openwrtv3/target/linux/ramips/files/drivers/usb/host/xhci-mtk.h

#ifndef _XHCI_MTK_H
#define _XHCI_MTK_H

#include <linux/usb.h>
#include "xhci.h"

#define SSUSB_U3_XHCI_BASE		0xBE1C0000
#define SSUSB_U3_MAC_BASE		0xBE1C2400
#define SSUSB_U3_SYS_BASE		0xBE1C2600
#define SSUSB_U2_SYS_BASE		0xBE1C3400
#define SSUB_SIF_SLV_TOP		0xBE1D0000
#define SIFSLV_IPPC			(SSUB_SIF_SLV_TOP + 0x700)

#define U3_PIPE_LATCH_SEL_ADD 		SSUSB_U3_MAC_BASE + 0x130
#define U3_PIPE_LATCH_TX		0
#define U3_PIPE_LATCH_RX		0

#define U3_UX_EXIT_LFPS_TIMING_PAR	0xa0
#define U3_REF_CK_PAR			0xb0
#define U3_RX_UX_EXIT_LFPS_REF_OFFSET	8
#define U3_RX_UX_EXIT_LFPS_REF		3
#define	U3_REF_CK_VAL			10

#define U3_TIMING_PULSE_CTRL		0xb4
#define CNT_1US_VALUE			63 //62.5MHz:63, 70MHz:70, 80MHz:80, 100MHz:100, 125MHz:125

#define USB20_TIMING_PARAMETER		0x40
#define TIME_VALUE_1US			63 //62.5MHz:63, 80MHz:80, 100MHz:100, 125MHz:125

#define LINK_PM_TIMER			0x8
#define PM_LC_TIMEOUT_VALUE		3

#define XHCI_IMOD			0x624
#define XHCI_IMOD_MT7621_VALUE		0x10

#define SSUSB_HDMA_CFG			0x950
#define SSUSB_HDMA_CFG_MT7621_VALUE	0x10E0E0C

#define U3_LTSSM_TIMING_PARAMETER3		0x2514
#define U3_LTSSM_TIMING_PARAMETER3_VALUE	0x3E8012C

#define U2_PHYD_CR1			0x64

#define SSUSB_IP_SPAR0			0xC8

#define SYNC_HS_EOF			0x938
#define SYNC_HS_EOF_VALUE		0x201F3

#define HSCH_CFG1			0x960
#define SCH2_FIFO_DEPTH_OFFSET		16


#define SSUSB_IP_PW_CTRL		(SIFSLV_IPPC+0x0)
#define SSUSB_IP_SW_RST			(1<<0)
#define SSUSB_IP_PW_CTRL_1		(SIFSLV_IPPC+0x4)
#define SSUSB_IP_PDN			(1<<0)
#define SSUSB_U3_CTRL(p)		(SIFSLV_IPPC+0x30+(p*0x08))
#define SSUSB_U3_PORT_DIS		(1<<0)
#define SSUSB_U3_PORT_PDN		(1<<1)
#define SSUSB_U3_PORT_HOST_SEL		(1<<2)
#define SSUSB_U3_PORT_CKBG_EN		(1<<3)
#define SSUSB_U3_PORT_MAC_RST		(1<<4)
#define SSUSB_U3_PORT_PHYD_RST		(1<<5)
#define SSUSB_U2_CTRL(p)		(SIFSLV_IPPC+(0x50)+(p*0x08))
#define SSUSB_U2_PORT_DIS		(1<<0)
#define SSUSB_U2_PORT_PDN		(1<<1)
#define SSUSB_U2_PORT_HOST_SEL		(1<<2)
#define SSUSB_U2_PORT_CKBG_EN		(1<<3)
#define SSUSB_U2_PORT_MAC_RST		(1<<4)
#define SSUSB_U2_PORT_PHYD_RST		(1<<5)
#define SSUSB_IP_CAP			(SIFSLV_IPPC+0x024)

#define SSUSB_U3_PORT_NUM(p)		(p & 0xff)
#define SSUSB_U2_PORT_NUM(p)		((p>>8) & 0xff)


#define XHCI_MTK_TEST_MAJOR		234
#define DEVICE_NAME			"xhci_mtk_test"

#define CLI_MAGIC			'CLI'
#define IOCTL_READ			_IOR(CLI_MAGIC, 0, int)
#define IOCTL_WRITE			_IOW(CLI_MAGIC, 1, int)

void reinitIP(void);
void setInitialReg(void);
void dbg_prb_out(void);
int call_function(char *buf);

long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
int xhci_mtk_test_open(struct inode *inode, struct file *file);
int xhci_mtk_test_release(struct inode *inode, struct file *file);
ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr);
ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos);

/*
  mediatek probe out
*/
/************************************************************************************/

#define SW_PRB_OUT_ADDR		(SIFSLV_IPPC+0xc0)
#define PRB_MODULE_SEL_ADDR	(SIFSLV_IPPC+0xbc)

static inline void mtk_probe_init(const u32 byte){
	__u32 __iomem *ptr = (__u32 __iomem *) PRB_MODULE_SEL_ADDR;
	writel(byte, ptr);
}

static inline void mtk_probe_out(const u32 value){
	__u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;
	writel(value, ptr);
}

static inline u32 mtk_probe_value(void){
	__u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;

	return readl(ptr);
}


#endif