<MAX_EPS_CHANNELS; i++)
{
host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
(reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET +
(i * DWC_OTG_CHAN_REGS_OFFSET));
DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
i, &host_if->hc_regs[i]->hcchar);
}
host_if->num_host_channels = MAX_EPS_CHANNELS;
core_if->host_if = host_if;
for (i=0; i<MAX_EPS_CHANNELS; i++)
{
core_if->data_fifo[i] =
(uint32_t *)(reg_base + DWC_OTG_DATA_FIFO_OFFSET +
(i * DWC_OTG_DATA_FIFO_SIZE));
DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n",
i, (unsigned)core_if->data_fifo[i]);
}
core_if->pcgcctl = (uint32_t*)(reg_base + DWC_OTG_PCGCCTL_OFFSET);
/*
* Store the contents of the hardware configuration registers here for
* easy access later.
*/
core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1);
core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2);
core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3);
core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4);
DWC_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",core_if->hwcfg1.d32);
DWC_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",core_if->hwcfg2.d32);
DWC_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",core_if->hwcfg3.d32);
DWC_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",core_if->hwcfg4.d32);
core_if->hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
core_if->dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
DWC_DEBUGPL(DBG_CILV,"hcfg=%08x\n",core_if->hcfg.d32);
DWC_DEBUGPL(DBG_CILV,"dcfg=%08x\n",core_if->dcfg.d32);
DWC_DEBUGPL(DBG_CILV,"op_mode=%0x\n",core_if->hwcfg2.b.op_mode);
DWC_DEBUGPL(DBG_CILV,"arch=%0x\n",core_if->hwcfg2.b.architecture);
DWC_DEBUGPL(DBG_CILV,"num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep);
DWC_DEBUGPL(DBG_CILV,"num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan);
DWC_DEBUGPL(DBG_CILV,"nonperio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.nonperio_tx_q_depth);
DWC_DEBUGPL(DBG_CILV,"host_perio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.host_perio_tx_q_depth);
DWC_DEBUGPL(DBG_CILV,"dev_token_q_depth=0x%0x\n",core_if->hwcfg2.b.dev_token_q_depth);
DWC_DEBUGPL(DBG_CILV,"Total FIFO SZ=%d\n", core_if->hwcfg3.b.dfifo_depth);
DWC_DEBUGPL(DBG_CILV,"xfer_size_cntr_width=%0x\n", core_if->hwcfg3.b.xfer_size_cntr_width);
/*
* Set the SRP sucess bit for FS-I2c
*/
core_if->srp_success = 0;
core_if->srp_timer_started = 0;
/*
* Create new workqueue and init works
*/
core_if->wq_otg = create_singlethread_workqueue("dwc_otg");
if(core_if->wq_otg == 0) {
DWC_DEBUGPL(DBG_CIL, "Creation of wq_otg failed\n");
kfree(host_if);
kfree(dev_if);
kfree(core_if);
return 0 * HZ;
}
INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change);
INIT_DELAYED_WORK(&core_if->w_wkp, w_wakeup_detected);
return core_if;
}
/**
* This function frees the structures allocated by dwc_otg_cil_init().
*
* @param[in] core_if The core interface pointer returned from
* dwc_otg_cil_init().
*
*/
void dwc_otg_cil_remove(dwc_otg_core_if_t *core_if)
{
/* Disable all interrupts */
dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 1, 0);
dwc_write_reg32(&core_if->core_global_regs->gintmsk, 0);
if (core_if->wq_otg) {
destroy_workqueue(core_if->wq_otg);
}
if (core_if->dev_if) {
kfree(core_if->dev_if);
}
if (core_if->host_if) {
kfree(core_if->host_if);
}
kfree(core_if);
}
/**
* This function enables the controller's Global Interrupt in the AHB Config
* register.
*
* @param[in] core_if Programming view of DWC_otg controller.
*/
void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t *core_if)
{
gahbcfg_data_t ahbcfg = { .d32 = 0};
ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
}
/**
* This function disables the controller's Global Interrupt in the AHB Config
* register.
*
* @param[in] core_if Programming view of DWC_otg controller.
*/
void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t *core_if)
{
gahbcfg_data_t ahbcfg = { .d32 = 0};
ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
}
/**
* This function initializes the commmon interrupts, used in both
* device and host modes.
*
* @param[in] core_if Programming view of the DWC_otg controller
*
*/
static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t *core_if)
{
dwc_otg_core_global_regs_t *global_regs =
core_if->core_global_regs;
gintmsk_data_t intr_mask = { .d32 = 0};
/* Clear any pending OTG Interrupts */
dwc_write_reg32(&global_regs->gotgint, 0xFFFFFFFF);
/* Clear any pending interrupts */
dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
/*
* Enable the interrupts in the GINTMSK.
*/
intr_mask.b.modemismatch = 1;
intr_mask.b.otgintr = 1;
if (!core_if->dma_enable) {
intr_mask.b.rxstsqlvl = 1;
}
intr_mask.b.conidstschng = 1;
intr_mask.b.wkupintr = 1;
intr_mask.b.disconnect = 1;
intr_mask.b.usbsuspend = 1;
intr_mask.b.sessreqintr = 1;
dwc_write_reg32(&global_regs->gintmsk, intr_mask.d32);
}
/**
* Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
* type.
*/
static void init_fslspclksel(dwc_otg_core_if_t *core_if)
{
uint32_t val;
hcfg_data_t hcfg;
if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
(core_if->hwcfg2.b.fs_phy_type == 1) &&
(core_if->core_params->ulpi_fs_ls)) ||
(core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
/* Full speed PHY */
val = DWC_HCFG_48_MHZ;
}
else {
/* High speed PHY running at full speed or high speed */
val = DWC_HCFG_30_60_MHZ;
}
DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg);
hcfg.b.fslspclksel = val;
dwc_write_reg32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32);
}
/**
* Initializes the DevSpd field of the DCFG register depending on the PHY type
* and the enumeration speed of the device.
*/
static void init_devspd(dwc_otg_core_if_t *core_if)
{
uint32_t val;
dcfg_data_t dcfg;
if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
(core_if->hwcfg2.b.fs_phy_type == 1) &&
(core_if->core_params->ulpi_fs_ls)) ||
(core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
/* Full speed PHY */
val = 0x3;
}
else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
/* High speed PHY running at full speed */
val = 0x1;
}
else {
/* High speed PHY running at high speed */
val = 0x0;
}
DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
dcfg.b.devspd = val;
dwc_write_reg32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
}
/**
* This function calculates the number of IN EPS
* using GHWCFG1 and GHWCFG2 registers values
*
* @param core_if Programming view of the DWC_otg controller
*/
static uint32_t calc_num_in_eps(dwc_otg_core_if_t *core_if)
{
uint32_t num_in_eps = 0;
uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3;
uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps;
int i;
for(i = 0; i < num_eps; ++i)
{
if(!(hwcfg1 & 0x1))
num_in_eps++;
hwcfg1 >>= 2;
}
if(core_if->hwcfg4.b.ded_fifo_en) {
num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
}
return num_in_eps;
}
/**
* This function calculates the number of OUT EPS
* using GHWCFG1 and GHWCFG2 registers values
*
* @param core_if Programming view of the DWC_otg controller
*/
static uint32_t calc_num_out_eps(dwc_otg_core_if_t *core_if)
{
uint32_t num_out_eps = 0;
uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2;
int i;
for(i = 0; i < num_eps; ++i)
{
if(!(hwcfg1 & 0x2))
num_out_eps++;
hwcfg1 >>= 2;
}
return num_out_eps;
}
/**
* This function initializes the DWC_otg controller registers and
* prepares the core for device mode or host mode operation.
*
* @param core_if Programming view of the DWC_otg controller
*
*/
void dwc_otg_core_init(dwc_otg_core_if_t *core_if)
{
int i = 0;
dwc_otg_core_global_regs_t *global_regs =
core_if->core_global_regs;
dwc_otg_dev_if_t *dev_if = core_if->dev_if;
gahbcfg_data_t ahbcfg = { .d32 = 0 };
gusbcfg_data_t usbcfg = { .d32 = 0 };
gi2cctl_data_t i2cctl = { .d32 = 0 };
DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n", core_if);
/* Common Initialization */
usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
// usbcfg.b.tx_end_delay = 1;
/* Program the ULPI External VBUS bit if needed */
usbcfg.b.ulpi_ext_vbus_drv =
(core_if->core_params->phy_ulpi_ext_vbus == DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;
/* Set external TS Dline pulsing */
usbcfg.b.term_sel_dl_pulse = (core_if->core_params->ts_dline == 1) ? 1 : 0;
dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
/* Reset the Controller */
dwc_otg_core_reset(core_if);
/* Initialize parameters from Hardware configuration registers. */
dev_if->num_in_eps = calc_num_in_eps(core_if);
dev_if->num_out_eps = calc_num_out_eps(core_if);
DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", core_if->hwcfg4.b.num_dev_perio_in_ep);
for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++)
{
dev_if->perio_tx_fifo_size[i] =
dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n",
i, dev_if->perio_tx_fifo_size[i]);
}
for (i=0; i < core_if->hwcfg4.b.num_in_eps; i++)
{
dev_if->tx_fifo_size[i] =
dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16;
DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n",
i, dev_if->perio_tx_fifo_size[i]);
}
core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth;
core_if->rx_fifo_size =
dwc_read_reg32(&global_regs->grxfsiz);
core_if->nperio_tx_fifo_size =
dwc_read_reg32(&global_regs->gnptxfsiz) >> 16;
DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size);
DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size);
DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", core_if->nperio_tx_fifo_size);
/* This programming sequence needs to happen in FS mode before any other
* programming occurs */
if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
(core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
/* If FS mode with FS PHY */
/* core_init() is now called on every switch so only call the
* following for the first time through. */
if (!core_if->phy_init_done) {
core_if->phy_init_done = 1;
DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
usbcfg.b.physel = 1;
dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
/* Reset after a PHY select */
dwc_otg_core_reset(core_if);
}
/* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
* do this on HNP Dev/Host mode switches (done in dev_init and
* host_init). */
if (dwc_otg_is_host_mode(core_if)) {
init_fslspclksel(core_if);
}
else {
init_devspd(core_if);
}
if (core_if->core_params->i2c_enable) {
DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
/* Program GUSBCFG.OtgUtmifsSel to I2C */
usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
usbcfg.b.otgutmifssel = 1;
dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32);
/* Program GI2CCTL.I2CEn */
i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl);
i2cctl.b.i2cdevaddr = 1;
i2cctl.b.i2cen = 0;
dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
i2cctl.b.i2cen = 1;
dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32);
}
} /* endif speed == DWC_SPEED_PARAM_FULL */
else {
/* High speed PHY. */
if (!core_if->phy_init_done) {
core_if->phy_init_done = 1;
/* HS PHY parameters. These parameters are preserved
* during soft reset so only program the first time. Do
* a soft reset immediately after setting phyif. */
usbcfg.b.ulpi_utmi_sel = core_if->core_params->phy_type;
if (usbcfg.b.ulpi_utmi_sel == 1) {
/* ULPI interface */
usbcfg.b.phyif = 0;
usbcfg.b.ddrsel = core_if->core_params->phy_ulpi_ddr;
}
else {
/* UTMI+ interface */
if (core_if->core_params->phy_utmi_width == 16) {
usbcfg.b.phyif = 1;
}
else {
usbcfg.b.phyif = 0;
}
}
dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
/* Reset after setting the PHY parameters */
dwc_otg_core_reset(core_if);
}
}
if ((core_if->hwcfg2.b.hs_phy_type == 2) &&
(core_if->hwcfg2.b.fs_phy_type == 1) &&
(core_if->core_params->ulpi_fs_ls)) {
DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
usbcfg.b.ulpi_fsls = 1;
usbcfg.b.ulpi_clk_sus_m = 1;
dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
}
else {
usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
usbcfg.b.ulpi_fsls = 0;
usbcfg.b.ulpi_clk_sus_m = 0;
dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
}
/* Program the GAHBCFG Register.*/
switch (core_if->hwcfg2.b.architecture) {
case DWC_SLAVE_ONLY_ARCH:
DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
core_if->dma_enable = 0;
core_if->dma_desc_enable = 0;
break;
case DWC_EXT_DMA_ARCH:
DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
ahbcfg.b.hburstlen = core_if->core_params->dma_burst_size;
core_if->dma_enable = (core_if->core_params->dma_enable != 0);
core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
break;
case DWC_INT_DMA_ARCH:
DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR;
core_if->dma_enable = (core_if->core_params->dma_enable != 0);
core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0);
break;
}
ahbcfg.b.dmaenable = core_if->dma_enable;
dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32);
core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en;
core_if->pti_enh_enable = core_if->core_params->pti_enable != 0;
core_if->multiproc_int_enable = core_if->core_params->mpi_enable;
DWC_PRINT("Periodic Transfer Interrupt Enhancement - %s\n", ((core_if->pti_enh_enable) ? "enabled": "disabled"));
DWC_PRINT("Multiprocessor Interrupt Enhancement - %s\n", ((core_if->multiproc_int_enable) ? "enabled": "disabled"));
/*
* Program the GUSBCFG register.
*/
usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg);
switch (core_if->hwcfg2.b.op_mode) {
case DWC_MODE_HNP_SRP_CAPABLE:
usbcfg.b.hnpcap = (core_if->core_params->otg_cap ==
DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
break;
case DWC_MODE_SRP_ONLY_CAPABLE:
usbcfg.b.hnpcap = 0;
usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
break;
case DWC_MODE_NO_HNP_SRP_CAPABLE:
usbcfg.b.hnpcap = 0;
usbcfg.b.srpcap = 0;
break;
case DWC_MODE_SRP_CAPABLE_DEVICE:
usbcfg.b.hnpcap = 0;
usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
break;
case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
usbcfg.b.hnpcap = 0;
usbcfg.b.srpcap = 0;
break;
case DWC_MODE_SRP_CAPABLE_HOST:
usbcfg.b.hnpcap = 0;
usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
break;
case DWC_MODE_NO_SRP_CAPABLE_HOST:
usbcfg.b.hnpcap = 0;
usbcfg.b.srpcap = 0;
break;
}
dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32);
/* Enable common interrupts */
dwc_otg_enable_common_interrupts(core_if);
/* Do device or host intialization based on mode during PCD
* and HCD initialization */
if (dwc_otg_is_host_mode(core_if)) {
DWC_DEBUGPL(DBG_ANY, "Host Mode\n");
core_if->op_state = A_HOST;
}
else {
DWC_DEBUGPL(DBG_ANY, "Device Mode\n");
core_if->op_state = B_PERIPHERAL;
#ifdef DWC_DEVICE_ONLY
dwc_otg_core_dev_init(core_if);
#endif
}
}
/**
* This function enables the Device mode interrupts.
*
* @param core_if Programming view of DWC_otg controller
*/
void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *core_if)
{
gintmsk_data_t intr_mask = { .d32 = 0};
dwc_otg_core_global_regs_t *global_regs =
core_if->core_global_regs;
DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
/* Disable all interrupts. */
dwc_write_reg32(&global_regs->gintmsk, 0);
/* Clear any pending interrupts */
dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
/* Enable the common interrupts */
dwc_otg_enable_common_interrupts(core_if);
/* Enable interrupts */
intr_mask.b.usbreset = 1;
intr_mask.b.enumdone = 1;
if(!core_if->multiproc_int_enable) {
intr_mask.b.inepintr = 1;
intr_mask.b.outepintr = 1;
}
intr_mask.b.erlysuspend = 1;
if(core_if->en_multiple_tx_fifo == 0) {
intr_mask.b.epmismatch = 1;
}
#ifdef DWC_EN_ISOC
if(core_if->dma_enable) {
if(core_if->dma_desc_enable == 0) {
if(core_if->pti_enh_enable) {
dctl_data_t dctl = { .d32 = 0 };
dctl.b.ifrmnum = 1;
dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
} else {
intr_mask.b.incomplisoin = 1;
intr_mask.b.incomplisoout = 1;
}
}
} else {
intr_mask.b.incomplisoin = 1;
intr_mask.b.incomplisoout = 1;
}
#endif // DWC_EN_ISOC
/** @todo NGS: Should this be a module parameter? */
#ifdef USE_PERIODIC_EP
intr_mask.b.isooutdrop = 1;
intr_mask.b.eopframe = 1;
intr_mask.b.incomplisoin = 1;
intr_mask.b.incomplisoout = 1;
#endif
dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__,
dwc_read_reg32(&global_regs->gintmsk));
}
/**
* This function initializes the DWC_otg controller registers for
* device mode.
*
* @param core_if Programming view of DWC_otg controller
*
*/
void dwc_otg_core_dev_init(dwc_otg_core_if_t *core_if)
{
int i,size;
u_int32_t *default_value_array;
dwc_otg_core_global_regs_t *global_regs =
core_if->core_global_regs;
dwc_otg_dev_if_t *dev_if = core_if->dev_if;
dwc_otg_core_params_t *params = core_if->core_params;
dcfg_data_t dcfg = { .d32 = 0};
grstctl_t resetctl = { .d32 = 0 };
uint32_t rx_fifo_size;
fifosize_data_t nptxfifosize;
fifosize_data_t txfifosize;
dthrctl_data_t dthrctl;
/* Restart the Phy Clock */
dwc_write_reg32(core_if->pcgcctl, 0);
/* Device configuration register */
init_devspd(core_if);
dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg);
dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0;
dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
/* Configure data FIFO sizes */
if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", core_if->total_fifo_size);
DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->dev_rx_fifo_size);
DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", params->dev_nperio_tx_fifo_size);
/* Rx FIFO */
DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
dwc_read_reg32(&global_regs->grxfsiz));
rx_fifo_size = params->dev_rx_fifo_size;
dwc_write_reg32(&global_regs->grxfsiz, rx_fifo_size);
DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
dwc_read_reg32(&global_regs->grxfsiz));
/** Set Periodic Tx FIFO Mask all bits 0 */
core_if->p_tx_msk = 0;
/** Set Tx FIFO Mask all bits 0 */
core_if->tx_msk = 0;
/* Non-periodic Tx FIFO */
DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
dwc_read_reg32(&global_regs->gnptxfsiz));
nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
dwc_read_reg32(&global_regs->gnptxfsiz));
txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
if(core_if->en_multiple_tx_fifo == 0) {
//core_if->hwcfg4.b.ded_fifo_en==0
/**@todo NGS: Fix Periodic FIFO Sizing! */
/*
* Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
* Indexes of the FIFO size module parameters in the
* dev_perio_tx_fifo_size array and the FIFO size registers in
* the dptxfsiz array run from 0 to 14.
*/
/** @todo Finish debug of this */
size=core_if->hwcfg4.b.num_dev_perio_in_ep;
default_value_array=params->dev_perio_tx_fifo_size;
}
else {
//core_if->hwcfg4.b.ded_fifo_en==1
/*
* Tx FIFOs These FIFOs are numbered from 1 to 15.
* Indexes of the FIFO size module parameters in the
* dev_tx_fifo_size array and the FIFO size registers in
* the dptxfsiz_dieptxf array run from 0 to 14.
*/
size=core_if->hwcfg4.b.num_in_eps;
default_value_array=params->dev_tx_fifo_size;
}
for (i=0; i < size; i++)
{
txfifosize.b.depth = default_value_array[i];
DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i,
dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i],
txfifosize.d32);
DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i,
dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]));
txfifosize.b.startaddr += txfifosize.b.depth;
}
}
/* Flush the FIFOs */
dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */
dwc_otg_flush_rx_fifo(core_if);
/* Flush the Learning Queue. */
resetctl.b.intknqflsh = 1;
dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32);
/* Clear all pending Device Interrupts */
if(core_if->multiproc_int_enable) {
}
/** @todo - if the condition needed to be checked
* or in any case all pending interrutps should be cleared?
*/
if(core_if->multiproc_int_enable) {
for(i = 0; i < core_if->dev_if->num_in_eps; ++i) {
dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[i], 0);
}
for(i = 0; i < core_if->dev_if->num_out_eps; ++i) {
dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[i], 0);
}
dwc_write_reg32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF);
dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, 0);
} else {
dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, 0);
dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, 0);
dwc_write_reg32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF);
dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, 0);
}
for (i=0; i <= dev_if->num_in_eps; i++)
{
depctl_data_t depctl;
depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl);
if (depctl.b.epena) {
depctl.d32 = 0;
depctl.b.epdis = 1;
depctl.b.snak = 1;
}
else {
depctl.d32 = 0;
}
dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0);
dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
}
for (i=0; i <= dev_if->num_out_eps; i++)
{
depctl_data_t depctl;
depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl);
if (depctl.b.epena) {
depctl.d32 = 0;
depctl.b.epdis = 1;
depctl.b.snak = 1;
}
else {
depctl.d32 = 0;
}
dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32);
dwc_write_reg32(&dev_if->out_ep_regs[i]->doeptsiz, 0);
dwc_write_reg32(&dev_if->out_ep_regs[i]->doepdma, 0);
dwc_write_reg32(&dev_if->out_ep_regs[i]->doepint, 0xFF);
}
if(core_if->en_multiple_tx_fifo && core_if->dma_enable) {
dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1;
dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1;
dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1;
dev_if->rx_thr_length = params->rx_thr_length;
dev_if->tx_thr_length = params->tx_thr_length;
dev_if->setup_desc_index = 0;
dthrctl.d32 = 0;
dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
dthrctl.b.rx_thr_len = dev_if->rx_thr_length;
dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl, dthrctl.d32);
DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, dthrctl.b.rx_thr_len);
}
dwc_otg_enable_device_interrupts(core_if);
{
diepmsk_data_t msk = { .d32 = 0 };
msk.b.txfifoundrn = 1;
if(core_if->multiproc_int_enable) {
dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], msk.d32, msk.d32);
} else {
dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32, msk.d32);
}
}
if(core_if->multiproc_int_enable) {
/* Set NAK on Babble */
dctl_data_t dctl = { .d32 = 0};
dctl.b.nakonbble = 1;
dwc_modify_reg32(&dev_if->dev_global_regs->dctl, 0, dctl.d32);
}
}
/**
* This function enables the Host mode interrupts.
*
* @param core_if Programming view of DWC_otg controller
*/
void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *core_if)
{
dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
gintmsk_data_t intr_mask = { .d32 = 0 };
DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
/* Disable all interrupts. */
dwc_write_reg32(&global_regs->gintmsk, 0);
/* Clear any pending interrupts. */
dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF);
/* Enable the common interrupts */
dwc_otg_enable_common_interrupts(core_if);
/*
* Enable host mode interrupts without disturbing common
* interrupts.
*/
intr_mask.b.sofintr = 1;
intr_mask.b.portintr = 1;
intr_mask.b.hcintr = 1;
dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
}
/**
* This function disables the Host Mode interrupts.
*
* @param core_if Programming view of DWC_otg controller
*/
void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *core_if)
{
dwc_otg_core_global_regs_t *global_regs =
core_if->core_global_regs;
gintmsk_data_t intr_mask = { .d32 = 0 };
DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);
/*
* Disable host mode interrupts without disturbing common
* interrupts.
*/
intr_mask.b.sofintr = 1;
intr_mask.b.portintr = 1;
intr_mask.b.hcintr = 1;
intr_mask.b.ptxfempty = 1;
intr_mask.b.nptxfempty = 1;
dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0);
}
/**
* This function initializes the DWC_otg controller registers for
* host mode.
*
* This function flushes the Tx and Rx FIFOs and it flushes any entries in the
* request queues. Host channels are reset to ensure that they are ready for
* performing transfers.
*
* @param core_if Programming view of DWC_otg controller
*
*/
void dwc_otg_core_host_init(dwc_otg_core_if_t *core_if)
{
dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
dwc_otg_host_if_t *host_if = core_if->host_if;
dwc_otg_core_params_t *params = core_if->core_params;
hprt0_data_t hprt0 = { .d32 = 0 };
fifosize_data_t nptxfifosize;
fifosize_data_t ptxfifosize;
int i;
hcchar_data_t hcchar;
hcfg_data_t hcfg;
dwc_otg_hc_regs_t *hc_regs;
int num_channels;
gotgctl_data_t gotgctl = { .d32 = 0 };
DWC_DEBUGPL(DBG_CILV,"%s(%p)\n", __func__, core_if);
/* Restart the Phy Clock */
dwc_write_reg32(core_if->pcgcctl, 0);
/* Initialize Host Configuration Register */
init_fslspclksel(core_if);
if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL)
{
hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg);
hcfg.b.fslssupp = 1;
dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32);
}
/* Configure data FIFO sizes */
if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
DWC_DEBUGPL(DBG_CIL,"Total FIFO Size=%d\n", core_if->total_fifo_size);
DWC_DEBUGPL(DBG_CIL,"Rx FIFO Size=%d\n", params->host_rx_fifo_size);
DWC_DEBUGPL(DBG_CIL,"NP Tx FIFO Size=%d\n", params->host_nperio_tx_fifo_size);
DWC_DEBUGPL(DBG_CIL,"P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size);
/* Rx FIFO */
DWC_DEBUGPL(DBG_CIL,"initial grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
dwc_write_reg32(&global_regs->grxfsiz, params->host_rx_fifo_size);
DWC_DEBUGPL(DBG_CIL,"new grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz));
/* Non-periodic Tx FIFO */
DWC_DEBUGPL(DBG_CIL,"initial gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
nptxfifosize.b.depth = params->host_nperio_tx_fifo_size;
nptxfifosize.b.startaddr = params->host_rx_fifo_size;
dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32);
DWC_DEBUGPL(DBG_CIL,"new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz));
/* Periodic Tx FIFO */
DWC_DEBUGPL(DBG_CIL,"initial hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
ptxfifosize.b.depth = params->host_perio_tx_fifo_size;
ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth;
dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32);
DWC_DEBUGPL(DBG_CIL,"new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz));
}
/* Clear Host Set HNP Enable in the OTG Control Register */
gotgctl.b.hstsethnpen = 1;
dwc_modify_reg32(&global_regs->gotgctl, gotgctl.d32, 0);
/* Make sure the FIFOs are flushed. */
dwc_otg_flush_tx_fifo(core_if, 0x10 /* all Tx FIFOs */);
dwc_otg_flush_rx_fifo(core_if);
/* Flush out any leftover queued requests. */
num_channels = core_if->core_params->host_channels;
for (i = 0; i < num_channels; i++)
{
hc_regs = core_if->host_if->hc_regs[i];
hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
hcchar.b.chen = 0;
hcchar.b.chdis = 1;
hcchar.b.epdir = 0;
dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
}
/* Halt all channels to put them into a known state. */
for (i = 0; i < num_channels; i++)
{
int count = 0;
hc_regs = core_if->host_if->hc_regs[i];
hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
hcchar.b.chen = 1;
hcchar.b.chdis = 1;
hcchar.b.epdir = 0;
dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i);
do {
hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
if (++count > 1000)
{
DWC_ERROR("%s: Unable to clear halt on channel %d\n",
__func__, i);
break;
}
}
while (hcchar.b.chen);
}
/* Turn on the vbus power. */
DWC_PRINT("Init: Port Power? op_state=%d\n", core_if->op_state);
if (core_if->op_state == A_HOST) {
hprt0.d32 = dwc_otg_read_hprt0(core_if);
DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr);
if (hprt0.b.prtpwr == 0) {
hprt0.b.prtpwr = 1;
dwc_write_reg32(host_if->hprt0, hprt0.d32);
}
}
dwc_otg_enable_host_interrupts(core_if);
}
/**
* Prepares a host channel for transferring packets to/from a specific
* endpoint. The HCCHARn register is set up with the characteristics specified
* in _hc. Host channel interrupts that may need to be serviced while this
* transfer is in progress are enabled.
*
* @param core_if Programming view of DWC_otg controller
* @param hc Information needed to initialize the host channel
*/
void dwc_otg_hc_init(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
{
uint32_t intr_enable;
hcintmsk_data_t hc_intr_mask;
gintmsk_data_t gintmsk = { .d32 = 0 };
hcchar_data_t hcchar;
hcsplt_data_t hcsplt;
uint8_t hc_num = hc->hc_num;
dwc_otg_host_if_t *host_if = core_if->host_if;
dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];
/* Clear old interrupt conditions for this host channel. */
hc_intr_mask.d32 = 0xFFFFFFFF;
hc_intr_mask.b.reserved = 0;
dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32);
/* Enable channel interrupts required for this transfer. */
hc_intr_mask.d32 = 0;
hc_intr_mask.b.chhltd = 1;
if (core_if->dma_enable) {
hc_intr_mask.b.ahberr = 1;
if (hc->error_state && !hc->do_split &&
hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
hc_intr_mask.b.ack = 1;
if (hc->ep_is_in) {
hc_intr_mask.b.datatglerr = 1;
if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
hc_intr_mask.b.nak = 1;
}
}
}
}
else {
switch (hc->ep_type) {
case DWC_OTG_EP_TYPE_CONTROL:
case DWC_OTG_EP_TYPE_BULK:
hc_intr_mask.b.xfercompl = 1;
hc_intr_mask.b.stall = 1;
hc_intr_mask.b.xacterr = 1;
hc_intr_mask.b.datatglerr = 1;
if (hc->ep_is_in) {
hc_intr_mask.b.bblerr = 1;
}
else {
hc_intr_mask.b.nak = 1;
hc_intr_mask.b.nyet = 1;
if (hc->do_ping) {
hc_intr_mask.b.ack = 1;
}
}
if (hc->do_split) {
hc_intr_mask.b.nak = 1;
if (hc->complete_split) {
hc_intr_mask.b.nyet = 1;
}
else {
hc_intr_mask.b.ack = 1;
}
}
if (hc->error_state) {
hc_intr_mask.b.ack = 1;
}
break;
case DWC_OTG_EP_TYPE_INTR:
hc_intr_mask.b.xfercompl = 1;
hc_intr_mask.b.nak = 1;
hc_intr_mask.b.stall = 1;
hc_intr_mask.b.xacterr = 1;
hc_intr_mask.b.datatglerr = 1;
hc_intr_mask.b.frmovrun = 1;
if (hc->ep_is_in) {
hc_intr_mask.b.bblerr = 1;
}
if (hc->error_state) {
hc_intr_mask.b.ack = 1;
}
if (hc->do_split) {
if (hc->complete_split) {
hc_intr_mask.b.nyet = 1;
}
else {
hc_intr_mask.b.ack = 1;
}
}
break;
case DWC_OTG_EP_TYPE_ISOC:
hc_intr_mask.b.xfercompl = 1;
hc_intr_mask.b.frmovrun = 1;
hc_intr_mask.b.ack = 1;
if (hc->ep_is_in) {
hc_intr_mask.b.xacterr = 1;
hc_intr_mask.b.bblerr = 1;
}
break;
}
}
dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32);
// if(hc->ep_type == DWC_OTG_EP_TYPE_BULK && !hc->ep_is_in)
// hc->max_packet = 512;
/* Enable the top level host channel interrupt. */
intr_enable = (1 << hc_num);
dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable);
/* Make sure host channel interrupts are enabled. */
gintmsk.b.hcintr = 1;
dwc_modify_reg32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
/*
* Program the HCCHARn register with the endpoint characteristics for
* the current transfer.
*/
hcchar.d32 = 0;
hcchar.b.devaddr = hc->dev_addr;
hcchar.b.epnum = hc->ep_num;
hcchar.b.epdir = hc->ep_is_in;
hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW);
hcchar.b.eptype = hc->ep_type;
hcchar.b.mps = hc->max_packet;
dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);
DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
DWC_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n", hcchar.b.devaddr);
DWC_DEBUGPL(DBG_HCDV, " Ep Num: %d\n", hcchar.b.epnum);
DWC_DEBUGPL(DBG_HCDV, " Is In: %d\n", hcchar.b.epdir);
DWC_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev);
DWC_DEBUGPL(DBG_HCDV, " Ep Type: %d\n", hcchar.b.eptype);
DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps);
DWC_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n", hcchar.b.multicnt);
/*
* Program the HCSPLIT register for SPLITs
*/
hcsplt.d32 = 0;
if (hc->do_split) {
DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", hc->hc_num,
hc->complete_split ? "CSPLIT" : "SSPLIT");
hcsplt.b.compsplt = hc->complete_split;
hcsplt.b.xactpos = hc->xact_pos;
hcsplt.b.hubaddr = hc->hub_addr;
hcsplt.b.prtaddr = hc->port_addr;
DWC_DEBUGPL(DBG_HCDV, " comp split %d\n", hc->complete_split);
DWC_DEBUGPL(DBG_HCDV, " xact pos %d\n", hc->xact_pos);
DWC_DEBUGPL(DBG_HCDV, " hub addr %d\n", hc->hub_addr);
DWC_DEBUGPL(DBG_HCDV, " port addr %d\n", hc->port_addr);
DWC_DEBUGPL(DBG_HCDV, " is_in %d\n", hc->ep_is_in);
DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps);
DWC_DEBUGPL(DBG_HCDV, " xferlen: %d\n", hc->xfer_len);
}
dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);
}
/**
* Attempts to halt a host channel. This function should only be called in
* Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
* normal circumstances in DMA mode, the controller halts the channel when the
* transfer is complete or a condition occurs that requires application
* intervention.
*
* In slave mode, checks for a free request queue entry, then sets the Channel
* Enable and Channel Disable bits of the Host Channel Characteristics
* register of the specified channel to intiate the halt. If there is no free
* request queue entry, sets only the Channel Disable bit of the HCCHARn
* register to flush requests for this channel. In the latter case, sets a
* flag to indicate that the host channel needs to be halted when a request
* queue slot is open.
*
* In DMA mode, always sets the Channel Enable and Channel Disable bits of the
* HCCHARn register. The controller ensures there is space in the request
* queue before submitting the halt request.
*
* Some time may elapse before the core flushes any posted requests for this
* host channel and halts. The Channel Halted interrupt handler completes the
* deactivation of the host channel.
*
* @param core_if Controller register interface.
* @param hc Host channel to halt.
* @param halt_status Reason for halting the channel.
*/
void dwc_otg_hc_halt(dwc_otg_core_if_t *core_if,
dwc_hc_t *hc,
dwc_otg_halt_status_e halt_status)
{
gnptxsts_data_t nptxsts;
hptxsts_data_t hptxsts;
hcchar_data_t hcchar;
dwc_otg_hc_regs_t *hc_regs;
dwc_otg_core_global_regs_t *global_regs;
dwc_otg_host_global_regs_t *host_global_regs;
hc_regs = core_if->host_if->hc_regs[hc->hc_num];
global_regs = core_if->core_global_regs;
host_global_regs = core_if->host_if->host_global_regs;
WARN_ON(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS);
if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
/*
* Disable all channel interrupts except Ch Halted. The QTD
* and QH state associated with this transfer has been cleared
* (in the case of URB_DEQUEUE), so the channel needs to be
* shut down carefully to prevent crashes.
*/
hcintmsk_data_t hcintmsk;
hcintmsk.d32 = 0;
hcintmsk.b.chhltd = 1;
dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32);
/*
* Make sure no other interrupts besides halt are currently
* pending. Handling another interrupt could cause a crash due
* to the QTD and QH state.
*/
dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32);
/*
* Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
* even if the channel was already halted for some other
* reason.
*/
hc->halt_status = halt_status;
hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
if (hcchar.b.chen == 0) {
/*
* The channel is either already halted or it hasn't
* started yet. In DMA mode, the transfer may halt if
* it finishes normally or a condition occurs that
* requires driver intervention. Don't want to halt
* the channel again. In either Slave or DMA mode,
* it's possible that the transfer has been assigned
* to a channel, but not started yet when an URB is
* dequeued. Don't want to halt a channel that hasn't
* started yet.
*/
return;
}
}
if (hc->halt_pending) {
/*
* A halt has already been issued for this channel. This might
* happen when a transfer is aborted by a higher level in
* the stack.
*/
#ifdef DEBUG
DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n",
__func__, hc->hc_num);
/* dwc_otg_dump_global_registers(core_if); */
/* dwc_otg_dump_host_registers(core_if); */
#endif
return;
}
hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
hcchar.b.chen = 1;
hcchar.b.chdis = 1;
if (!core_if->dma_enable) {
/* Check for space in the request queue to issue the halt. */
if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts);
if (nptxsts.b.nptxqspcavail == 0) {
hcchar.b.chen = 0;
}
}
else {
hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts);
if ((hptxsts.b.ptxqspcavail == 0) || (core_if->queuing_high_bandwidth)) {
hcchar.b.chen = 0;
}
}
}
dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
hc->halt_status = halt_status;
if (hcchar.b.chen) {
hc->halt_pending = 1;
hc->halt_on_queue = 0;
}
else {
hc->halt_on_queue = 1;
}
DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32);
DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", hc->halt_pending);
DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", hc->halt_on_queue);
DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", hc->halt_status);
return;
}
/**
* Clears the transfer state for a host channel. This function is normally
* called after a transfer is done and the host channel is being released.
*
* @param core_if Programming view of DWC_otg controller.
* @param hc Identifies the host channel to clean up.
*/
void dwc_otg_hc_cleanup(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
{
dwc_otg_hc_regs_t *hc_regs;
hc->xfer_started = 0;
/*
* Clear channel interrupt enables and any unhandled channel interrupt
* conditions.
*/
hc_regs = core_if->host_if->hc_regs[hc->hc_num];
dwc_write_reg32(&hc_regs->hcintmsk, 0);
dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF);
#ifdef DEBUG
del_timer(&core_if->hc_xfer_timer[hc->hc_num]);
{
hcchar_data_t hcchar;
hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
if (hcchar.b.chdis) {
DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
__func__, hc->hc_num, hcchar.d32);
}
}
#endif
}
/**
* Sets the channel property that indicates in which frame a periodic transfer
* should occur. This is always set to the _next_ frame. This function has no
* effect on non-periodic transfers.
*
* @param core_if Programming view of DWC_otg controller.
* @param hc Identifies the host channel to set up and its properties.
* @param hcchar Current value of the HCCHAR register for the specified host
* channel.
*/
static inline void hc_set_even_odd_frame(dwc_otg_core_if_t *core_if,
dwc_hc_t *hc,
hcchar_data_t *hcchar)
{
if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
hfnum_data_t hfnum;
hfnum.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hfnum);
/* 1 if _next_ frame is odd, 0 if it's even */
hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
#ifdef DEBUG
if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split && !hc->complete_split) {
switch (hfnum.b.frnum & 0x7) {
case 7:
core_if->hfnum_7_samples++;
core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
break;
case 0:
core_if->hfnum_0_samples++;
core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
break;
default:
core_if->hfnum_other_samples++;
core_if->hfnum_other_frrem_accum += hfnum.b.frrem;
break;
}
}
#endif
}
}
#ifdef DEBUG
static void hc_xfer_timeout(unsigned long ptr)
{
hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)ptr;
int hc_num = xfer_info->hc->hc_num;
DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
DWC_WARN(" start_hcchar_val 0x%08x\n", xfer_info->core_if->start_hcchar_val[hc_num]);
}
#endif
/*
* This function does the setup for a data transfer for a host channel and
* starts the transfer. May be called in either Slave mode or DMA mode. In
* Slave mode, the caller must ensure that there is sufficient space in the
* request queue and Tx Data FIFO.
*
* For an OUT transfer in Slave mode, it loads a data packet into the
* appropriate FIFO. If necessary, additional data packets will be loaded in
* the Host ISR.
*
* For an IN transfer in Slave mode, a data packet is requested. The data
* packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
* additional data packets are requested in the Host ISR.
*
* For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
* register along with a packet count of 1 and the channel is enabled. This
* causes a single PING transaction to occur. Other fields in HCTSIZ are
* simply set to 0 since no data transfer occurs in this case.
*
* For a PING transfer in DMA mode, the HCTSIZ register is initialized with
* all the information required to perform the subsequent data transfer. In
* addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
* controller performs the entire PING protocol, then starts the data
* transfer.
*
* @param core_if Programming view of DWC_otg controller.
* @param hc Information needed to initialize the host channel. The xfer_len
* value may be reduced to accommodate the max widths of the XferSize and
* PktCnt fields in the HCTSIZn register. The multi_count value may be changed
* to reflect the final xfer_len value.
*/
void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
{
hcchar_data_t hcchar;
hctsiz_data_t hctsiz;
uint16_t num_packets;
uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size;
uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count;
dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
hctsiz.d32 = 0;
if (hc->do_ping) {
if (!core_if->dma_enable) {
dwc_otg_hc_do_ping(core_if, hc);
hc->xfer_started = 1;
return;
}
else {
hctsiz.b.dopng = 1;
}
}
if (hc->do_split) {
num_packets = 1;
if (hc->complete_split && !hc->ep_is_in) {
/* For CSPLIT OUT Transfer, set the size to 0 so the
* core doesn't expect any data written to the FIFO */
hc->xfer_len = 0;
}
else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) {
hc->xfer_len = hc->max_packet;
}
else if (!hc->ep_is_in && (hc->xfer_len > 188)) {
hc->xfer_len = 188;
}
hctsiz.b.xfersize = hc->xfer_len;
}
else {
/*
* Ensure that the transfer length and packet count will fit
* in the widths allocated for them in the HCTSIZn register.
*/
if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
/*
* Make sure the transfer size is no larger than one
* (micro)frame's worth of data. (A check was done
* when the periodic transfer was accepted to ensure
* that a (micro)frame's worth of data can be
* programmed into a channel.)
*/
uint32_t max_periodic_len = hc->multi_count * hc->max_packet;
if (hc->xfer_len > max_periodic_len) {
hc->xfer_len = max_periodic_len;
}
else {
}
}
else if (hc->xfer_len > max_hc_xfer_size) {
/* Make sure that xfer_len is a multiple of max packet size. */
hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1;
}
if (hc->xfer_len > 0) {
num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet;
if (num_packets > max_hc_pkt_count) {
num_packets = max_hc_pkt_count;
hc->xfer_len = num_packets * hc->max_packet;
}
}
else {
/* Need 1 packet for transfer length of 0. */
num_packets = 1;
}
#if 0
//host testusb item 10, would do series of Control transfer
//with URB_SHORT_NOT_OK set in transfer_flags ,
//changing the xfer_len would cause the test fail
if (hc->ep_is_in) {
/* Always program an integral # of max packets for IN transfers. */
hc->xfer_len = num_packets * hc->max_packet;
}
#endif
if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
/*
* Make sure that the multi_count field matches the
* actual transfer length.
*/
hc->multi_count = num_packets;
}
if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
/* Set up the initial PID for the transfer. */
if (hc->speed == DWC_OTG_EP_SPEED_HIGH) {
if (hc->ep_is_in) {
if (hc->multi_count == 1) {
hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
}
else if (hc->multi_count == 2) {
hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
}
else {
hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
}
}
else {
if (hc->multi_count == 1) {
hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
}
else {
hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
}
}
}
else {
hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
}
}
hctsiz.b.xfersize = hc->xfer_len;
}
hc->start_pkt_count = num_packets;
hctsiz.b.pktcnt = num_packets;
hctsiz.b.pid = hc->data_pid_start;
dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize);
DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt);
DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid);
if (core_if->dma_enable) {
dwc_write_reg32(&hc_regs->hcdma, (uint32_t)hc->xfer_buff);
}
/* Start the split */
if (hc->do_split) {
hcsplt_data_t hcsplt;
hcsplt.d32 = dwc_read_reg32 (&hc_regs->hcsplt);
hcsplt.b.spltena = 1;
dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32);
}
hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
hcchar.b.multicnt = hc->multi_count;
hc_set_even_odd_frame(core_if, hc, &hcchar);
#ifdef DEBUG
core_if->start_hcchar_val[hc->hc_num] = hcchar.d32;
if (hcchar.b.chdis) {
DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
__func__, hc->hc_num, hcchar.d32);
}
#endif
/* Set host channel enable after all other setup is complete. */
hcchar.b.chen = 1;
hcchar.b.chdis = 0;
dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
hc->xfer_started = 1;
hc->requests++;
if (!core_if->dma_enable &&
!hc->ep_is_in && hc->xfer_len > 0) {
/* Load OUT packet into the appropriate Tx FIFO. */
dwc_otg_hc_write_packet(core_if, hc);
}
#ifdef DEBUG
/* Start a timer for this transfer. */
core_if->hc_xfer_timer[hc->hc_num].function = hc_xfer_timeout;
core_if->hc_xfer_info[hc->hc_num].core_if = core_if;
core_if->hc_xfer_info[hc->hc_num].hc = hc;
core_if->hc_xfer_timer[hc->hc_num].data = (unsigned long)(&core_if->hc_xfer_info[hc->hc_num]);
core_if->hc_xfer_timer[hc->hc_num].expires = jiffies + (HZ*10);
add_timer(&core_if->hc_xfer_timer[hc->hc_num]);
#endif
}
/**
* This function continues a data transfer that was started by previous call
* to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
* sufficient space in the request queue and Tx Data FIFO. This function
* should only be called in Slave mode. In DMA mode, the controller acts
* autonomously to complete transfers programmed to a host channel.
*
* For an OUT transfer, a new data packet is loaded into the appropriate FIFO
* if there is any data remaining to be queued. For an IN transfer, another
* data packet is always requested. For the SETUP phase of a control transfer,
* this function does nothing.
*
* @return 1 if a new request is queued, 0 if no more requests are required
* for this transfer.
*/
int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
{
DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
if (hc->do_split) {
/* SPLITs always queue just once per channel */
return 0;
}
else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
/* SETUPs are queued only once since they can't be NAKed. */
return 0;
}
else if (hc->ep_is_in) {
/*
* Always queue another request for other IN transfers. If
* back-to-back INs are issued and NAKs are received for both,
* the driver may still be processing the first NAK when the
* second NAK is received. When the interrupt handler clears
* the NAK interrupt for the first NAK, the second NAK will
* not be seen. So we can't depend on the NAK interrupt
* handler to requeue a NAKed request. Instead, IN requests
* are issued each time this function is called. When the
* transfer completes, the extra requests for the channel will
* be flushed.
*/
hcchar_data_t hcchar;
dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
hc_set_even_odd_frame(core_if, hc, &hcchar);
hcchar.b.chen = 1;
hcchar.b.chdis = 0;
DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", hcchar.d32);
dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
hc->requests++;
return 1;
}
else {
/* OUT transfers. */
if (hc->xfer_count < hc->xfer_len) {
if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
hcchar_data_t hcchar;
dwc_otg_hc_regs_t *hc_regs;
hc_regs = core_if->host_if->hc_regs[hc->hc_num];
hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
hc_set_even_odd_frame(core_if, hc, &hcchar);
}
/* Load OUT packet into the appropriate Tx FIFO. */
dwc_otg_hc_write_packet(core_if, hc);
hc->requests++;
return 1;
}
else {
return 0;
}
}
}
/**
* Starts a PING transfer. This function should only be called in Slave mode.
* The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
*/
void dwc_otg_hc_do_ping(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
{
hcchar_data_t hcchar;
hctsiz_data_t hctsiz;
dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
hctsiz.d32 = 0;
hctsiz.b.dopng = 1;
hctsiz.b.pktcnt = 1;
dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32);
hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar);
hcchar.b.chen = 1;
hcchar.b.chdis = 0;
dwc_write_reg32(&hc_regs->hcchar, hcchar.d32);
}
/*
* This function writes a packet into the Tx FIFO associated with the Host
* Channel. For a channel associated with a non-periodic EP, the non-periodic
* Tx FIFO is written. For a channel associated with a periodic EP, the
* periodic Tx FIFO is written. This function should only be called in Slave
* mode.
*
* Upon return the xfer_buff and xfer_count fields in _hc are incremented by
* then number of bytes written to the Tx FIFO.
*/
void dwc_otg_hc_write_packet(dwc_otg_core_if_t *core_if, dwc_hc_t *hc)
{
uint32_t i;
uint32_t remaining_count;
uint32_t byte_count;
uint32_t dword_count;
uint32_t *data_buff = (uint32_t *)(hc->xfer_buff);
uint32_t *data_fifo = core_if->data_fifo[hc->hc_num];
remaining_count = hc->xfer_len - hc->xfer_count;
if (remaining_count > hc->max_packet) {
byte_count = hc->max_packet;
}
else {
byte_count = remaining_count;
}
dword_count = (byte_count + 3) / 4;
if ((((unsigned long)data_buff) & 0x3) == 0) {
/* xfer_buff is DWORD aligned. */
for (i = 0; i < dword_count; i++, data_buff++)
{
dwc_write_reg32(data_fifo, *data_buff);
}
}
else {
/* xfer_buff is not DWORD aligned. */
for (i = 0; i < dword_count; i++, data_buff++)
{
dwc_write_reg32(data_fifo, get_unaligned(data_buff));
}
}
hc->xfer_count += byte_count;
hc->xfer_buff += byte_count;
}
/**
* Gets the current USB frame number. This is the frame number from the last
* SOF packet.
*/
uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *core_if)
{
dsts_data_t dsts;
dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
/* read current frame/microframe number from DSTS register */
return dsts.b.soffn;
}
/**
* This function reads a setup packet from the Rx FIFO into the destination
* buffer. This function is called from the Rx Status Queue Level (RxStsQLvl)
* Interrupt routine when a SETUP packet has been received in Slave mode.
*
* @param core_if Programming view of DWC_otg controller.
* @param dest Destination buffer for packet data.
*/
void dwc_otg_read_setup_packet(dwc_otg_core_if_t *core_if, uint32_t *dest)
{
/* Get the 8 bytes of a setup transaction data */
/* Pop 2 DWORDS off the receive data FIFO into memory */
dest[0] = dwc_read_reg32(core_if->data_fifo[0]);
dest[1] = dwc_read_reg32(core_if->data_fifo[0]);
}
/**
* This function enables EP0 OUT to receive SETUP packets and configures EP0
* IN for transmitting packets. It is normally called when the
* "Enumeration Done" interrupt occurs.
*
* @param core_if Programming view of DWC_otg controller.
* @param ep The EP0 data.
*/
void dwc_otg_ep0_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
dwc_otg_dev_if_t *dev_if = core_if->dev_if;
dsts_data_t dsts;
depctl_data_t diepctl;
depctl_data_t doepctl;
dctl_data_t dctl = { .d32 = 0 };
/* Read the Device Status and Endpoint 0 Control registers */
dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts);
diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl);
doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl);
/* Set the MPS of the IN EP based on the enumeration speed */
switch (dsts.b.enumspd) {
case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
diepctl.b.mps = DWC_DEP0CTL_MPS_64;
break;
case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
diepctl.b.mps = DWC_DEP0CTL_MPS_8;
break;
}
dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
/* Enable OUT EP for receive */
doepctl.b.epena = 1;
dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
#ifdef VERBOSE
DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n",
dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl));
DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n",
dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl));
#endif
dctl.b.cgnpinnak = 1;
dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
DWC_DEBUGPL(DBG_PCDV,"dctl=%0x\n",
dwc_read_reg32(&dev_if->dev_global_regs->dctl));
}
/**
* This function activates an EP. The Device EP control register for
* the EP is configured as defined in the ep structure. Note: This
* function is not used for EP0.
*
* @param core_if Programming view of DWC_otg controller.
* @param ep The EP to activate.
*/
void dwc_otg_ep_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
dwc_otg_dev_if_t *dev_if = core_if->dev_if;
depctl_data_t depctl;
volatile uint32_t *addr;
daint_data_t daintmsk = { .d32 = 0 };
DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num,
(ep->is_in?"IN":"OUT"));
/* Read DEPCTLn register */
if (ep->is_in == 1) {
addr = &dev_if->in_ep_regs[ep->num]->diepctl;
daintmsk.ep.in = 1<<ep->num;
}
else {
addr = &dev_if->out_ep_regs[ep->num]->doepctl;
daintmsk.ep.out = 1<<ep->num;
}
/* If the EP is already active don't change the EP Control
* register. */
depctl.d32 = dwc_read_reg32(addr);
if (!depctl.b.usbactep) {
depctl.b.mps = ep->maxpacket;
depctl.b.eptype = ep->type;
depctl.b.txfnum = ep->tx_fifo_num;
if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
depctl.b.setd0pid = 1; // ???
}
else {
depctl.b.setd0pid = 1;
}
depctl.b.usbactep = 1;
dwc_write_reg32(addr, depctl.d32);
DWC_DEBUGPL(DBG_PCDV,"DEPCTL(%.8x)=%08x\n",(u32)addr, dwc_read_reg32(addr));
}
/* Enable the Interrupt for this EP */
if(core_if->multiproc_int_enable) {
if (ep->is_in == 1) {
diepmsk_data_t diepmsk = { .d32 = 0};
diepmsk.b.xfercompl = 1;
diepmsk.b.timeout = 1;
diepmsk.b.epdisabled = 1;
diepmsk.b.ahberr = 1;
diepmsk.b.intknepmis = 1;
diepmsk.b.txfifoundrn = 1; //?????
if(core_if->dma_desc_enable) {
diepmsk.b.bna = 1;
}
/*
if(core_if->dma_enable) {
doepmsk.b.nak = 1;
}
*/
dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num], diepmsk.d32);
} else {
doepmsk_data_t doepmsk = { .d32 = 0};
doepmsk.b.xfercompl = 1;
doepmsk.b.ahberr = 1;
doepmsk.b.epdisabled = 1;
if(core_if->dma_desc_enable) {
doepmsk.b.bna = 1;
}
/*
doepmsk.b.babble = 1;
doepmsk.b.nyet = 1;
doepmsk.b.nak = 1;
*/
dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[ep->num], doepmsk.d32);
}
dwc_modify_reg32(&dev_if->dev_global_regs->deachintmsk,
0, daintmsk.d32);
} else {
dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk,
0, daintmsk.d32);
}
DWC_DEBUGPL(DBG_PCDV,"DAINTMSK=%0x\n",
dwc_read_reg32(&dev_if->dev_global_regs->daintmsk));
ep->stall_clear_flag = 0;
return;
}
/**
* This function deactivates an EP. This is done by clearing the USB Active
* EP bit in the Device EP control register. Note: This function is not used
* for EP0. EP0 cannot be deactivated.
*
* @param core_if Programming view of DWC_otg controller.
* @param ep The EP to deactivate.
*/
void dwc_otg_ep_deactivate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
depctl_data_t depctl = { .d32 = 0 };
volatile uint32_t *addr;
daint_data_t daintmsk = { .d32 = 0};
/* Read DEPCTLn register */
if (ep->is_in == 1) {
addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
daintmsk.ep.in = 1<<ep->num;
}
else {
addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
daintmsk.ep.out = 1<<ep->num;
}
//disabled ep only when ep is enabled
//or got halt in the loop in test in cv9
depctl.d32=dwc_read_reg32(addr);
if(depctl.b.epena){
if (ep->is_in == 1) {
diepint_data_t diepint;
dwc_otg_dev_in_ep_regs_t *in_reg=core_if->dev_if->in_ep_regs[ep->num];
//Set ep nak
depctl.d32=dwc_read_reg32(&in_reg->diepctl);
depctl.b.snak=1;
dwc_write_reg32(&in_reg->diepctl,depctl.d32);
//wait for diepint.b.inepnakeff
diepint.d32=dwc_read_reg32(&in_reg->diepint);
while(!diepint.b.inepnakeff){
udelay(1);
diepint.d32=dwc_read_reg32(&in_reg->diepint);
}
diepint.d32=0;
diepint.b.inepnakeff=1;
dwc_write_reg32(&in_reg->diepint,diepint.d32);
//set ep disable and snak
depctl.d32=dwc_read_reg32(&in_reg->diepctl);
depctl.b.snak=1;
depctl.b.epdis=1;
dwc_write_reg32(&in_reg->diepctl,depctl.d32);
//wait for diepint.b.epdisabled
diepint.d32=dwc_read_reg32(&in_reg->diepint);
while(!diepint.b.epdisabled){
udelay(1);
diepint.d32=dwc_read_reg32(&in_reg->diepint);
}
diepint.d32=0;
diepint.b.epdisabled=1;
dwc_write_reg32(&in_reg->diepint,diepint.d32);
//clear ep enable and disable bit
depctl.d32=dwc_read_reg32(&in_reg->diepctl);
depctl.b.epena=0;
depctl.b.epdis=0;
dwc_write_reg32(&in_reg->diepctl,depctl.d32);
}
#if 0
//following DWC OTG DataBook v2.72a, 6.4.2.1.3 Disabling an OUT Endpoint,
//but this doesn't work, the old code do.
else {
doepint_data_t doepint;
dwc_otg_dev_out_ep_regs_t *out_reg=core_if->dev_if->out_ep_regs[ep->num];
dctl_data_t dctl;
gintsts_data_t gintsts;
//set dctl global out nak
dctl.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dctl);
dctl.b.sgoutnak=1;
dwc_write_reg32(&core_if->dev_if->dev_global_regs->dctl,dctl.d32);
//wait for gintsts.goutnakeff
gintsts.d32=dwc_read_reg32(&core_if->core_global_regs->gintsts);
while(!gintsts.b.goutnakeff){
udelay(1);
gintsts.d32=dwc_read_reg32(&core_if->core_global_regs->gintsts);
}
gintsts.d32=0;
gintsts.b.goutnakeff=1;
dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32);
//set ep disable and snak
depctl.d32=dwc_read_reg32(&out_reg->doepctl);
depctl.b.snak=1;
depctl.b.epdis=1;
dwc_write_reg32(&out_reg->doepctl,depctl.d32);
//wait for diepint.b.epdisabled
doepint.d32=dwc_read_reg32(&out_reg->doepint);
while(!doepint.b.epdisabled){
udelay(1);
doepint.d32=dwc_read_reg32(&out_reg->doepint);
}
doepint.d32=0;
doepint.b.epdisabled=1;
dwc_write_reg32(&out_reg->doepint,doepint.d32);
//clear ep enable and disable bit
depctl.d32=dwc_read_reg32(&out_reg->doepctl);
depctl.b.epena=0;
depctl.b.epdis=0;
dwc_write_reg32(&out_reg->doepctl,depctl.d32);
}
#endif
depctl.d32=0;
depctl.b.usbactep = 0;
if (ep->is_in == 0) {
if(core_if->dma_enable||core_if->dma_desc_enable)
depctl.b.epdis = 1;
}
dwc_write_reg32(addr, depctl.d32);
}
/* Disable the Interrupt for this EP */
if(core_if->multiproc_int_enable) {
dwc_modify_reg32(&core_if->dev_if->dev_global_regs->deachintmsk,
daintmsk.d32, 0);
if (ep->is_in == 1) {
dwc_write_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[ep->num], 0);
} else {
dwc_write_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[ep->num], 0);
}
} else {
dwc_modify_reg32(&core_if->dev_if->dev_global_regs->daintmsk,
daintmsk.d32, 0);
}
if (ep->is_in == 1) {
DWC_DEBUGPL(DBG_PCD, "DIEPCTL(%.8x)=%08x DIEPTSIZ=%08x, DIEPINT=%.8x, DIEPDMA=%.8x, DTXFSTS=%.8x\n",
(u32)&core_if->dev_if->in_ep_regs[ep->num]->diepctl,
dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->diepctl),
dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz),
dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->diepint),
dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->diepdma),
dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts));
DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
dwc_read_reg32(&core_if->core_global_regs->gintmsk));
}
else {
DWC_DEBUGPL(DBG_PCD, "DOEPCTL(%.8x)=%08x DOEPTSIZ=%08x, DOEPINT=%.8x, DOEPDMA=%.8x\n",
(u32)&core_if->dev_if->out_ep_regs[ep->num]->doepctl,
dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doepctl),
dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz),
dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doepint),
dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doepdma));
DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
dwc_read_reg32(&core_if->core_global_regs->gintmsk));
}
}
/**
* This function does the setup for a data transfer for an EP and
* starts the transfer. For an IN transfer, the packets will be
* loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
* the packets are unloaded from the Rx FIFO in the ISR. the ISR.
*
* @param core_if Programming view of DWC_otg controller.
* @param ep The EP to start the transfer on.
*/
static void init_dma_desc_chain(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
dwc_otg_dma_desc_t* dma_desc;
uint32_t offset;
uint32_t xfer_est;
int i;
ep->desc_cnt = ( ep->total_len / ep->maxxfer) +
((ep->total_len % ep->maxxfer) ? 1 : 0);
if(!ep->desc_cnt)
ep->desc_cnt = 1;
dma_desc = ep->desc_addr;
xfer_est = ep->total_len;
offset = 0;
for( i = 0; i < ep->desc_cnt; ++i) {
/** DMA Descriptor Setup */
if(xfer_est > ep->maxxfer) {
dma_desc->status.b.bs = BS_HOST_BUSY;
dma_desc->status.b.l = 0;
dma_desc->status.b.ioc = 0;
dma_desc->status.b.sp = 0;
dma_desc->status.b.bytes = ep->maxxfer;
dma_desc->buf = ep->dma_addr + offset;
dma_desc->status.b.bs = BS_HOST_READY;
xfer_est -= ep->maxxfer;
offset += ep->maxxfer;
} else {
dma_desc->status.b.bs = BS_HOST_BUSY;
dma_desc->status.b.l = 1;
dma_desc->status.b.ioc = 1;
if(ep->is_in) {
dma_desc->status.b.sp = (xfer_est % ep->maxpacket) ?
1 : ((ep->sent_zlp) ? 1 : 0);
dma_desc->status.b.bytes = xfer_est;
} else {
dma_desc->status.b.bytes = xfer_est + ((4 - (xfer_est & 0x3)) & 0x3) ;
}
dma_desc->buf = ep->dma_addr + offset;
dma_desc->status.b.bs = BS_HOST_READY;
}
dma_desc ++;
}
}
/**
* This function does the setup for a data transfer for an EP and
* starts the transfer. For an IN transfer, the packets will be
* loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
* the packets are unloaded from the Rx FIFO in the ISR. the ISR.
*
* @param core_if Programming view of DWC_otg controller.
* @param ep The EP to start the transfer on.
*/
void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
depctl_data_t depctl;
deptsiz_data_t deptsiz;
gintmsk_data_t intr_mask = { .d32 = 0};
DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
"xfer_buff=%p start_xfer_buff=%p\n",
ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);
/* IN endpoint */
if (ep->is_in == 1) {
dwc_otg_dev_in_ep_regs_t *in_regs =
core_if->dev_if->in_ep_regs[ep->num];
gnptxsts_data_t gtxstatus;
gtxstatus.d32 =
dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
#ifdef DEBUG
DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32);
#endif
return;
}
depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
ep->maxxfer : (ep->total_len - ep->xfer_len);
/* Zero Length Packet? */
if ((ep->xfer_len - ep->xfer_count) == 0) {
deptsiz.b.xfersize = 0;
deptsiz.b.pktcnt = 1;
}
else {
/* Program the transfer size and packet count
* as follows: xfersize = N * maxpacket +
* short_packet pktcnt = N + (short_packet
* exist ? 1 : 0)
*/
deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
deptsiz.b.pktcnt =
(ep->xfer_len - ep->xfer_count - 1 + ep->maxpacket) /
ep->maxpacket;
}
/* Write the DMA register */
if (core_if->dma_enable) {
if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
}
DWC_DEBUGPL(DBG_PCDV, "ep%d dma_addr=%.8x\n", ep->num, ep->dma_addr);
if (core_if->dma_desc_enable == 0) {
dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
VERIFY_PCD_DMA_ADDR(ep->dma_addr);
dwc_write_reg32 (&(in_regs->diepdma),
(uint32_t)ep->dma_addr);
}
else {
init_dma_desc_chain(core_if, ep);
/** DIEPDMAn Register write */
VERIFY_PCD_DMA_ADDR(ep->dma_desc_addr);
dwc_write_reg32(&in_regs->diepdma, ep->dma_desc_addr);
}
}
else
{
dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
if(ep->type != DWC_OTG_EP_TYPE_ISOC) {
/**
* Enable the Non-Periodic Tx FIFO empty interrupt,
* or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
* the data will be written into the fifo by the ISR.
*/
if(core_if->en_multiple_tx_fifo == 0) {
intr_mask.b.nptxfempty = 1;
dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
intr_mask.d32, intr_mask.d32);
}
else {
/* Enable the Tx FIFO Empty Interrupt for this EP */
if(ep->xfer_len > 0) {
uint32_t fifoemptymsk = 0;
fifoemptymsk = 1 << ep->num;
dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
0, fifoemptymsk);
}
}
}
}
/* EP enable, IN data in FIFO */
depctl.b.cnak = 1;
depctl.b.epena = 1;
dwc_write_reg32(&in_regs->diepctl, depctl.d32);
depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
depctl.b.nextep = ep->num;
dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
DWC_DEBUGPL(DBG_PCD, "DIEPCTL(%.8x)=%08x DIEPTSIZ=%08x, DIEPINT=%.8x, DIEPDMA=%.8x, DTXFSTS=%.8x\n",
(u32)&in_regs->diepctl,
dwc_read_reg32(&in_regs->diepctl),
dwc_read_reg32(&in_regs->dieptsiz),
dwc_read_reg32(&in_regs->diepint),
dwc_read_reg32(&in_regs->diepdma),
dwc_read_reg32(&in_regs->dtxfsts));
DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
dwc_read_reg32(&core_if->core_global_regs->gintmsk));
}
else {
/* OUT endpoint */
dwc_otg_dev_out_ep_regs_t *out_regs =
core_if->dev_if->out_ep_regs[ep->num];
depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
ep->maxxfer : (ep->total_len - ep->xfer_len);
/* Program the transfer size and packet count as follows:
*
* pktcnt = N
* xfersize = N * maxpacket
*/
if ((ep->xfer_len - ep->xfer_count) == 0) {
/* Zero Length Packet */
deptsiz.b.xfersize = ep->maxpacket;
deptsiz.b.pktcnt = 1;
}
else {
deptsiz.b.pktcnt =
(ep->xfer_len - ep->xfer_count + (ep->maxpacket - 1)) /
ep->maxpacket;
ep->xfer_len = deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count;
deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
}
DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
ep->num,
deptsiz.b.xfersize, deptsiz.b.pktcnt);
if (core_if->dma_enable) {
if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
}
DWC_DEBUGPL(DBG_PCDV, "ep%d dma_addr=%.8x\n",
ep->num,
ep->dma_addr);
if (!core_if->dma_desc_enable) {
dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
VERIFY_PCD_DMA_ADDR(ep->dma_addr);
dwc_write_reg32 (&(out_regs->doepdma),
(uint32_t)ep->dma_addr);
}
else {
init_dma_desc_chain(core_if, ep);
/** DOEPDMAn Register write */
VERIFY_PCD_DMA_ADDR(ep->dma_desc_addr);
dwc_write_reg32(&out_regs->doepdma, ep->dma_desc_addr);
}
}
else {
dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
}
/* EP enable */
depctl.b.cnak = 1;
depctl.b.epena = 1;
dwc_write_reg32(&out_regs->doepctl, depctl.d32);
DWC_DEBUGPL(DBG_PCD, "DOEPCTL(%.8x)=%08x DOEPTSIZ=%08x, DOEPINT=%.8x, DOEPDMA=%.8x\n",
(u32)&out_regs->doepctl,
dwc_read_reg32(&out_regs->doepctl),
dwc_read_reg32(&out_regs->doeptsiz),
dwc_read_reg32(&out_regs->doepint),
dwc_read_reg32(&out_regs->doepdma));
DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk),
dwc_read_reg32(&core_if->core_global_regs->gintmsk));
}
}
/**
* This function setup a zero length transfer in Buffer DMA and
* Slave modes for usb requests with zero field set
*
* @param core_if Programming view of DWC_otg controller.
* @param ep The EP to start the transfer on.
*
*/
void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
depctl_data_t depctl;
deptsiz_data_t deptsiz;
gintmsk_data_t intr_mask = { .d32 = 0};
DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
/* IN endpoint */
if (ep->is_in == 1) {
dwc_otg_dev_in_ep_regs_t *in_regs =
core_if->dev_if->in_ep_regs[ep->num];
depctl.d32 = dwc_read_reg32(&(in_regs->diepctl));
deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz));
deptsiz.b.xfersize = 0;
deptsiz.b.pktcnt = 1;
/* Write the DMA register */
if (core_if->dma_enable) {
if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
}
if (core_if->dma_desc_enable == 0) {
dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
VERIFY_PCD_DMA_ADDR(ep->dma_addr);
dwc_write_reg32 (&(in_regs->diepdma),
(uint32_t)ep->dma_addr);
}
}
else {
dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
/**
* Enable the Non-Periodic Tx FIFO empty interrupt,
* or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
* the data will be written into the fifo by the ISR.
*/
if(core_if->en_multiple_tx_fifo == 0) {
intr_mask.b.nptxfempty = 1;
dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
intr_mask.d32, intr_mask.d32);
}
else {
/* Enable the Tx FIFO Empty Interrupt for this EP */
if(ep->xfer_len > 0) {
uint32_t fifoemptymsk = 0;
fifoemptymsk = 1 << ep->num;
dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
0, fifoemptymsk);
}
}
}
/* EP enable, IN data in FIFO */
depctl.b.cnak = 1;
depctl.b.epena = 1;
dwc_write_reg32(&in_regs->diepctl, depctl.d32);
depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl);
depctl.b.nextep = ep->num;
dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32);
}
else {
/* OUT endpoint */
dwc_otg_dev_out_ep_regs_t *out_regs =
core_if->dev_if->out_ep_regs[ep->num];
depctl.d32 = dwc_read_reg32(&(out_regs->doepctl));
deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz));
/* Zero Length Packet */
deptsiz.b.xfersize = ep->maxpacket;
deptsiz.b.pktcnt = 1;
if (core_if->dma_enable) {
if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
}
if (!core_if->dma_desc_enable) {
dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
VERIFY_PCD_DMA_ADDR(ep->dma_addr);
dwc_write_reg32 (&(out_regs->doepdma),
(uint32_t)ep->dma_addr);
}
}
else {
dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
}
/* EP enable */
depctl.b.cnak = 1;
depctl.b.epena = 1;
dwc_write_reg32(&out_regs->doepctl, depctl.d32);
}
}
/**
* This function does the setup for a data transfer for EP0 and starts
* the transfer. For an IN transfer, the packets will be loaded into
* the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
* unloaded from the Rx FIFO in the ISR.
*
* @param core_if Programming view of DWC_otg controller.
* @param ep The EP0 data.
*/
void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
depctl_data_t depctl;
deptsiz0_data_t deptsiz;
gintmsk_data_t intr_mask = { .d32 = 0};
dwc_otg_dma_desc_t* dma_desc;
DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
"xfer_buff=%p start_xfer_buff=%p, dma_addr=%.8x\n",
ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len,
ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff,ep->dma_addr);
ep->total_len = ep->xfer_len;
/* IN endpoint */
if (ep->is_in == 1) {
dwc_otg_dev_in_ep_regs_t *in_regs =
core_if->dev_if->in_ep_regs[0];
gnptxsts_data_t gtxstatus;
gtxstatus.d32 =
dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) {
#ifdef DEBUG
deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
DWC_DEBUGPL(DBG_PCD,"DIEPCTL0=%0x\n",
dwc_read_reg32(&in_regs->diepctl));
DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n",
deptsiz.d32,
deptsiz.b.xfersize, deptsiz.b.pktcnt);
DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n",
gtxstatus.d32);
#endif
return;
}
depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
/* Zero Length Packet? */
if (ep->xfer_len == 0) {
deptsiz.b.xfersize = 0;
deptsiz.b.pktcnt = 1;
}
else {
/* Program the transfer size and packet count
* as follows: xfersize = N * maxpacket +
* short_packet pktcnt = N + (short_packet
* exist ? 1 : 0)
*/
if (ep->xfer_len > ep->maxpacket) {
ep->xfer_len = ep->maxpacket;
deptsiz.b.xfersize = ep->maxpacket;
}
else {
deptsiz.b.xfersize = ep->xfer_len;
}
deptsiz.b.pktcnt = 1;
}
DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
ep->xfer_len,
deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
/* Write the DMA register */
if (core_if->dma_enable) {
if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
}
if(core_if->dma_desc_enable == 0) {
dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
VERIFY_PCD_DMA_ADDR(ep->dma_addr);
dwc_write_reg32 (&(in_regs->diepdma),
(uint32_t)ep->dma_addr);
}
else {
dma_desc = core_if->dev_if->in_desc_addr;
/** DMA Descriptor Setup */
dma_desc->status.b.bs = BS_HOST_BUSY;
dma_desc->status.b.l = 1;
dma_desc->status.b.ioc = 1;
dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
dma_desc->status.b.bytes = ep->xfer_len;
dma_desc->buf = ep->dma_addr;
dma_desc->status.b.bs = BS_HOST_READY;
/** DIEPDMA0 Register write */
VERIFY_PCD_DMA_ADDR(core_if->dev_if->dma_in_desc_addr);
dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
}
}
else {
dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
}
/* EP enable, IN data in FIFO */
depctl.b.cnak = 1;
depctl.b.epena = 1;
dwc_write_reg32(&in_regs->diepctl, depctl.d32);
/**
* Enable the Non-Periodic Tx FIFO empty interrupt, the
* data will be written into the fifo by the ISR.
*/
if (!core_if->dma_enable) {
if(core_if->en_multiple_tx_fifo == 0) {
intr_mask.b.nptxfempty = 1;
dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
intr_mask.d32, intr_mask.d32);
}
else {
/* Enable the Tx FIFO Empty Interrupt for this EP */
if(ep->xfer_len > 0) {
uint32_t fifoemptymsk = 0;
fifoemptymsk |= 1 << ep->num;
dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
0, fifoemptymsk);
}
}
}
}
else {
/* OUT endpoint */
dwc_otg_dev_out_ep_regs_t *out_regs =
core_if->dev_if->out_ep_regs[0];
depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
/* Program the transfer size and packet count as follows:
* xfersize = N * (maxpacket + 4 - (maxpacket % 4))
* pktcnt = N */
/* Zero Length Packet */
deptsiz.b.xfersize = ep->maxpacket;
deptsiz.b.pktcnt = 1;
DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n",
ep->xfer_len,
deptsiz.b.xfersize, deptsiz.b.pktcnt);
if (core_if->dma_enable) {
if (/*(core_if->dma_enable)&&*/(ep->dma_addr==DMA_ADDR_INVALID)) {
ep->dma_addr=dma_map_single(NULL,(void *)(ep->xfer_buff),(ep->xfer_len),DMA_TO_DEVICE);
}
if(!core_if->dma_desc_enable) {
dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
VERIFY_PCD_DMA_ADDR(ep->dma_addr);
dwc_write_reg32 (&(out_regs->doepdma),
(uint32_t)ep->dma_addr);
}
else {
dma_desc = core_if->dev_if->out_desc_addr;
/** DMA Descriptor Setup */
dma_desc->status.b.bs = BS_HOST_BUSY;
dma_desc->status.b.l = 1;
dma_desc->status.b.ioc = 1;
dma_desc->status.b.bytes = ep->maxpacket;
dma_desc->buf = ep->dma_addr;
dma_desc->status.b.bs = BS_HOST_READY;
/** DOEPDMA0 Register write */
VERIFY_PCD_DMA_ADDR(core_if->dev_if->dma_out_desc_addr);
dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
}
}
else {
dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
}
/* EP enable */
depctl.b.cnak = 1;
depctl.b.epena = 1;
dwc_write_reg32 (&(out_regs->doepctl), depctl.d32);
}
}
/**
* This function continues control IN transfers started by
* dwc_otg_ep0_start_transfer, when the transfer does not fit in a
* single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
* bit for the packet count.
*
* @param core_if Programming view of DWC_otg controller.
* @param ep The EP0 data.
*/
void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
depctl_data_t depctl;
deptsiz0_data_t deptsiz;
gintmsk_data_t intr_mask = { .d32 = 0};
dwc_otg_dma_desc_t* dma_desc;
if (ep->is_in == 1) {
dwc_otg_dev_in_ep_regs_t *in_regs =
core_if->dev_if->in_ep_regs[0];
gnptxsts_data_t tx_status = { .d32 = 0 };
tx_status.d32 = dwc_read_reg32(&core_if->core_global_regs->gnptxsts);
/** @todo Should there be check for room in the Tx
* Status Queue. If not remove the code above this comment. */
depctl.d32 = dwc_read_reg32(&in_regs->diepctl);
deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz);
/* Program the transfer size and packet count
* as follows: xfersize = N * maxpacket +
* short_packet pktcnt = N + (short_packet
* exist ? 1 : 0)
*/
if(core_if->dma_desc_enable == 0) {
deptsiz.b.xfersize = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
(ep->total_len - ep->xfer_count);
deptsiz.b.pktcnt = 1;
if(core_if->dma_enable == 0) {
ep->xfer_len += deptsiz.b.xfersize;
} else {
ep->xfer_len = deptsiz.b.xfersize;
}
dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32);
}
else {
ep->xfer_len = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket :
(ep->total_len - ep->xfer_count);
dma_desc = core_if->dev_if->in_desc_addr;
/** DMA Descriptor Setup */
dma_desc->status.b.bs = BS_HOST_BUSY;
dma_desc->status.b.l = 1;
dma_desc->status.b.ioc = 1;
dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1;
dma_desc->status.b.bytes = ep->xfer_len;
dma_desc->buf = ep->dma_addr;
dma_desc->status.b.bs = BS_HOST_READY;
/** DIEPDMA0 Register write */
VERIFY_PCD_DMA_ADDR(core_if->dev_if->dma_in_desc_addr);
dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr);
}
DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
ep->xfer_len,
deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
/* Write the DMA register */
if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
if(core_if->dma_desc_enable == 0){
VERIFY_PCD_DMA_ADDR(ep->dma_addr);
dwc_write_reg32 (&(in_regs->diepdma), (uint32_t)ep->dma_addr);
}
}
/* EP enable, IN data in FIFO */
depctl.b.cnak = 1;
depctl.b.epena = 1;
dwc_write_reg32(&in_regs->diepctl, depctl.d32);
/**
* Enable the Non-Periodic Tx FIFO empty interrupt, the
* data will be written into the fifo by the ISR.
*/
if (!core_if->dma_enable) {
if(core_if->en_multiple_tx_fifo == 0) {
/* First clear it from GINTSTS */
intr_mask.b.nptxfempty = 1;
dwc_modify_reg32(&core_if->core_global_regs->gintmsk,
intr_mask.d32, intr_mask.d32);
}
else {
/* Enable the Tx FIFO Empty Interrupt for this EP */
if(ep->xfer_len > 0) {
uint32_t fifoemptymsk = 0;
fifoemptymsk |= 1 << ep->num;
dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
0, fifoemptymsk);
}
}
}
}
else {
dwc_otg_dev_out_ep_regs_t *out_regs =
core_if->dev_if->out_ep_regs[0];
depctl.d32 = dwc_read_reg32(&out_regs->doepctl);
deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz);
/* Program the transfer size and packet count
* as follows: xfersize = N * maxpacket +
* short_packet pktcnt = N + (short_packet
* exist ? 1 : 0)
*/
deptsiz.b.xfersize = ep->maxpacket;
deptsiz.b.pktcnt = 1;
if(core_if->dma_desc_enable == 0) {
dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32);
}
else {
dma_desc = core_if->dev_if->out_desc_addr;
/** DMA Descriptor Setup */
dma_desc->status.b.bs = BS_HOST_BUSY;
dma_desc->status.b.l = 1;
dma_desc->status.b.ioc = 1;
dma_desc->status.b.bytes = ep->maxpacket;
dma_desc->buf = ep->dma_addr;
dma_desc->status.b.bs = BS_HOST_READY;
/** DOEPDMA0 Register write */
VERIFY_PCD_DMA_ADDR(core_if->dev_if->dma_out_desc_addr);
dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr);
}
DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
ep->xfer_len,
deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32);
/* Write the DMA register */
if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
if(core_if->dma_desc_enable == 0){
VERIFY_PCD_DMA_ADDR(ep->dma_addr);
dwc_write_reg32 (&(out_regs->doepdma), (uint32_t)ep->dma_addr);
}
}
/* EP enable, IN data in FIFO */
depctl.b.cnak = 1;
depctl.b.epena = 1;
dwc_write_reg32(&out_regs->doepctl, depctl.d32);
}
}
#ifdef DEBUG
void dump_msg(const u8 *buf, unsigned int length)
{
unsigned int start, num, i;
char line[52], *p;
if (length >= 512)
return;
start = 0;
while (length > 0) {
num = min(length, 16u);
p = line;
for (i = 0; i < num; ++i)
{
if (i == 8)
*p++ = ' ';
sprintf(p, " %02x", buf[i]);
p += 3;
}
*p = 0;
DWC_PRINT("%6x: %s\n", start, line);
buf += num;
start += num;
length -= num;
}
}
#else
static inline void dump_msg(const u8 *buf, unsigned int length)
{
}
#endif
/**
* This function writes a packet into the Tx FIFO associated with the
* EP. For non-periodic EPs the non-periodic Tx FIFO is written. For
* periodic EPs the periodic Tx FIFO associated with the EP is written
* with all packets for the next micro-frame.
*
* @param core_if Programming view of DWC_otg controller.
* @param ep The EP to write packet for.
* @param dma Indicates if DMA is being used.
*/
void dwc_otg_ep_write_packet(dwc_otg_core_if_t *core_if, dwc_ep_t *ep, int dma)
{
/**
* The buffer is padded to DWORD on a per packet basis in
* slave/dma mode if the MPS is not DWORD aligned. The last
* packet, if short, is also padded to a multiple of DWORD.
*
* ep->xfer_buff always starts DWORD aligned in memory and is a
* multiple of DWORD in length
*
* ep->xfer_len can be any number of bytes
*
* ep->xfer_count is a multiple of ep->maxpacket until the last
* packet
*
* FIFO access is DWORD */
uint32_t i;
uint32_t byte_count;
uint32_t dword_count;
uint32_t *fifo;
uint32_t *data_buff = (uint32_t *)ep->xfer_buff;
DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, ep);
if (ep->xfer_count >= ep->xfer_len) {
DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num);
return;
}
/* Find the byte length of the packet either short packet or MPS */
if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) {
byte_count = ep->xfer_len - ep->xfer_count;
}
else {
byte_count = ep->maxpacket;
}
/* Find the DWORD length, padded by extra bytes as neccessary if MPS
* is not a multiple of DWORD */
dword_count = (byte_count + 3) / 4;
#ifdef VERBOSE
dump_msg(ep->xfer_buff, byte_count);
#endif
/**@todo NGS Where are the Periodic Tx FIFO addresses
* intialized? What should this be? */
fifo = core_if->data_fifo[ep->num];
DWC_DEBUGPL((DBG_PCDV|DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", fifo, data_buff, *data_buff, byte_count);
if (!dma) {
for (i=0; i<dword_count; i++, data_buff++) {
dwc_write_reg32(fifo, *data_buff);
}
}
ep->xfer_count += byte_count;
ep->xfer_buff += byte_count;
ep->dma_addr += byte_count;
}
/**
* Set the EP STALL.
*
* @param core_if Programming view of DWC_otg controller.
* @param ep The EP to set the stall on.
*/
void dwc_otg_ep_set_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
depctl_data_t depctl;
volatile uint32_t *depctl_addr;
DWC_DEBUGPL(DBG_PCDV, "%s ep%d-%s1\n", __func__, ep->num,
(ep->is_in?"IN":"OUT"));
DWC_PRINT("%s ep%d-%s\n", __func__, ep->num,
(ep->is_in?"in":"out"));
if (ep->is_in == 1) {
depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
depctl.d32 = dwc_read_reg32(depctl_addr);
/* set the disable and stall bits */
#if 0
//epdis is set here but not cleared at latter dwc_otg_ep_clear_stall,
//which cause the testusb item 13 failed(Host:pc, device: otg device)
if (depctl.b.epena) {
depctl.b.epdis = 1;
}
#endif
depctl.b.stall = 1;
dwc_write_reg32(depctl_addr, depctl.d32);
}
else {
depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
depctl.d32 = dwc_read_reg32(depctl_addr);
/* set the stall bit */
depctl.b.stall = 1;
dwc_write_reg32(depctl_addr, depctl.d32);
}
DWC_DEBUGPL(DBG_PCDV,"%s: DEPCTL(%.8x)=%0x\n",__func__,(u32)depctl_addr,dwc_read_reg32(depctl_addr));
return;
}
/**
* Clear the EP STALL.
*
* @param core_if Programming view of DWC_otg controller.
* @param ep The EP to clear stall from.
*/
void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
depctl_data_t depctl;
volatile uint32_t *depctl_addr;
DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
(ep->is_in?"IN":"OUT"));
if (ep->is_in == 1) {
depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
}
else {
depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
}
depctl.d32 = dwc_read_reg32(depctl_addr);
/* clear the stall bits */
depctl.b.stall = 0;
/*
* USB Spec 9.4.5: For endpoints using data toggle, regardless
* of whether an endpoint has the Halt feature set, a
* ClearFeature(ENDPOINT_HALT) request always results in the
* data toggle being reinitialized to DATA0.
*/
if (ep->type == DWC_OTG_EP_TYPE_INTR ||
ep->type == DWC_OTG_EP_TYPE_BULK) {
depctl.b.setd0pid = 1; /* DATA0 */
}
dwc_write_reg32(depctl_addr, depctl.d32);
DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr));
return;
}
/**
* This function reads a packet from the Rx FIFO into the destination
* buffer. To read SETUP data use dwc_otg_read_setup_packet.
*
* @param core_if Programming view of DWC_otg controller.
* @param dest Destination buffer for the packet.
* @param bytes Number of bytes to copy to the destination.
*/
void dwc_otg_read_packet(dwc_otg_core_if_t *core_if,
uint8_t *dest,
uint16_t bytes)
{
int i;
int word_count = (bytes + 3) / 4;
volatile uint32_t *fifo = core_if->data_fifo[0];
uint32_t *data_buff = (uint32_t *)dest;
/**
* @todo Account for the case where _dest is not dword aligned. This
* requires reading data from the FIFO into a uint32_t temp buffer,
* then moving it into the data buffer.
*/
DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__,
core_if, dest, bytes);
for (i=0; i<word_count; i++, data_buff++)
{
*data_buff = dwc_read_reg32(fifo);
}
return;
}
/**
* This functions reads the device registers and prints them
*
* @param core_if Programming view of DWC_otg controller.
*/
void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *core_if)
{
int i;
volatile uint32_t *addr;
DWC_PRINT("Device Global Registers\n");
addr=&core_if->dev_if->dev_global_regs->dcfg;
DWC_PRINT("DCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->dev_if->dev_global_regs->dctl;
DWC_PRINT("DCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->dev_if->dev_global_regs->dsts;
DWC_PRINT("DSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->dev_if->dev_global_regs->diepmsk;
DWC_PRINT("DIEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->dev_if->dev_global_regs->doepmsk;
DWC_PRINT("DOEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->dev_if->dev_global_regs->daint;
DWC_PRINT("DAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->dev_if->dev_global_regs->daintmsk;
DWC_PRINT("DAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->dev_if->dev_global_regs->dtknqr1;
DWC_PRINT("DTKNQR1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
if (core_if->hwcfg2.b.dev_token_q_depth > 6) {
addr=&core_if->dev_if->dev_global_regs->dtknqr2;
DWC_PRINT("DTKNQR2 @0x%08X : 0x%08X\n",
(uint32_t)addr,dwc_read_reg32(addr));
}
addr=&core_if->dev_if->dev_global_regs->dvbusdis;
DWC_PRINT("DVBUSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->dev_if->dev_global_regs->dvbuspulse;
DWC_PRINT("DVBUSPULSE @0x%08X : 0x%08X\n",
(uint32_t)addr,dwc_read_reg32(addr));
if (core_if->hwcfg2.b.dev_token_q_depth > 14) {
addr=&core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
DWC_PRINT("DTKNQR3_DTHRCTL @0x%08X : 0x%08X\n",
(uint32_t)addr, dwc_read_reg32(addr));
}
/*
if (core_if->hwcfg2.b.dev_token_q_depth > 22) {
addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
DWC_PRINT("DTKNQR4 @0x%08X : 0x%08X\n",
(uint32_t)addr, dwc_read_reg32(addr));
}
*/
addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
DWC_PRINT("FIFOEMPMSK @0x%08X : 0x%08X\n", (uint32_t)addr, dwc_read_reg32(addr));
addr=&core_if->dev_if->dev_global_regs->deachint;
DWC_PRINT("DEACHINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->dev_if->dev_global_regs->deachintmsk;
DWC_PRINT("DEACHINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
addr=&core_if->dev_if->dev_global_regs->diepeachintmsk[i];
DWC_PRINT("DIEPEACHINTMSK[%d] @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
}
for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
addr=&core_if->dev_if->dev_global_regs->doepeachintmsk[i];
DWC_PRINT("DOEPEACHINTMSK[%d] @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr));
}
for (i=0; i<= core_if->dev_if->num_in_eps; i++) {
DWC_PRINT("Device IN EP %d Registers\n", i);
addr=&core_if->dev_if->in_ep_regs[i]->diepctl;
DWC_PRINT("DIEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->dev_if->in_ep_regs[i]->diepint;
DWC_PRINT("DIEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->dev_if->in_ep_regs[i]->dieptsiz;
DWC_PRINT("DIETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->dev_if->in_ep_regs[i]->diepdma;
DWC_PRINT("DIEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->dev_if->in_ep_regs[i]->dtxfsts;
DWC_PRINT("DTXFSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
//reading depdmab in non desc dma mode would halt the ahb bus...
if(core_if->dma_desc_enable){
addr=&core_if->dev_if->in_ep_regs[i]->diepdmab;
DWC_PRINT("DIEPDMAB @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
}
}
for (i=0; i<= core_if->dev_if->num_out_eps; i++) {
DWC_PRINT("Device OUT EP %d Registers\n", i);
addr=&core_if->dev_if->out_ep_regs[i]->doepctl;
DWC_PRINT("DOEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->dev_if->out_ep_regs[i]->doepfn;
DWC_PRINT("DOEPFN @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->dev_if->out_ep_regs[i]->doepint;
DWC_PRINT("DOEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->dev_if->out_ep_regs[i]->doeptsiz;
DWC_PRINT("DOETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->dev_if->out_ep_regs[i]->doepdma;
DWC_PRINT("DOEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
//reading depdmab in non desc dma mode would halt the ahb bus...
if(core_if->dma_desc_enable){
addr=&core_if->dev_if->out_ep_regs[i]->doepdmab;
DWC_PRINT("DOEPDMAB @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
}
}
return;
}
/**
* This functions reads the SPRAM and prints its content
*
* @param core_if Programming view of DWC_otg controller.
*/
void dwc_otg_dump_spram(dwc_otg_core_if_t *core_if)
{
volatile uint8_t *addr, *start_addr, *end_addr;
DWC_PRINT("SPRAM Data:\n");
start_addr = (void*)core_if->core_global_regs;
DWC_PRINT("Base Address: 0x%8X\n", (uint32_t)start_addr);
start_addr += 0x00028000;
end_addr=(void*)core_if->core_global_regs;
end_addr += 0x000280e0;
for(addr = start_addr; addr < end_addr; addr+=16)
{
DWC_PRINT("0x%8X:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", (uint32_t)addr,
addr[0],
addr[1],
addr[2],
addr[3],
addr[4],
addr[5],
addr[6],
addr[7],
addr[8],
addr[9],
addr[10],
addr[11],
addr[12],
addr[13],
addr[14],
addr[15]
);
}
return;
}
/**
* This function reads the host registers and prints them
*
* @param core_if Programming view of DWC_otg controller.
*/
void dwc_otg_dump_host_registers(dwc_otg_core_if_t *core_if)
{
int i;
volatile uint32_t *addr;
DWC_PRINT("Host Global Registers\n");
addr=&core_if->host_if->host_global_regs->hcfg;
DWC_PRINT("HCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->host_if->host_global_regs->hfir;
DWC_PRINT("HFIR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->host_if->host_global_regs->hfnum;
DWC_PRINT("HFNUM @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->host_if->host_global_regs->hptxsts;
DWC_PRINT("HPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->host_if->host_global_regs->haint;
DWC_PRINT("HAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->host_if->host_global_regs->haintmsk;
DWC_PRINT("HAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=core_if->host_if->hprt0;
DWC_PRINT("HPRT0 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
for (i=0; i<core_if->core_params->host_channels; i++)
{
DWC_PRINT("Host Channel %d Specific Registers\n", i);
addr=&core_if->host_if->hc_regs[i]->hcchar;
DWC_PRINT("HCCHAR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->host_if->hc_regs[i]->hcsplt;
DWC_PRINT("HCSPLT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->host_if->hc_regs[i]->hcint;
DWC_PRINT("HCINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->host_if->hc_regs[i]->hcintmsk;
DWC_PRINT("HCINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->host_if->hc_regs[i]->hctsiz;
DWC_PRINT("HCTSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->host_if->hc_regs[i]->hcdma;
DWC_PRINT("HCDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
}
return;
}
/**
* This function reads the core global registers and prints them
*
* @param core_if Programming view of DWC_otg controller.
*/
void dwc_otg_dump_global_registers(dwc_otg_core_if_t *core_if)
{
int i,size;
char* str;
volatile uint32_t *addr;
DWC_PRINT("Core Global Registers\n");
addr=&core_if->core_global_regs->gotgctl;
DWC_PRINT("GOTGCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->gotgint;
DWC_PRINT("GOTGINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->gahbcfg;
DWC_PRINT("GAHBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->gusbcfg;
DWC_PRINT("GUSBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->grstctl;
DWC_PRINT("GRSTCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->gintsts;
DWC_PRINT("GINTSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->gintmsk;
DWC_PRINT("GINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->grxstsr;
DWC_PRINT("GRXSTSR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
//addr=&core_if->core_global_regs->grxstsp;
//DWC_PRINT("GRXSTSP @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->grxfsiz;
DWC_PRINT("GRXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->gnptxfsiz;
DWC_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->gnptxsts;
DWC_PRINT("GNPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->gi2cctl;
DWC_PRINT("GI2CCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->gpvndctl;
DWC_PRINT("GPVNDCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->ggpio;
DWC_PRINT("GGPIO @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->guid;
DWC_PRINT("GUID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->gsnpsid;
DWC_PRINT("GSNPSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->ghwcfg1;
DWC_PRINT("GHWCFG1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->ghwcfg2;
DWC_PRINT("GHWCFG2 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->ghwcfg3;
DWC_PRINT("GHWCFG3 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->ghwcfg4;
DWC_PRINT("GHWCFG4 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
addr=&core_if->core_global_regs->hptxfsiz;
DWC_PRINT("HPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr));
size=(core_if->hwcfg4.b.ded_fifo_en)?
core_if->hwcfg4.b.num_in_eps:core_if->hwcfg4.b.num_dev_perio_in_ep;
str=(core_if->hwcfg4.b.ded_fifo_en)?"DIEPTXF":"DPTXFSIZ";
for (i=0; i<size; i++)
{
addr=&core_if->core_global_regs->dptxfsiz_dieptxf[i];
DWC_PRINT("%s[%d] @0x%08X : 0x%08X\n",str,i,(uint32_t)addr,dwc_read_reg32(addr));
}
}
/**
* Flush a Tx FIFO.
*
* @param core_if Programming view of DWC_otg controller.
* @param num Tx FIFO to flush.
*/
void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t *core_if,
const int num)
{
dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
volatile grstctl_t greset = { .d32 = 0};
int count = 0;
DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", num);
greset.b.txfflsh = 1;
greset.b.txfnum = num;
dwc_write_reg32(&global_regs->grstctl, greset.d32);
do {
greset.d32 = dwc_read_reg32(&global_regs->grstctl);
if (++count > 10000) {
DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
__func__, greset.d32,
dwc_read_reg32(&global_regs->gnptxsts));
break;
}
}
while (greset.b.txfflsh == 1);
/* Wait for 3 PHY Clocks*/
UDELAY(1);
}
/**
* Flush Rx FIFO.
*
* @param core_if Programming view of DWC_otg controller.
*/
void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t *core_if)
{
dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
volatile grstctl_t greset = { .d32 = 0};
int count = 0;
DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__);
/*
*
*/
greset.b.rxfflsh = 1;
dwc_write_reg32(&global_regs->grstctl, greset.d32);
do {
greset.d32 = dwc_read_reg32(&global_regs->grstctl);
if (++count > 10000) {
DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__,
greset.d32);
break;
}
}
while (greset.b.rxfflsh == 1);
/* Wait for 3 PHY Clocks*/
UDELAY(1);
}
/**
* Do core a soft reset of the core. Be careful with this because it
* resets all the internal state machines of the core.
*/
void dwc_otg_core_reset(dwc_otg_core_if_t *core_if)
{
dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
volatile grstctl_t greset = { .d32 = 0};
int count = 0;
DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
/* Wait for AHB master IDLE state. */
do {
UDELAY(10);
greset.d32 = dwc_read_reg32(&global_regs->grstctl);
if (++count > 100000) {
DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__,
greset.d32);
return;
}
}
while (greset.b.ahbidle == 0);
/* Core Soft Reset */
count = 0;
greset.b.csftrst = 1;
dwc_write_reg32(&global_regs->grstctl, greset.d32);
do {
greset.d32 = dwc_read_reg32(&global_regs->grstctl);
if (++count > 10000) {
DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__,
greset.d32);
break;
}
}
while (greset.b.csftrst == 1);
/* Wait for 3 PHY Clocks*/
MDELAY(100);
DWC_DEBUGPL(DBG_CILV, "GINTSTS=%.8x\n", dwc_read_reg32(&global_regs->gintsts));
DWC_DEBUGPL(DBG_CILV, "GINTSTS=%.8x\n", dwc_read_reg32(&global_regs->gintsts));
DWC_DEBUGPL(DBG_CILV, "GINTSTS=%.8x\n", dwc_read_reg32(&global_regs->gintsts));
}
/**
* Register HCD callbacks. The callbacks are used to start and stop
* the HCD for interrupt processing.
*
* @param core_if Programming view of DWC_otg controller.
* @param cb the HCD callback structure.
* @param p pointer to be passed to callback function (usb_hcd*).
*/
void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t *core_if,
dwc_otg_cil_callbacks_t *cb,
void *p)
{
core_if->hcd_cb = cb;
cb->p = p;
}
/**
* Register PCD callbacks. The callbacks are used to start and stop
* the PCD for interrupt processing.
*
* @param core_if Programming view of DWC_otg controller.
* @param cb the PCD callback structure.
* @param p pointer to be passed to callback function (pcd*).
*/
void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t *core_if,
dwc_otg_cil_callbacks_t *cb,
void *p)
{
core_if->pcd_cb = cb;
cb->p = p;
}
#ifdef DWC_EN_ISOC
/**
* This function writes isoc data per 1 (micro)frame into tx fifo
*
* @param core_if Programming view of DWC_otg controller.
* @param ep The EP to start the transfer on.
*
*/
void write_isoc_frame_data(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
dwc_otg_dev_in_ep_regs_t *ep_regs;
dtxfsts_data_t txstatus = {.d32 = 0};
uint32_t len = 0;
uint32_t dwords;
ep->xfer_len = ep->data_per_frame;
ep->xfer_count = 0;
ep_regs = core_if->dev_if->in_ep_regs[ep->num];
len = ep->xfer_len - ep->xfer_count;
if (len > ep->maxpacket) {
len = ep->maxpacket;
}
dwords = (len + 3)/4;
/* While there is space in the queue and space in the FIFO and
* More data to tranfer, Write packets to the Tx FIFO */
txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",ep->num,txstatus.d32);
while (txstatus.b.txfspcavail > dwords &&
ep->xfer_count < ep->xfer_len &&
ep->xfer_len != 0) {
/* Write the FIFO */
dwc_otg_ep_write_packet(core_if, ep, 0);
len = ep->xfer_len - ep->xfer_count;
if (len > ep->maxpacket) {
len = ep->maxpacket;
}
dwords = (len + 3)/4;
txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32);
}
}
/**
* This function initializes a descriptor chain for Isochronous transfer
*
* @param core_if Programming view of DWC_otg controller.
* @param ep The EP to start the transfer on.
*
*/
void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
{
deptsiz_data_t deptsiz = { .d32 = 0 };
depctl_data_t depctl = { .d32 = 0 };
dsts_data_t dsts = { .d32 = 0 };
volatile uint32_t *addr;
if(ep->is_in) {
addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
} else {
addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
}
ep->xfer_len = ep->data_per_frame;
ep->xfer_count = 0;
ep->xfer_buff = ep->cur_pkt_addr;
ep->dma_addr = ep->cur_pkt_dma_addr;
if(ep->is_in) {
/* Program the transfer size and packet count
* as follows: xfersize = N * maxpacket +
* short_packet pktcnt = N + (short_packet
* exist ? 1 : 0)
*/
deptsiz.b.xfersize = ep->xfer_len;
deptsiz.b.pktcnt =
(ep->xfer_len - 1 + ep->maxpacket) /
ep->maxpacket;
deptsiz.b.mc = deptsiz.b.pktcnt;
dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32);
/* Write the DMA register */
if (core_if->dma_enable) {
dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr);
}
} else {
deptsiz.b.pktcnt =
(ep->xfer_len + (ep->maxpacket - 1)) /
ep->maxpacket;
deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
if (core_if->dma_enable) {
dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma),
(uint32_t)ep->dma_addr);
}
}
/** Enable endpoint, clear nak */
depctl.d32 = 0;
if(ep->bInterval == 1) {
dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
ep->next_frame = dsts.b.soffn + ep->bInterval;
if(ep->next_frame & 0x1) {
depctl.b.setd1pid = 1;
} else {
depctl.b.setd0pid = 1;
}
} else {
ep->next_frame += ep->bInterval;
if(ep->next_frame & 0x1) {
depctl.b.setd1pid = 1;
} else {
depctl.b.setd0pid = 1;
}
}
depctl.b.epena = 1;
depctl.b.cnak = 1;
dwc_modify_reg32(addr, 0, depctl.d32);
depctl.d32 = dwc_read_reg32(addr);
if(ep->is_in && core_if->dma_enable == 0) {
write_isoc_frame_data(core_if, ep);
}
}
#endif //DWC_EN_ISOC