openwrtv3/target/linux/ramips/dts/AR725W.dts

117 lines
1.7 KiB
Text
Raw Normal View History

/dts-v1/;
#include "rt2880.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "airlink101,ar725w", "ralink,rt2880-soc";
model = "Airlink101 AR725W";
cfi@bdc00000 {
compatible = "cfi-flash";
reg = <0xbc400000 0x800000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
u-boot@0 {
reg = <0x0 0x30000>;
label = "u-boot";
read-only;
};
u-boot-env@30000 {
reg = <0x30000 0x10000>;
label = "u-boot-env";
};
factory: factory@40000 {
reg = <0x40000 0x10000>;
label = "factory";
read-only;
};
firmware@50000 {
reg = <0x50000 0x3B0000>;
label = "firmware";
};
};
gpio-leds {
compatible = "gpio-leds";
status {
label = "ar725w:green:power";
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
};
wpsred {
label = "ar725w:red:wps";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
wpsblue {
label = "ar725w:blue:wps";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&gpio0 {
status = "okay";
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "spi", "uartlite";
ralink,function = "gpio";
};
};
};
&ethernet {
status = "okay";
mtd-mac-address = <&factory 0x4>;
port@0 {
phy-handle = <&phy0>;
phy-mode = "mii";
};
mdio-bus {
status = "okay";
phy0: ethernet-phy@0 {
phy-mode = "mii";
reg = <0>;
};
};
};
&wmac {
status = "okay";
ralink,mtd-eeprom = <&factory 0>;
};