openwrtv3/target/linux/generic/pending-4.9/831-ledtrig_netdev.patch

75 lines
2.5 KiB
Diff
Raw Normal View History

usb: Remove annoying warning about bogus URB When USB Wi-Fi dongle based on Atheros AR9271 is connected to OHCI (USB 1.1) controller following warnings flood debug console: ------------------------>8--------------------------- usb 1-1: new full-speed USB device number 2 using ohci-platform usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G W 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d2 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G W 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d3 ]--- ... ------------------------>8--------------------------- With removed warning Wi-Fi dongle works properly. Even though this is not the best solution it gets us a working Wireless AP. Anyways new discussion was started in linux-usb mailing list to find a proper solution instead of that hack. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-07-05 12:42:21 +00:00
From: Alexey Brodkin <abrodkin@synopsys.com>
Subject: usb: Remove annoying warning about bogus URB
usb: Remove annoying warning about bogus URB When USB Wi-Fi dongle based on Atheros AR9271 is connected to OHCI (USB 1.1) controller following warnings flood debug console: ------------------------>8--------------------------- usb 1-1: new full-speed USB device number 2 using ohci-platform usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G W 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d2 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G W 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d3 ]--- ... ------------------------>8--------------------------- With removed warning Wi-Fi dongle works properly. Even though this is not the best solution it gets us a working Wireless AP. Anyways new discussion was started in linux-usb mailing list to find a proper solution instead of that hack. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-07-05 12:42:21 +00:00
When ath9k-htc Wi-Fi dongle is used with generic OHCI controller
infinite stream of warnings appears in debug console like this:
-------------------------->8----------------------
usb 1-1: new full-speed USB device number 2 using ohci-platform
usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size:
51008
------------[ cut here ]------------
WARNING: CPU: 0 PID: 19 at drivers/usb/core/urb.c:449
usb_submit_urb+0x1b4/0x498()
usb 1-1: BOGUS urb xfer, pipe 1 != type 3
Modules linked in:
CPU: 0 PID: 19 Comm: kworker/0:1 Not tainted
4.4.0-rc4-00017-g00e2d79-dirty #3
Workqueue: events request_firmware_work_func
Stack Trace:
arc_unwind_core.constprop.1+0xa4/0x110
usb: Remove annoying warning about bogus URB When USB Wi-Fi dongle based on Atheros AR9271 is connected to OHCI (USB 1.1) controller following warnings flood debug console: ------------------------>8--------------------------- usb 1-1: new full-speed USB device number 2 using ohci-platform usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G W 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d2 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G W 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d3 ]--- ... ------------------------>8--------------------------- With removed warning Wi-Fi dongle works properly. Even though this is not the best solution it gets us a working Wireless AP. Anyways new discussion was started in linux-usb mailing list to find a proper solution instead of that hack. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-07-05 12:42:21 +00:00
---[ end trace 649ef8c342817fc2 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 19 at drivers/usb/core/urb.c:449
usb_submit_urb+0x1b4/0x498()
usb 1-1: BOGUS urb xfer, pipe 1 != type 3
Modules linked in:
CPU: 0 PID: 19 Comm: kworker/0:1 Tainted: G W
4.4.0-rc4-00017-g00e2d79-dirty #3
Workqueue: events request_firmware_work_func
Stack Trace:
arc_unwind_core.constprop.1+0xa4/0x110
usb: Remove annoying warning about bogus URB When USB Wi-Fi dongle based on Atheros AR9271 is connected to OHCI (USB 1.1) controller following warnings flood debug console: ------------------------>8--------------------------- usb 1-1: new full-speed USB device number 2 using ohci-platform usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G W 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d2 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G W 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d3 ]--- ... ------------------------>8--------------------------- With removed warning Wi-Fi dongle works properly. Even though this is not the best solution it gets us a working Wireless AP. Anyways new discussion was started in linux-usb mailing list to find a proper solution instead of that hack. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-07-05 12:42:21 +00:00
---[ end trace 649ef8c342817fc3 ]---
------------[ cut here ]------------
-------------------------->8----------------------
There're some discussions in mailing lists proposing to disable
that particular check alltogether and magically all seem to work
fine with muted warning.
Anyways new thread on that regard could be found here:
http://lists.infradead.org/pipermail/linux-snps-arc/2016-July/001310.html
Let's see what comes out of that new discussion, hopefully patching
of generic USB stuff won't be required then.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
---
drivers/leds/Makefile | 1 +
drivers/leds/trigger/Kconfig | 7 +++++++
2 files changed, 8 insertions(+)
usb: Remove annoying warning about bogus URB When USB Wi-Fi dongle based on Atheros AR9271 is connected to OHCI (USB 1.1) controller following warnings flood debug console: ------------------------>8--------------------------- usb 1-1: new full-speed USB device number 2 using ohci-platform usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G W 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d2 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G W 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d3 ]--- ... ------------------------>8--------------------------- With removed warning Wi-Fi dongle works properly. Even though this is not the best solution it gets us a working Wireless AP. Anyways new discussion was started in linux-usb mailing list to find a proper solution instead of that hack. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-07-05 12:42:21 +00:00
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -77,3 +77,4 @@ obj-$(CONFIG_LEDS_DAC124S085) += leds-d
usb: Remove annoying warning about bogus URB When USB Wi-Fi dongle based on Atheros AR9271 is connected to OHCI (USB 1.1) controller following warnings flood debug console: ------------------------>8--------------------------- usb 1-1: new full-speed USB device number 2 using ohci-platform usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G W 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d2 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404 usb 1-1: BOGUS urb xfer, pipe 1 != type 3 Modules linked in: CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G W 4.6.3 #10 Workqueue: events request_firmware_work_func Stack Trace: arc_unwind_core.constprop.1+0x94/0x10c ---[ end trace 2249b79eac9991d3 ]--- ... ------------------------>8--------------------------- With removed warning Wi-Fi dongle works properly. Even though this is not the best solution it gets us a working Wireless AP. Anyways new discussion was started in linux-usb mailing list to find a proper solution instead of that hack. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-07-05 12:42:21 +00:00
# LED Triggers
obj-$(CONFIG_LEDS_TRIGGERS) += trigger/
+obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
--- a/drivers/leds/trigger/Kconfig
+++ b/drivers/leds/trigger/Kconfig
@@ -126,4 +126,11 @@ config LEDS_TRIGGER_PANIC
a different trigger.
If unsure, say Y.
+config LEDS_TRIGGER_NETDEV
+ tristate "LED Netdev Trigger"
+ depends on NET && LEDS_TRIGGERS
+ help
+ This allows LEDs to be controlled by network device activity.
+ If unsure, say Y.
+
endif # LEDS_TRIGGERS