openwrtv3/target/linux/ramips/dts/DAP-1522-A1.dts

140 lines
2.2 KiB
Text
Raw Normal View History

/dts-v1/;
#include "rt2880.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "dlink,dap-1522-a1", "ralink,rt2880-soc";
model = "D-Link DAP-1522 A1";
cfi@bc400000 {
compatible = "cfi-flash";
reg = <0xbc400000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
factory: partition@30000 {
label = "factory";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "firmware";
reg = <0x40000 0x3a0000>;
};
};
rtl8366s {
compatible = "realtek,rtl8366s";
gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
ap {
label = "ap";
gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
bridge {
label = "bridge";
gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
};
};
gpio-leds {
compatible = "gpio-leds";
wps {
label = "dap-1522-a1:blue:wps";
gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
};
ap {
label = "dap-1522-a1:blue:ap";
gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
};
sta {
label = "dap-1522-a1:red:sta";
gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
};
status {
label = "dap-1522-a1:blue:status";
gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
};
};
};
&gpio0 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartlite", "pci";
ralink,function = "gpio";
};
};
};
&ethernet {
status = "okay";
mtd-mac-address = <&factory 0x2004>;
port@0 {
mediatek,fixed-link = <1000 1 1 1>;
};
mdio-bus {
status = "okay";
phy0: ethernet-phy@0 {
phy-mode = "mii";
reg = <0>;
};
};
};
&wmac {
ralink,mtd-eeprom = <&factory 0x2000>;
};