KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/kirkwood/image/Makefile

140 lines
3.7 KiB
Makefile
Raw Normal View History

add preliminary Marvell Kirkwood support SVN-Revision: 15556
2009-05-02 12:48:42 +00:00
#
kirkwood: fix initramfs images Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38296
2013-10-03 02:50:02 +00:00
# Copyright (C) 2009-2013 OpenWrt.org
add preliminary Marvell Kirkwood support SVN-Revision: 15556
2009-05-02 12:48:42 +00:00
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
image: fix jffs2(_nand) image generation Variables dependend on JFFS2_BLOCKSIZE and NANDBLOCK_SIZE are used for template generation, so need to be present before inclusion of image.mk in target image Makefiles. So move all declarations to before any includes. Fixes: r42878 ("image.mk: clean up and parallelize mkfs calls") Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46564
2015-08-05 13:55:52 +00:00
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
KERNEL_LOADADDR:=0x8000
define Device/Default
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
PROFILES := Default
targets: add kernel image dependencies on device tree files Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48146
2016-01-06 18:39:06 +00:00
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
KERNEL := kernel-bin | append-dtb | uImage none
KERNEL_NAME := zImage
kirkwood: install kernel binaries into bin/ for use with external storage Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-23 12:38:20 +00:00
KERNEL_SUFFIX := -uImage
kirkwood: cleanup image build code Drop NAND_BLOCKSIZE, UBI_OPTS and UBIFS_OPTS. They are either used by not supported filesystems or by the legacy image build code. Add common used options/images to the default build code and override the options where necessary. Don't export the kernel image, it isn't required by any board. While at it, change the file extension for the sysupgrade images to bin. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-27 23:25:41 +00:00
KERNEL_IN_UBI := 1
kirkwood: add DEVICE_VAR KERNEL_IN_UBI for kernel as volume in ubi images depending on KERNEL_IN_UBI, the image.mk will create a ubi volume for the kernel Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49009
2016-03-14 17:06:08 +00:00
PAGESIZE := 2048
SUBPAGESIZE := 512
image: use k as unit suffix for blocksize Use k as unit suffix for kilobyte to have a the same unit regardless of the used filesystem. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-04 06:56:05 +00:00
BLOCKSIZE := 128k
kirkwood: cleanup image build code Drop NAND_BLOCKSIZE, UBI_OPTS and UBIFS_OPTS. They are either used by not supported filesystems or by the legacy image build code. Add common used options/images to the default build code and override the options where necessary. Don't export the kernel image, it isn't required by any board. While at it, change the file extension for the sysupgrade images to bin. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-27 23:25:41 +00:00
IMAGES := sysupgrade.bin factory.bin
kirkwood: use image metadata Append and enforce image metadata. Remove the device specific image checks, they are replaced by image metadata. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 08:22:45 +00:00
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
kirkwood: cleanup image build code Drop NAND_BLOCKSIZE, UBI_OPTS and UBIFS_OPTS. They are either used by not supported filesystems or by the legacy image build code. Add common used options/images to the default build code and override the options where necessary. Don't export the kernel image, it isn't required by any board. While at it, change the file extension for the sysupgrade images to bin. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-27 23:25:41 +00:00
IMAGE/factory.bin := append-ubi
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
kirkwood: clean up redundant variables in the image building code Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-19 14:38:25 +00:00
endef
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
define Device/seagate_dockstar
kirkwood: clean up redundant variables in the image building code Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-19 14:38:25 +00:00
DEVICE_DTS := kirkwood-dockstar
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
DEVICE_TITLE := Seagate FreeAgent Dockstar
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
BOARD_NAME := dockstar
SUPPORTED_DEVICES += dockstar
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
endef
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
TARGET_DEVICES += seagate_dockstar
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
define Device/seagate_goflexnet
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
DEVICE_TITLE := Seagate GoFlexNet
linux/kirkwood: migrate goflexhome/goflexnet to new ubi style Also using the new image build step format Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49013
2016-03-14 17:06:12 +00:00
DEVICE_DTS := kirkwood-goflexnet
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
BOARD_NAME := goflexnet
SUPPORTED_DEVICES += goflexnet
linux/kirkwood: migrate goflexhome/goflexnet to new ubi style Also using the new image build step format Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49013
2016-03-14 17:06:12 +00:00
endef
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
TARGET_DEVICES += seagate_goflexnet
linux/kirkwood: migrate goflexhome/goflexnet to new ubi style Also using the new image build step format Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49013
2016-03-14 17:06:12 +00:00
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
define Device/seagate_goflexhome
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
DEVICE_TITLE := Seagate GoFlexHome
linux/kirkwood: migrate goflexhome/goflexnet to new ubi style Also using the new image build step format Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49013
2016-03-14 17:06:12 +00:00
DEVICE_DTS := kirkwood-goflexhome
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
BOARD_NAME := goflexhome
SUPPORTED_DEVICES += goflexhome
linux/kirkwood: migrate goflexhome/goflexnet to new ubi style Also using the new image build step format Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49013
2016-03-14 17:06:12 +00:00
endef
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
TARGET_DEVICES += seagate_goflexhome
linux/kirkwood: migrate goflexhome/goflexnet to new ubi style Also using the new image build step format Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49013
2016-03-14 17:06:12 +00:00
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
define Device/linksys_audi
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
DEVICE_TITLE := Linksys EA3500 (Audi)
DEVICE_PACKAGES := kmod-mwl8k swconfig wpad-mini
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
DEVICE_DTS := kirkwood-linksys-audi
KERNEL_SIZE := 2624k
kirkwood: cleanup image build code Drop NAND_BLOCKSIZE, UBI_OPTS and UBIFS_OPTS. They are either used by not supported filesystems or by the legacy image build code. Add common used options/images to the default build code and override the options where necessary. Don't export the kernel image, it isn't required by any board. While at it, change the file extension for the sysupgrade images to bin. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-27 23:25:41 +00:00
KERNEL_IN_UBI := 0
kirkwood: only add UBI EOF markers for devices that need it Fixes issues where the second-stage u-boot already uses UBI. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:03:46 +00:00
UBINIZE_OPTS := -E 5
image: remove padding parameter from append-kernel/append-rootfs Using pad-to instead of passing the optional padding to append-kernel or append-rootfs. It could be that the value of a variable is passed. In case the variable is empty no error is thrown. Furthermore the purpose of the extra parameter is hard to get without reading the code. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-11 17:05:20 +00:00
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
BOARD_NAME := linksys-audi
SUPPORTED_DEVICES += linksys-audi
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
endef
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
TARGET_DEVICES += linksys_audi
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
define Device/linksys_viper
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
DEVICE_TITLE := Linksys E4200v2 / EA4500 (Viper)
DEVICE_PACKAGES := kmod-mwl8k swconfig wpad-mini
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
DEVICE_DTS := kirkwood-linksys-viper
KERNEL_SIZE := 2688k
kirkwood: cleanup image build code Drop NAND_BLOCKSIZE, UBI_OPTS and UBIFS_OPTS. They are either used by not supported filesystems or by the legacy image build code. Add common used options/images to the default build code and override the options where necessary. Don't export the kernel image, it isn't required by any board. While at it, change the file extension for the sysupgrade images to bin. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-27 23:25:41 +00:00
KERNEL_IN_UBI := 0
kirkwood: only add UBI EOF markers for devices that need it Fixes issues where the second-stage u-boot already uses UBI. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 13:03:46 +00:00
UBINIZE_OPTS := -E 5
image: remove padding parameter from append-kernel/append-rootfs Using pad-to instead of passing the optional padding to append-kernel or append-rootfs. It could be that the value of a variable is passed. In case the variable is empty no error is thrown. Furthermore the purpose of the extra parameter is hard to get without reading the code. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-11 17:05:20 +00:00
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
BOARD_NAME := linksys-viper
SUPPORTED_DEVICES += linksys-viper
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
endef
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
TARGET_DEVICES += linksys_viper
kirkwood: generate factory images for Linksys EA[34]500 This is done with the new image generation system and board names. It also generates a sysupgrade.tar image. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
define Device/iom_iconnect-1.1
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
DEVICE_TITLE := Iomega Iconnect
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 14:07:38 +00:00
DEVICE_DTS := kirkwood-iconnect
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
BOARD_NAME := iconnect
SUPPORTED_DEVICES += iconnect
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 14:07:38 +00:00
endef
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
TARGET_DEVICES += iom_iconnect-1.1
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 14:07:38 +00:00
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
define Device/zyxel_nsa310b
kirkwood: add ZyXEL NSA310b The ZyXEL NSA310 device is a Kirkwood based NAS: - SoC: Marvell 88F6702 1200Mhz - SDRAM memory: 256MB DDR2 400Mhz - Gigabit ethernet: Realtek (over pcie) - Flash memory: 128MB - 1 Power button - 1 Power LED (blue) - 5 Status LED (green/red) - 1 Copy/Sync button - 1 Reset button - 2 SATA II port (1 internal and 1 external) - 2 USB 2.0 ports (1 front and 1 back) - Smart fan The stock u-boot cannot read ubi so it should be replaced with the LEDE/OpenWRT's u-boot or with a u-boot from here https://github.com/mibodhi/u-boot-kirkwood This device's boot ROM supports "kwboot" tool (in mainline u-boot, built automatically if CONFIG_KIRKWOOD is declared) that sends an uboot image to the board over serial connection, it is very easy to unbrick. The stock bootloader can use usb and read from FAT filesystems, so the installation process is simple, place the uboot file on a USB flashdrive formatted as FAT (here it is "openwrt-kirkwood-nsa310.bin", then connect TTL to the board and write the following commands in the bootloader console: usb reset fatload usb 0 0x1000000 openwrt-kirkwood-nsa310.bin nand write 0x1000000 0x00000 0x100000 reset Now you are rebooting in the new u-boot, write this in its console to install the firmware: usb reset fatload usb 0 0x2000000 lede-kirkwood-nsa310b-squashfs-factory.bin nand erase.part ubi nand write 0x2000000 ubi 0x600000 If your firmware file is bigger than 6 MiBs you should write its size in hex instead of 0x600000 above, or remove that number entirely (it will take a while in this case). If you are using another uboot that can read ubi, set mtdparts like this mtdparts=mtdparts=orion_nand:0x00c0000(uboot),0x80000(uboot_env),0x7ec0000(ubi) And set your bootcmd to be like this bootcmd=run setenv bootargs; ubi part ubi; ubi read 0x800000 kernel; bootm 0x800000 Then you can install the firmware as described above. After you installed (or configured) the u-boot for booting the firmware, write the device's mac address in the ethaddr u-boot env. The MAC address is usually on a sticker under the device (one of the two codes is the serial), it should begin with "107BEF" as it is assigned to ZyXEL. write in the u-boot console (use your MAC address instead of the example) setenv ethaddr 10:7B:EF:00:00:00 saveenv to save the mac address in the u-boot. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-01-23 19:34:29 +00:00
DEVICE_TITLE := ZyXEL NSA310b
DEVICE_DTS := kirkwood-nsa310b
DEVICE_PACKAGES := kmod-r8169 kmod-gpio-button-hotplug kmod-hwmon-lm85
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
BOARD_NAME := nsa310b
kirkwood: add ZyXEL NSA310b The ZyXEL NSA310 device is a Kirkwood based NAS: - SoC: Marvell 88F6702 1200Mhz - SDRAM memory: 256MB DDR2 400Mhz - Gigabit ethernet: Realtek (over pcie) - Flash memory: 128MB - 1 Power button - 1 Power LED (blue) - 5 Status LED (green/red) - 1 Copy/Sync button - 1 Reset button - 2 SATA II port (1 internal and 1 external) - 2 USB 2.0 ports (1 front and 1 back) - Smart fan The stock u-boot cannot read ubi so it should be replaced with the LEDE/OpenWRT's u-boot or with a u-boot from here https://github.com/mibodhi/u-boot-kirkwood This device's boot ROM supports "kwboot" tool (in mainline u-boot, built automatically if CONFIG_KIRKWOOD is declared) that sends an uboot image to the board over serial connection, it is very easy to unbrick. The stock bootloader can use usb and read from FAT filesystems, so the installation process is simple, place the uboot file on a USB flashdrive formatted as FAT (here it is "openwrt-kirkwood-nsa310.bin", then connect TTL to the board and write the following commands in the bootloader console: usb reset fatload usb 0 0x1000000 openwrt-kirkwood-nsa310.bin nand write 0x1000000 0x00000 0x100000 reset Now you are rebooting in the new u-boot, write this in its console to install the firmware: usb reset fatload usb 0 0x2000000 lede-kirkwood-nsa310b-squashfs-factory.bin nand erase.part ubi nand write 0x2000000 ubi 0x600000 If your firmware file is bigger than 6 MiBs you should write its size in hex instead of 0x600000 above, or remove that number entirely (it will take a while in this case). If you are using another uboot that can read ubi, set mtdparts like this mtdparts=mtdparts=orion_nand:0x00c0000(uboot),0x80000(uboot_env),0x7ec0000(ubi) And set your bootcmd to be like this bootcmd=run setenv bootargs; ubi part ubi; ubi read 0x800000 kernel; bootm 0x800000 Then you can install the firmware as described above. After you installed (or configured) the u-boot for booting the firmware, write the device's mac address in the ethaddr u-boot env. The MAC address is usually on a sticker under the device (one of the two codes is the serial), it should begin with "107BEF" as it is assigned to ZyXEL. write in the u-boot console (use your MAC address instead of the example) setenv ethaddr 10:7B:EF:00:00:00 saveenv to save the mac address in the u-boot. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-01-23 19:34:29 +00:00
endef
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
TARGET_DEVICES += zyxel_nsa310b
kirkwood: add ZyXEL NSA310b The ZyXEL NSA310 device is a Kirkwood based NAS: - SoC: Marvell 88F6702 1200Mhz - SDRAM memory: 256MB DDR2 400Mhz - Gigabit ethernet: Realtek (over pcie) - Flash memory: 128MB - 1 Power button - 1 Power LED (blue) - 5 Status LED (green/red) - 1 Copy/Sync button - 1 Reset button - 2 SATA II port (1 internal and 1 external) - 2 USB 2.0 ports (1 front and 1 back) - Smart fan The stock u-boot cannot read ubi so it should be replaced with the LEDE/OpenWRT's u-boot or with a u-boot from here https://github.com/mibodhi/u-boot-kirkwood This device's boot ROM supports "kwboot" tool (in mainline u-boot, built automatically if CONFIG_KIRKWOOD is declared) that sends an uboot image to the board over serial connection, it is very easy to unbrick. The stock bootloader can use usb and read from FAT filesystems, so the installation process is simple, place the uboot file on a USB flashdrive formatted as FAT (here it is "openwrt-kirkwood-nsa310.bin", then connect TTL to the board and write the following commands in the bootloader console: usb reset fatload usb 0 0x1000000 openwrt-kirkwood-nsa310.bin nand write 0x1000000 0x00000 0x100000 reset Now you are rebooting in the new u-boot, write this in its console to install the firmware: usb reset fatload usb 0 0x2000000 lede-kirkwood-nsa310b-squashfs-factory.bin nand erase.part ubi nand write 0x2000000 ubi 0x600000 If your firmware file is bigger than 6 MiBs you should write its size in hex instead of 0x600000 above, or remove that number entirely (it will take a while in this case). If you are using another uboot that can read ubi, set mtdparts like this mtdparts=mtdparts=orion_nand:0x00c0000(uboot),0x80000(uboot_env),0x7ec0000(ubi) And set your bootcmd to be like this bootcmd=run setenv bootargs; ubi part ubi; ubi read 0x800000 kernel; bootm 0x800000 Then you can install the firmware as described above. After you installed (or configured) the u-boot for booting the firmware, write the device's mac address in the ethaddr u-boot env. The MAC address is usually on a sticker under the device (one of the two codes is the serial), it should begin with "107BEF" as it is assigned to ZyXEL. write in the u-boot console (use your MAC address instead of the example) setenv ethaddr 10:7B:EF:00:00:00 saveenv to save the mac address in the u-boot. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-01-23 19:34:29 +00:00
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
define Device/zyxel_nsa325
kirkwood: add ZyXEL NSA325 device This patch add ZyXEL NSA325 2-Bay Media Server The ZyXEL NSA325 device is a Kirkwood based NAS: - SoC: Marvell 88F6702 1600Mhz - SDRAM memory: 512MB DDR2 400Mhz - Gigabit ethernet: Marvell Alaska - Flash memory: 128MB - 1 Power button - 1 Power LED (blue) - 5 Status LED (green/red) - 1 Copy/Sync button - 1 Reset button - 2 SATA II ports (internal) - 2 USB 2.0 ports (back) - 1 USB 3.0 port (front) - Fan (fixed speed) - hardware watchdog in a mcu Basically a bigger, more powerful version of NSA310, installation is the same as they share the same flash layout. A notable difference is that there is a hardware watchdog in a mcu on the board, which is disabled by default in the LEDE u-boot. The watchdog is also disabled with a GPIO activation through raw register change when kwbooting or it would reset the board before the new uboot was transferred. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it> Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove dead code]
2017-02-06 10:40:52 +00:00
DEVICE_TITLE := ZyXEL NSA325 (v1 and v2)
DEVICE_DTS := kirkwood-nsa325
DEVICE_PACKAGES := kmod-gpio-button-hotplug kmod-rtc-pcf8563 kmod-usb3
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
BOARD_NAME := nsa325
kirkwood: add ZyXEL NSA325 device This patch add ZyXEL NSA325 2-Bay Media Server The ZyXEL NSA325 device is a Kirkwood based NAS: - SoC: Marvell 88F6702 1600Mhz - SDRAM memory: 512MB DDR2 400Mhz - Gigabit ethernet: Marvell Alaska - Flash memory: 128MB - 1 Power button - 1 Power LED (blue) - 5 Status LED (green/red) - 1 Copy/Sync button - 1 Reset button - 2 SATA II ports (internal) - 2 USB 2.0 ports (back) - 1 USB 3.0 port (front) - Fan (fixed speed) - hardware watchdog in a mcu Basically a bigger, more powerful version of NSA310, installation is the same as they share the same flash layout. A notable difference is that there is a hardware watchdog in a mcu on the board, which is disabled by default in the LEDE u-boot. The watchdog is also disabled with a GPIO activation through raw register change when kwbooting or it would reset the board before the new uboot was transferred. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it> Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove dead code]
2017-02-06 10:40:52 +00:00
endef
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
TARGET_DEVICES += zyxel_nsa325
kirkwood: add ZyXEL NSA325 device This patch add ZyXEL NSA325 2-Bay Media Server The ZyXEL NSA325 device is a Kirkwood based NAS: - SoC: Marvell 88F6702 1600Mhz - SDRAM memory: 512MB DDR2 400Mhz - Gigabit ethernet: Marvell Alaska - Flash memory: 128MB - 1 Power button - 1 Power LED (blue) - 5 Status LED (green/red) - 1 Copy/Sync button - 1 Reset button - 2 SATA II ports (internal) - 2 USB 2.0 ports (back) - 1 USB 3.0 port (front) - Fan (fixed speed) - hardware watchdog in a mcu Basically a bigger, more powerful version of NSA310, installation is the same as they share the same flash layout. A notable difference is that there is a hardware watchdog in a mcu on the board, which is disabled by default in the LEDE u-boot. The watchdog is also disabled with a GPIO activation through raw register change when kwbooting or it would reset the board before the new uboot was transferred. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it> Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove dead code]
2017-02-06 10:40:52 +00:00
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
define Device/cisco_on100
kirkwood: add support for Cisco ON100 The Cisco ON100 device is a Kirkwood based router: SoC: Marvell 88F6282 1600Mhz SDRAM memory: 512MB DDR3 1333Mhz Gigabit ethernet: 2x Marvell 88E1310 (over RGMII) Flash memory: 512MB 2 bi-colour status LEDs (green/red) 1 Reset button 1 USB 2.0 port (on back) 1 SDIO slot (on back) This commit adds a target profile of "Cisco Systems ON100" under the target system "Marvell Kirkwood". Flashing can be performed over tftp, once "dhcp" has been issued: tftpboot ${loadaddr} lede-kirkwood-on100-squashfs-factory.bin nand erase 0x0c0000 ${filesize} nand write ${loadaddr} 0x0c0000 ${filesize} Once flashed, set environment variables to boot: setenv bootcmd nand read \${loadaddr} 0x0c0000 0x540000\; setenv bootargs \; bootm saveenv Signed-off-by: Makoto Takeuchi <mak0@lxsys.co.uk>
2017-05-24 15:37:24 +00:00
DEVICE_TITLE := Cisco Systems ON100
DEVICE_DTS := kirkwood-on100
DEVICE_PACKAGES := kmod-i2c-mv64xxx
KERNEL_SIZE := 5376k
kirkwood: cleanup image build code Drop NAND_BLOCKSIZE, UBI_OPTS and UBIFS_OPTS. They are either used by not supported filesystems or by the legacy image build code. Add common used options/images to the default build code and override the options where necessary. Don't export the kernel image, it isn't required by any board. While at it, change the file extension for the sysupgrade images to bin. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-27 23:25:41 +00:00
KERNEL_IN_UBI := 0
kirkwood: add support for Cisco ON100 The Cisco ON100 device is a Kirkwood based router: SoC: Marvell 88F6282 1600Mhz SDRAM memory: 512MB DDR3 1333Mhz Gigabit ethernet: 2x Marvell 88E1310 (over RGMII) Flash memory: 512MB 2 bi-colour status LEDs (green/red) 1 Reset button 1 USB 2.0 port (on back) 1 SDIO slot (on back) This commit adds a target profile of "Cisco Systems ON100" under the target system "Marvell Kirkwood". Flashing can be performed over tftp, once "dhcp" has been issued: tftpboot ${loadaddr} lede-kirkwood-on100-squashfs-factory.bin nand erase 0x0c0000 ${filesize} nand write ${loadaddr} 0x0c0000 ${filesize} Once flashed, set environment variables to boot: setenv bootcmd nand read \${loadaddr} 0x0c0000 0x540000\; setenv bootargs \; bootm saveenv Signed-off-by: Makoto Takeuchi <mak0@lxsys.co.uk>
2017-05-24 15:37:24 +00:00
UBINIZE_OPTS := -E 5
kirkwood: cleanup image build code Drop NAND_BLOCKSIZE, UBI_OPTS and UBIFS_OPTS. They are either used by not supported filesystems or by the legacy image build code. Add common used options/images to the default build code and override the options where necessary. Don't export the kernel image, it isn't required by any board. While at it, change the file extension for the sysupgrade images to bin. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-27 23:25:41 +00:00
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
BOARD_NAME := on100
kirkwood: add support for Cisco ON100 The Cisco ON100 device is a Kirkwood based router: SoC: Marvell 88F6282 1600Mhz SDRAM memory: 512MB DDR3 1333Mhz Gigabit ethernet: 2x Marvell 88E1310 (over RGMII) Flash memory: 512MB 2 bi-colour status LEDs (green/red) 1 Reset button 1 USB 2.0 port (on back) 1 SDIO slot (on back) This commit adds a target profile of "Cisco Systems ON100" under the target system "Marvell Kirkwood". Flashing can be performed over tftp, once "dhcp" has been issued: tftpboot ${loadaddr} lede-kirkwood-on100-squashfs-factory.bin nand erase 0x0c0000 ${filesize} nand write ${loadaddr} 0x0c0000 ${filesize} Once flashed, set environment variables to boot: setenv bootcmd nand read \${loadaddr} 0x0c0000 0x540000\; setenv bootargs \; bootm saveenv Signed-off-by: Makoto Takeuchi <mak0@lxsys.co.uk>
2017-05-24 15:37:24 +00:00
endef
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
TARGET_DEVICES += cisco_on100
kirkwood: add support for Cisco ON100 The Cisco ON100 device is a Kirkwood based router: SoC: Marvell 88F6282 1600Mhz SDRAM memory: 512MB DDR3 1333Mhz Gigabit ethernet: 2x Marvell 88E1310 (over RGMII) Flash memory: 512MB 2 bi-colour status LEDs (green/red) 1 Reset button 1 USB 2.0 port (on back) 1 SDIO slot (on back) This commit adds a target profile of "Cisco Systems ON100" under the target system "Marvell Kirkwood". Flashing can be performed over tftp, once "dhcp" has been issued: tftpboot ${loadaddr} lede-kirkwood-on100-squashfs-factory.bin nand erase 0x0c0000 ${filesize} nand write ${loadaddr} 0x0c0000 ${filesize} Once flashed, set environment variables to boot: setenv bootcmd nand read \${loadaddr} 0x0c0000 0x540000\; setenv bootargs \; bootm saveenv Signed-off-by: Makoto Takeuchi <mak0@lxsys.co.uk>
2017-05-24 15:37:24 +00:00
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
define Device/cloudengines_pogoe02
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
DEVICE_TITLE := Cloud Engines Pogoplug E02
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 14:07:38 +00:00
DEVICE_DTS := kirkwood-pogo_e02
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
BOARD_NAME := pogo_e02
SUPPORTED_DEVICES += pogo_e02
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 14:07:38 +00:00
endef
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
TARGET_DEVICES += cloudengines_pogoe02
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 14:07:38 +00:00
kirkwood: add pogoplug v4 also known as POGO-V4-A3-02 or POGO-V4-A3-01 SoC: Marvell 88F6192 800Mhz SDRAM memory: 128MB Gigabit ethernet: 1 Marvell 88E1310 Flash memory: 128MB 2 status LEDs (one green one red) 1 "Eject" button on the back (used as "Reset" button) 1 USB 2.0 port (on upper side) 1 sata slot (power + data) for 2.5'' drives (upper side) 2 USB 3.0 ports from a controller on PCIe x1 of the SoC 1 full-size SDcard slot (fits a whole SD card into it) This device supports the (linux-only) kwboot tool to send a new uboot over serial console, so it is easy to unbrick in case the uboot is erased and the device won't boot. ----- Install instructions: ----- Since it's not possible to get ssh access to these devices, the only way to take control is to solder pins to get TTL serial access. Case can be opened by removing screws beneath two rubber feet at back of device, then lifting while prying the sides of the upper part out to unhook a latch on each side about 2/3rds of the way toward the front. Serial connection pins are those labeled "J11", left of SD as you face SD opening. Pins are (from left to right, i.e. the first in the list is the nearest to the SD slot) GND, Rx, Tx. Do not connect +V pin if you use a USB (self-powered) TTL-to-USB dongle. Any USB TTL-to-USB converter will work. Baud rate is 115200, parity "none", databits "8", flow control "none". Stock uboot is unable to read ubi partitions (nor usb) so we will replace it first with our uboot. Start a TFTP server at IP address 169.254.254.254, and place the uboot.kwb file in the folder of the server. Start the serial session and then power up the device. As soon as you see text on the serial start pressing random letter keys to stop the boot process. If you see something like the following line you can proceed: CE>> Otherwise if text is still scrolling by you missed the opportunity, pull the plug and try again. write printenv ethaddr The uboot will write something like this: ethaddr=00:50:43:00:02:02 This is the device's MAC address, also present in the sticker under the device. Write this down as we will need to add it in the new uboot configuration. Use the following commands to load the new uboot: tftp 0x20000 u-boot.kwb If the uboot confirms that the transfer was successful, then you can write it to flash with the following commands: nand erase 0 0x200000 nand write 0x20000 0 0x1c0000 if after the last command the uboot wrote "xxxx bytes written: OK" then it was written correctly and we can proceed. If it did not go well, try again or ask assistence in forums. Shutting down or rebooting at this time will brick the device, to unbrick it you will need to use the kwboot tool from a Linux PC or Virtual Machine. Now write: reset and press enter, the device will reboot and you should see again text scrolling by. Press a random key to stop it, and now you should see pogoplugv4> We now add the MAC address back, write: setenv ethaddr '00:50:43:00:02:02' Confirm that the uboot has understood by writing printenv ethaddr If all looks ok, save the setting with saveenv At this point the uboot is configured, and we only need to load the firmware in the flash memory. Follow the steps below in "Firmware recovery procedure". ---- Firmware recovery procedure ---- The new uboot allows easy recovery from a bad firmware upgrade where you can't access the device anymore over ssh or luci. Take a USB flash drive formatted as FAT32, and copy the initramfs image file in it (it will have "initramfs" in the file name), then rename it as "initramfs.bin". Insert the USB drive in the USB 2.0 port of the pogoplug (the port at the top). Power up the device, and wait for it to finish booting. The uboot should find and load the "initramfs.bin" from usb and if you are connected with serial you should see the linux kernel boot log (text scrolling by). Once it is done, press Enter and you will be greeted by the OpenWRT banner. If you were not connected with serial just wait a bit and, you will be able to access it with ssh or luci web interface (once you find its IP). The recovery "initramfs" images are run from RAM, so you will have to do a normal sysupgrade (firmware upgrade) to write a firmware image to flash memory. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2018-01-02 15:07:19 +00:00
define Device/cloudengines_pogoplugv4
DEVICE_TITLE := Cloud Engines Pogoplug V4
DEVICE_DTS := kirkwood-pogoplug-series-4
DEVICE_PACKAGES := kmod-usb3
endef
TARGET_DEVICES += cloudengines_pogoplugv4
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
define Device/raidsonic_ib-nas62x0
kirkwood: clean up profiles, move to image makefile Adds support for per-device rootfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:26:27 +00:00
DEVICE_TITLE := RaidSonic ICY BOX IB-NAS62x0
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 14:07:38 +00:00
DEVICE_DTS := kirkwood-ib62x0
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
BOARD_NAME := ib62x0
SUPPORTED_DEVICES += ib62x0
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 14:07:38 +00:00
endef
kirkwood: sync image filename with boardname Use <manufacturer>_<modelname> as image name. Use the BOARD_NAME variable to ensure that the former used boardname is still used as the subdirectory name for the sysupgrade-tar image, to not break sysupgrade from earlier versions. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-28 09:39:19 +00:00
TARGET_DEVICES += raidsonic_ib-nas62x0
kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code Update the correspoding u-boot configs to stop relying on kernel-in-rootfs, which was removed a while back Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 14:07:38 +00:00
add preliminary Marvell Kirkwood support SVN-Revision: 15556
2009-05-02 12:48:42 +00:00
$(eval $(call BuildImage))
Reference in a new issue Copy permalink