openwrtv3/target/linux/brcm2708/patches-3.14/0053-Move-GPIO-setup-to-hw_params.patch

102 lines
2.9 KiB
Diff
Raw Normal View History

From 3eae00b73609f4e5a19260bfa4ca9021f295c0af Mon Sep 17 00:00:00 2001
From: Gordon Hollingworth <gordon@holliweb.co.uk>
Date: Fri, 2 May 2014 16:13:59 +0100
Subject: [PATCH 53/54] Move GPIO setup to hw_params.
This is used to stop the I2S driver from breaking
the GPIO setup for other uses of the PCM interface
---
sound/soc/bcm/bcm2708-i2s.c | 55 +++++++++++++++++++++++----------------------
1 file changed, 28 insertions(+), 27 deletions(-)
diff --git a/sound/soc/bcm/bcm2708-i2s.c b/sound/soc/bcm/bcm2708-i2s.c
index b25e158..9976571 100644
--- a/sound/soc/bcm/bcm2708-i2s.c
+++ b/sound/soc/bcm/bcm2708-i2s.c
@@ -305,6 +305,31 @@ static int bcm2708_i2s_set_dai_bclk_ratio(struct snd_soc_dai *dai,
return 0;
}
+
+static void bcm2708_i2s_setup_gpio(void)
+{
+ /*
+ * This is the common way to handle the GPIO pins for
+ * the Raspberry Pi.
+ * TODO Better way would be to handle
+ * this in the device tree!
+ */
+#define INP_GPIO(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3))
+#define SET_GPIO_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3))
+
+ unsigned int *gpio;
+ int pin;
+ gpio = ioremap(GPIO_BASE, SZ_16K);
+
+ /* SPI is on GPIO 7..11 */
+ for (pin = 28; pin <= 31; pin++) {
+ INP_GPIO(pin); /* set mode to GPIO input first */
+ SET_GPIO_ALT(pin, 2); /* set mode to ALT 0 */
+ }
+#undef INP_GPIO
+#undef SET_GPIO_ALT
+}
+
static int bcm2708_i2s_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
@@ -334,6 +359,9 @@ static int bcm2708_i2s_hw_params(struct snd_pcm_substream *substream,
if (csreg & (BCM2708_I2S_TXON | BCM2708_I2S_RXON))
return 0;
+
+ bcm2708_i2s_setup_gpio();
+
/*
* Adjust the data length according to the format.
* We prefill the half frame length with an integer
@@ -790,31 +818,6 @@ static const struct snd_soc_component_driver bcm2708_i2s_component = {
.name = "bcm2708-i2s-comp",
};
-
-static void bcm2708_i2s_setup_gpio(void)
-{
- /*
- * This is the common way to handle the GPIO pins for
- * the Raspberry Pi.
- * TODO Better way would be to handle
- * this in the device tree!
- */
-#define INP_GPIO(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3))
-#define SET_GPIO_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3))
-
- unsigned int *gpio;
- int pin;
- gpio = ioremap(GPIO_BASE, SZ_16K);
-
- /* SPI is on GPIO 7..11 */
- for (pin = 28; pin <= 31; pin++) {
- INP_GPIO(pin); /* set mode to GPIO input first */
- SET_GPIO_ALT(pin, 2); /* set mode to ALT 0 */
- }
-#undef INP_GPIO
-#undef SET_GPIO_ALT
-}
-
static const struct snd_pcm_hardware bcm2708_pcm_hardware = {
.info = SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_JOINT_DUPLEX,
@@ -865,8 +868,6 @@ static int bcm2708_i2s_probe(struct platform_device *pdev)
if (IS_ERR(dev))
return PTR_ERR(dev);
- bcm2708_i2s_setup_gpio();
-
dev->i2s_regmap = regmap[0];
dev->clk_regmap = regmap[1];
--
1.9.1