openwrtv3/target/linux/brcm2708/patches-3.10/0055-Add-bitbanging-pullups-use-them-for-w1-gpio.patch

From 0a2fa5a85c2ed9599acb2215f24e06db0379a133 Mon Sep 17 00:00:00 2001
From: popcornmix <popcornmix@gmail.com>
Date: Wed, 1 May 2013 21:14:28 +0100
Subject: [PATCH 055/196] Add bitbanging pullups, use them for w1-gpio

Allows parasite power to work, uses module option pullup=1
---
 drivers/w1/masters/w1-gpio.c | 20 ++++++++++++++++++++
 drivers/w1/w1.h              |  6 ++++++
 drivers/w1/w1_int.c          | 16 +++++++++-------
 drivers/w1/w1_io.c           | 18 +++++++++++++++---
 4 files changed, 50 insertions(+), 10 deletions(-)

diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index 46d9701..f615f80 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -23,6 +23,9 @@
 #include "../w1.h"
 #include "../w1_int.h"
 
+static int w1_gpio_pullup = 0;
+module_param_named(pullup, w1_gpio_pullup, int, 0);
+
 static void w1_gpio_write_bit_dir(void *data, u8 bit)
 {
 	struct w1_gpio_platform_data *pdata = data;
@@ -47,6 +50,16 @@ static u8 w1_gpio_read_bit(void *data)
 	return gpio_get_value(pdata->pin) ? 1 : 0;
 }
 
+static void w1_gpio_bitbang_pullup(void *data, u8 on)
+{
+	struct w1_gpio_platform_data *pdata = data;
+
+	if (on)
+		gpio_direction_output(pdata->pin, 1);
+	else
+		gpio_direction_input(pdata->pin);
+}
+
 #if defined(CONFIG_OF)
 static struct of_device_id w1_gpio_dt_ids[] = {
 	{ .compatible = "w1-gpio" },
@@ -133,6 +146,13 @@ static int w1_gpio_probe(struct platform_device *pdev)
 		master->write_bit = w1_gpio_write_bit_dir;
 	}
 
+	if (w1_gpio_pullup)
+		if (pdata->is_open_drain)
+			printk(KERN_ERR "w1-gpio 'pullup' option "
+			       "doesn't work with open drain GPIO\n");
+		else
+			master->bitbang_pullup = w1_gpio_bitbang_pullup;
+
 	err = w1_add_master_device(master);
 	if (err) {
 		dev_err(&pdev->dev, "w1_add_master device failed\n");
diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h
index 45908e5..0ba75f6 100644
--- a/drivers/w1/w1.h
+++ b/drivers/w1/w1.h
@@ -148,6 +148,12 @@ struct w1_bus_master
 	 */
 	u8		(*set_pullup)(void *, int);
 
+	/**
+	 * Turns the pullup on/off in bitbanging mode, takes an on/off argument.
+	 * @return -1=Error, 0=completed
+	 */
+	void (*bitbang_pullup) (void *, u8);
+
 	/** Really nice hardware can handles the different types of ROM search
 	 *  w1_master* is passed to the slave found callback.
 	 */
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index 5a98649..a4d69b6 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -117,19 +117,21 @@ int w1_add_master_device(struct w1_bus_master *master)
 		printk(KERN_ERR "w1_add_master_device: invalid function set\n");
 		return(-EINVAL);
         }
-	/* While it would be electrically possible to make a device that
-	 * generated a strong pullup in bit bang mode, only hardware that
-	 * controls 1-wire time frames are even expected to support a strong
-	 * pullup.  w1_io.c would need to support calling set_pullup before
-	 * the last write_bit operation of a w1_write_8 which it currently
-	 * doesn't.
-	 */
+
+	/* bitbanging hardware uses bitbang_pullup, other hardware uses set_pullup
+	 * and takes care of timing itself */
 	if (!master->write_byte && !master->touch_bit && master->set_pullup) {
 		printk(KERN_ERR "w1_add_master_device: set_pullup requires "
 			"write_byte or touch_bit, disabling\n");
 		master->set_pullup = NULL;
 	}
 
+	if (master->set_pullup && master->bitbang_pullup) {
+		printk(KERN_ERR "w1_add_master_device: set_pullup should not "
+		       "be set when bitbang_pullup is used, disabling\n");
+		master->set_pullup = NULL;
+	}
+
 	/* Lock until the device is added (or not) to w1_masters. */
 	mutex_lock(&w1_mlock);
 	/* Search for the first available id (starting at 1). */
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index e10acc2..667fdd5 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -127,10 +127,22 @@ static void w1_pre_write(struct w1_master *dev)
 static void w1_post_write(struct w1_master *dev)
 {
 	if (dev->pullup_duration) {
-		if (dev->enable_pullup && dev->bus_master->set_pullup)
-			dev->bus_master->set_pullup(dev->bus_master->data, 0);
-		else
+		if (dev->enable_pullup) {
+			if (dev->bus_master->set_pullup) {
+				dev->bus_master->set_pullup(dev->
+							    bus_master->data,
+							    0);
+			} else if (dev->bus_master->bitbang_pullup) {
+				dev->bus_master->
+				    bitbang_pullup(dev->bus_master->data, 1);
+			msleep(dev->pullup_duration);
+				dev->bus_master->
+				    bitbang_pullup(dev->bus_master->data, 0);
+			}
+		} else {
 			msleep(dev->pullup_duration);
+		}
+
 		dev->pullup_duration = 0;
 	}
 }
-- 
1.9.1