openwrtv3/package/boot/uboot-xburst/files/cpu/mips/jz_lcd.h

261 lines
6.1 KiB
C
Raw Normal View History

/*
* JzRISC lcd controller
*
* xiangfu liu <xiangfu.z@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __JZLCD_H__
#define __JZLCD_H__
#include <asm/io.h>
/*
* change u-boot macro to celinux macro
*/
/* Chip type */
#if defined(CONFIG_JZ4740)
#define CONFIG_MIPS_JZ4740 1
#endif
/* board type */
#if defined(CONFIG_NANONOTE)
#define CONFIG_MIPS_JZ4740_PI 1
#endif
#define mdelay(n) udelay((n)*1000)
/*
* change u-boot macro to celinux macro
*/
#define NR_PALETTE 256
struct lcd_desc{
unsigned int next_desc; /* LCDDAx */
unsigned int databuf; /* LCDSAx */
unsigned int frame_id; /* LCDFIDx */
unsigned int cmd; /* LCDCMDx */
};
#define MODE_MASK 0x0f
#define MODE_TFT_GEN 0x00
#define MODE_TFT_SHARP 0x01
#define MODE_TFT_CASIO 0x02
#define MODE_TFT_SAMSUNG 0x03
#define MODE_CCIR656_NONINT 0x04
#define MODE_CCIR656_INT 0x05
#define MODE_STN_COLOR_SINGLE 0x08
#define MODE_STN_MONO_SINGLE 0x09
#define MODE_STN_COLOR_DUAL 0x0a
#define MODE_STN_MONO_DUAL 0x0b
#define MODE_8BIT_SERIAL_TFT 0x0c
#define MODE_TFT_18BIT (1<<7)
#define STN_DAT_PIN1 (0x00 << 4)
#define STN_DAT_PIN2 (0x01 << 4)
#define STN_DAT_PIN4 (0x02 << 4)
#define STN_DAT_PIN8 (0x03 << 4)
#define STN_DAT_PINMASK STN_DAT_PIN8
#define STFT_PSHI (1 << 15)
#define STFT_CLSHI (1 << 14)
#define STFT_SPLHI (1 << 13)
#define STFT_REVHI (1 << 12)
#define SYNC_MASTER (0 << 16)
#define SYNC_SLAVE (1 << 16)
#define DE_P (0 << 9)
#define DE_N (1 << 9)
#define PCLK_P (0 << 10)
#define PCLK_N (1 << 10)
#define HSYNC_P (0 << 11)
#define HSYNC_N (1 << 11)
#define VSYNC_P (0 << 8)
#define VSYNC_N (1 << 8)
#define DATA_NORMAL (0 << 17)
#define DATA_INVERSE (1 << 17)
/* Jz LCDFB supported I/O controls. */
#define FBIOSETBACKLIGHT 0x4688
#define FBIODISPON 0x4689
#define FBIODISPOFF 0x468a
#define FBIORESET 0x468b
#define FBIOPRINT_REG 0x468c
/*
* LCD panel specific definition
*/
#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) || defined(CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL)
#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) /* board pmp */
#define MODE 0xcd /* 24bit parellel RGB */
#endif
#if defined(CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL)
#define MODE 0xc9 /* 8bit serial RGB */
#endif
#if defined(CONFIG_MIPS_JZ4740_PI) /* board pavo */
#define SPEN (32*2+21) /*LCD_SPL */
#define SPCK (32*2+23) /*LCD_CLS */
#define SPDA (32*2+22) /*LCD_D12 */
#define LCD_RET (32*3+27)
#else
#error "cpu/misp/Jzlcd.h, please define SPI pins on your board."
#endif
#define __spi_write_reg1(reg, val) \
do { \
unsigned char no;\
unsigned short value;\
unsigned char a=0;\
unsigned char b=0;\
a=reg;\
b=val;\
__gpio_set_pin(SPEN);\
__gpio_set_pin(SPCK);\
__gpio_clear_pin(SPDA);\
__gpio_clear_pin(SPEN);\
udelay(25);\
value=((a<<8)|(b&0xFF));\
for(no=0;no<16;no++)\
{\
__gpio_clear_pin(SPCK);\
if((value&0x8000)==0x8000)\
__gpio_set_pin(SPDA);\
else\
__gpio_clear_pin(SPDA);\
udelay(25);\
__gpio_set_pin(SPCK);\
value=(value<<1); \
udelay(25);\
}\
__gpio_set_pin(SPEN);\
udelay(100);\
} while (0)
#define __spi_write_reg(reg, val) \
do {\
__spi_write_reg1((reg<<2|2), val);\
udelay(100); \
}while(0)
#define __lcd_special_pin_init() \
do { \
__gpio_as_output(SPEN); /* use SPDA */\
__gpio_as_output(SPCK); /* use SPCK */\
__gpio_as_output(SPDA); /* use SPDA */\
__gpio_as_output(LCD_RET);\
} while (0)
#if defined(CONFIG_NANONOTE)
#define __lcd_special_on() \
do { \
udelay(50);\
__spi_write_reg1(0x05, 0x16); \
__spi_write_reg1(0x04, 0x0b); \
__spi_write_reg1(0x07, 0x8d); \
__spi_write_reg1(0x01, 0x95); \
__spi_write_reg1(0x08, 0xc0); \
__spi_write_reg1(0x03, 0x40); \
__spi_write_reg1(0x06, 0x15); \
__spi_write_reg1(0x05, 0xd7); \
} while (0) /* reg 0x0a is control the display direction:DB0->horizontal level DB1->vertical level */
#define __lcd_special_off() \
do { \
__spi_write_reg1(0x05, 0x5e); \
} while (0)
#endif /* CONFIG_NANONOTE */
#endif /* CONFIG_JZLCD_FOXCONN_PT035TN01 or CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL */
#ifndef __lcd_special_pin_init
#define __lcd_special_pin_init()
#endif
#ifndef __lcd_special_on
#define __lcd_special_on()
#endif
#ifndef __lcd_special_off
#define __lcd_special_off()
#endif
/*
* Platform specific definition
*/
#if defined(CONFIG_MIPS_JZ4740_PI)
/* 100 level: 0,1,...,100 */
#define __lcd_set_backlight_level(n)\
do { \
__gpio_as_output(32*3+27); \
__gpio_set_pin(32*3+27); \
} while (0)
#define __lcd_close_backlight() \
do { \
__gpio_as_output(GPIO_PWM); \
__gpio_clear_pin(GPIO_PWM); \
} while (0)
#define __lcd_display_pin_init() \
do { \
__gpio_as_output(GPIO_DISP_OFF_N); \
__cpm_start_tcu(); \
__lcd_special_pin_init(); \
} while (0)
/* __lcd_set_backlight_level(100); \*/
#define __lcd_display_on() \
do { \
__gpio_set_pin(GPIO_DISP_OFF_N); \
__lcd_special_on(); \
} while (0)
#define __lcd_display_off() \
do { \
__lcd_special_off(); \
__gpio_clear_pin(GPIO_DISP_OFF_N); \
} while (0)
#endif /* CONFIG_MIPS_JZ4740_PI) */
/*****************************************************************************
* LCD display pin dummy macros
*****************************************************************************/
#ifndef __lcd_display_pin_init
#define __lcd_display_pin_init()
#endif
#ifndef __lcd_display_on
#define __lcd_display_on()
#endif
#ifndef __lcd_display_off
#define __lcd_display_off()
#endif
#ifndef __lcd_set_backlight_level
#define __lcd_set_backlight_level(n)
#endif